• Toxicological Research
• /
• v.13 no.4
• /
• pp.323-325
• /
• 1997

Ag-Os, water treatment agent, was administered orally to ICR mice and Sprague-Dawley rats to investigate the acute oral toxicity. $LD_{50}$ values were above 5 g/kg, 2,000 fold higher than the expected concentration in water, in both species with oral administration. There were also no differences in body weight changes, clinical signs and atopsy findings between all treated groups and control group. Therefore, it was concluded that Ag-Os is a very safe compound.

• Geomechanics and Engineering
• /
• v.17 no.6
• /
• pp.543-551
• /
• 2019

In China, serious environmental problems are induced by the extremely soft construction waste slurries in many urban areas, and there is no appropriate method to treat it presently. In this paper, four model tests were conducted to investigate the efficiency of waste slurry treatment by combining three conditioning agents which can change characteristics of the slurries with a traditional vacuum preloading method. The tests of size analysis of particle aggregate were conducted to investigate the influence of different conditioning agents on the size distributions of particle aggregate. During the model test, the discharged water volumes were monitored. The pore-size distribution and void ratio of the waste slurries after the vacuum preloading were measured by mercury intrusion porosimetry (MIP). It is found that 1) During the natural precipitation, volume of water out of the organic agent is higher than that of the mixed agent, but it is smaller than that of the mixed agent in the vacuum preloading stage; 2) the mixed agent has a higher total volume of water out than the organic agent and the inorganic agent after test, while the organic agent and the inorganic agent have little difference with respect to the drainage effect. The results demonstrate that the combination of mixed conditioning agent and vacuum preloading for the solid-liquid separation in waste slurry has a satisfactory effect and can be applied in engineering practice.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.31-36
• /
• 2002

Recently, more interests in surface treatment of structure with water repellent agent are steadily increased, But, investigation of its properties such as protection, durability, morphology of micro structure is not sufficient. Therefore, This paper is aimed for the investigation of water repellent property and change of morphology of micro pores in mortar that is treated by water repellent agent(Inorganic polymer based material). Water repellent property, water absorption coefficient, air permeability, porosity and the observation of micro structure was investigated in different water repellent agent type. The test results indicated that water repellent treated mortar showed low absorption coefficient and air permeability(breathing effect). This is why inorganic polymer is coated at the wall of capillary and micro pores, also, the volume of micro pore is reduced without the change of morphology in micro structure.

• Journal of the Korea Convergence Society
• /
• v.11 no.10
• /
• pp.213-217
• /
• 2020

An eco-friendly water purifier was developed using natural minerals, plants, and sludge from water purification plants. A wastewater complex treatment system using this water purification agent was developed. The wastewater complex treatment system goes through the process of inflow of contaminated water, input of water purification agent, operation of a pressurized flotation device, sludge flotation, sludge collection and treatment water discharge. This device was applied to the removal of green algae in livestock desorption liquid, broiler washing water, factory wastewater, sewage treatment plant and pond to obtain excellent removal rate. The use of natural water purification agents for organic waste purification has not been investigated.

• Fashion & Textile Research Journal
• /
• v.3 no.1
• /
• pp.42-47
• /
• 2001

The hardening system of polyurethanes has usually caused by air pollution. bad working condition and fire hazard according to using orgarnic solvents. Therefore there have been researched on emulsion, water soluble and colloid-dispersion based water soluble instead of using organic solvents recently. This study synthesized polyurethane dispersing particle by means of mixing precursor and neutralized emulsion method. In the first step, polyurethane was preparated from isophorone diisocyanate and poly (ethylene-adipate) glycol, and got precursor by introducing dimethyl propionic acid as a hydrophilic group. Synthesized polyurethane was bonded to the surface of fiber and crosslinked as a anti-static agent, and then looked for the change of color and softening property.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.5
• /
• pp.213-218
• /
• 2002

In order to develop the economic and environmental water-soluble black coloring agent, some adequate chemical mixtures were mixed and this solution was applied to coat quenched and tempered 51B20 steel bolt. Some basic properties of the solution and characteristics of the coated film in addition to the corrosion resistance were investigated. The developed 100 kg of water-soluble black coloring agent solution was a chemical mixture consisted of 10 kg of aqueous coloring agent, 40 kg of surface active agent, 0.3 kg of anti-foam agent and $50{\ell}$ of water. The coated film of the bolt was composed of hard layer of about $2{\mu}m$ and the disbondable soft layer of about $4{\mu}m$ above the hard layer. Many surface active agents peaks and a few hydrophilic peaks were observed in the coated film. Surface roughness value of the coated bolt was lower than that of the non-coated bolt. Corrosion resistance of the coated bolt considerably improved and also relatively showed a good polarization resistance at test condition of $40^{\circ}C$ colorizing temperature and 5% the solution concentration in 3% NaCl anodic polarization test. Initial appearance time of the surface rust was greatly retarded owing to the coated film in salt spray test.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.26-34
• /
• 2008

Wool fabric having high moisture content were treated with fluorocarbon-based water and oil repellent finishing agents by pad-dry-cure system. Three types of finishing agents which were regular-type or nano-type were adapted to compare the surface chemical composition, water and oil repellent property, crease recovery angle, and durability to repeated laundering. From the surface chemical compositions resulted by ESCA and C1s curve-fitting, it was shown that the regular-type finishing agent were easily taken off from the finished wool fabrics after repeated laundering. On the other hand, the fluoroalkyl groups of nano-type finishing agents turned round from fabric surface to fiber internal after repeated laundering. The water repellency of the wool fabrics treated with regular-type agent had a little changes according to the treatment condition changes and sharply decreased with repeated laundering. However, these values when treated with nano-type agents increased with the concentration and cure temperature and were maintained after 20 times laundering. The wool fabrics treated with nano-type agent had a great oil repellency irrespective of treatment conditions. Furthermore, the wrinkle recovery values of the wool fabrics treated with nano-type agents were higher than those of the fabrics treated with regular-type agent and were unchanged after 20 times laundering.

• KSBB Journal
• /
• v.25 no.1
• /
• pp.103-107
• /
• 2010

Oil degradation agent was developed with organic sludge and modified peat moss (MPM) to recover oil contaminated soil. Waste sludge discharged from wastewater treatment plant of chemical plant in Ulsan National Industrial Park was used as organic sludge, and MPM was purchased. Organic sludge was adequate to use as growth medium for microorganism, the surface of MPM had porous structure which could enhance the cultivation condition of oil degradation microorganisms. Water contents and TPH variation with time were observed to investigate the degradation capacity of developed degradation agent. Water contents were rapidly decreased with higher contents of MPM, however, in case of TPH, high MPM content decreased the degradation capacity. Therefore, it was recommended that the content of MPM was controlled to below 10% in degradation agent as mixing organic sludge with MPM.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.3
• /
• pp.50-58
• /
• 2005

It is generally known that paper industry is the second largest industry in the use of process water, and also have the highest environmental impact load in the contaminant sources. Paper is produced from the mixtures composed of 1% fibrous raw materials and 99% water. The optimum use of process water effects on the quality properties of paper and the environmental impact load of waste water treatment. In this research, the kinds of fibrous raw material & additives used in the paperboard production line were investigated, and the quantification of environmental loads and the environmental effects of process water on COD potential were evaluated. The NBDCODs were also analyzed from process water by the method of waste water treatment in paper mill and applied for the optimum use of recycling water, and zero effluent process. In the fibrous raw materials, KOCC caused the highest COD potentials, and sack paper & UKP was comparatively low. The NBDCOD of KOCC largely reduced after biological treatment because of easily biodegradable properties, but AOCC contained non-biodegradable materials. In chemical additives, COD was high in turns of rosin>starch>deaeration agent>dye, NBDCOD greatly reduced in starch and deaeration agent. In the case of 2 kinds of paperboard product, the COD potentials was mainly high in starch, AOCC and KOCC.

• Membrane and Water Treatment
• /
• v.8 no.5
• /
• pp.463-481
• /
• 2017

Bacteria have been considered as a major foulant that initiates the formation of biofilm on the polymeric membrane surface. Some polymeric membranes are naturally antibacterial and have low fouling properties, however, numerous efforts have been devoted to improve their antibacterial performance. These modifications are mostly carried out through blending the membrane with an antibacterial agent or introducing the antibacterial agent on the membrane surface by chemical grafting. Currently, a significant number of researches have reported nanocomposite membrane as a new approach to fabricate an excellent antibacterial membrane. The antibacterial nanoparticles are dispersed homogenously in membrane structure by blending method or coating onto the membrane surface. Aim of the modifications is to prevent the initial attachment of bacteria to membrane surface and kill bacteria when attached on the membrane surface. In this paper, several studies on antibacterial modified membranes, particularly for water treatment, will be reviewed comprehensively. Special attention will be given on polymeric membrane modifications by introducing antibacterial agents through different methods, such as blending, grafting, and coating.