• 제목/요약/키워드: water surface resonance

검색결과 94건 처리시간 0.021초

진동수로 내장 해수교환방파제의 수로길이 변화에 따른 수위공진 (Effects of the Oscillating Water Channel Length on the Water Surface Elevation within Seawater Exchange Breakwater)

  • 이달수;오영민;전인식;김창일
    • Ocean and Polar Research
    • /
    • 제25권spc3호
    • /
    • pp.423-426
    • /
    • 2003
  • The seawater exchange breakwater equipped with an oscillating water channel and water transmitting pipes has a very spectacular function that seawater supply can be greatly increased due to the upsurge of the water surface inside the channel at resonance condition which can be reached when the incident wave period becomes close to the natural period of the channel. The variations of the water level and period inside the channel are very important factors in enhancing the efficiency of sea water exchange, especially when designing the breakwater cross-section in shallow water zone which requires longer resonance period with the elongated horizontal projection of the channel. In the present study, a hydraulic experiment was performed varying the length of the oscillating channel, and the resonance periods and water surface variations are analyzed in terms of water transmission through the pipes.

구형 용기 내 자성유체의 슬로싱 특성에 관한 실험적 연구 (Experimental Study on Sloshing Characteristics of a Ferrofluid in the Spherical Container)

  • 김대완;이무연;서이수
    • 한국자기학회지
    • /
    • 제23권5호
    • /
    • pp.173-177
    • /
    • 2013
  • 본 연구에서는 구형(sphere) 용기 내 작동유체로 물과 자성유체(ferrofluid)를 사용하였을 경우의 구형 용기의 병진 운동에 따른 슬로싱(sloshing) 현상에 대하여 실험적으로 고찰하였고 두 가지 작동유체에서 나타나는 특성을 비교하였다. 구형 용기의 병진운동에 따른 슬로싱 현상을 고찰하기 위하여, 자기장(magnetic field)을 0 mT에서 50 mT로 변화시키고, 가진 진폭을 5 mm에서 15 mm로 변화시켜가면서 실험을 수행하였다. 결과적으로, 구형 용기내의 자성유체는 자기장를 인가하지 않았을 때 물과 유사한 액면거동 현상을 나타내었고, 자성유체에 인가되는 자기장 세기가 증가할수록 공진점(resonance point) 발생이 이론공진주파수(theoretical resonance frequency)보다 높은 영역에서 발생함을 확인하였다. 즉 용기 내 슬로싱은 자성유체를 사용할 경우 인가 자기장의 크기에 따라 공진점이 발생하는 공진주파수를 제어할 수 있으며 액면 변위의 크기를 제어할 수 있었다.

DEM numerical study on mechanical behaviour of coal with different water distribution models

  • Tan, Lihai;Cai, Xin;Ren, Ting;Yang, Xiaohan;Rui, Yichao
    • Structural Engineering and Mechanics
    • /
    • 제80권5호
    • /
    • pp.523-538
    • /
    • 2021
  • The mechanical behaviour and stability of coal mining engineering underground is significantly affected by ground water. In this study, nuclear magnetic resonance imaging (NMRI) technique was employed to determine the water distribution characteristics in coal specimens during saturation process, based on which the functional rule for water distribution was proposed. Then, using discrete element method (DEM), an innovative numerical modelling method was developed to simulate water-weakening effect on coal behaviour considering moisture content and water distribution. Three water distribution numerical models, namely surface-wetting model, core-wetting model and uniform-wetting model, were established to explore the water distribution influences. The feasibility and validity of the surface-wetting model were further demonstrated by comparing the simulation results with laboratory results. The investigation reveals that coal mechanical properties are affected by both water saturation coefficient and water distribution condition. For all water distribution models, micro-cracks always initiate and nucleate in the water-rich area and thus lead to distinct macro fracture characteristics. With the increase of water saturation coefficient, the failure of coal tends to be less violent with less cracks and ejected fragments. In addition, the core-wetting specimen is more sensitive to water than specimens with other water distribution models.

A Novel Photonic Crystal Fiber Sensor with Three D-shaped Holes Based on Surface Plasmon Resonance

  • Bing, Pibin;Sui, Jialei;Huang, Shichao;Guo, Xinyue;Li, Zhongyang;Tan, Lian;Yao, Jianquan
    • Current Optics and Photonics
    • /
    • 제3권6호
    • /
    • pp.541-547
    • /
    • 2019
  • A novel photonic crystal fiber (PCF) sensor with three D-shaped holes based on surface plasmon resonance (SPR) is analyzed in this paper. Three D-shaped holes are filled with the analyte, and the gold film is deposited on the side of three planes. The design of D-shaped holes with outward expansion can effectively solve the uniformity problem of metallized nano-coating, it is beneficial to the filling of the analyte and is convenient for real-time measurement of the analyte. Compared with the hexagonal lattice structure, the triangular arrangement of the clad air holes can significantly reduce the transmission loss of light and improve the sensitivity of the sensor. The influences of the air hole diameter, the distance between D-shaped holes and core, and the counterclockwise rotation angle of D-shaped holes on sensing performance are studied. The simulation results show that the wavelength sensitivity of the designed sensor can be as high as 10100 nm/RIU and the resolution can reach 9.9 × 10-6 RIU.

표면플라즈몬공명 가시화 장치를 이용한 증발하는 이종혼합물 액적의 실시간 농도 가시화 기법 개발 (Development of the Real-time Concentration Measurement Method for Evaporating Binary Mixture Droplet using Surface Plasmon Resonance Imaging)

  • 정찬호;이형주;최창경;이형순;이성혁
    • 한국분무공학회지
    • /
    • 제26권4호
    • /
    • pp.212-218
    • /
    • 2021
  • The present study aims to develop the Surface Plasmon Resonance (SPR) imaging system facilitating the real-time measurement of the concentration of evaporating binary mixture droplet (BMD). We introduce the theoretical background of the SPR imaging technique and its methodology for concentration measurement. The SPR imaging system established in the present study consists of a LED light source, a polarizer, a lens, and a band pass filter for the collimated light of a 589 nm wavelength, and a CCD camera. Based on the Fresnel multiple-layer reflection theory, SPR imaging can capture the change of refractive index of evaporating BMD. For example, the present study exhibits the visualization process of ethylene glycol (EG)-water (W) BMD and measures real-time concentration change. Since the water component is more volatile than the ethylene glycol component, the refractive index of EG-W BMD varies with its mixture composition during BMD evaporation. We successfully measured the ethylene glycol concentration within the evaporating BMD by using SPR imaging.

결합형 유한요소-경계요소 기법을 사용한 심해저용 압전형 유연성 쏘나 트랜스듀서의 구조 설계 (Structural design of a piezoelectric flextentional deep-water sonar transducer using a coupled FE-BEM)

  • 장순석;정운관
    • 센서학회지
    • /
    • 제8권5호
    • /
    • pp.377-387
    • /
    • 1999
  • 결합형 유한요소-경계요소 기법을 사용하여 심해저용 유연형 압전체 쏘나 트랜스듀서를 설계하였다. 쏘나 트랜스듀서의 역학적 구동을 3차원적으로 모델링하였고 전기적 외부 부하 조건을 가지고 분석하였다. 쏘나 트랜스듀서의 정상 상태 변위 모드, 지향성, 공진 주파수, TVR과 같은 결과들을 보였다. 본 논문의 술통 형태의 압전체 쏘나 트랜스듀서를 설계하면서, 심해저용으로 사용하기 위해 쏘나 트랜스듀서의 내외부에 동일한 수압이 가해지도록 쏘나 트랜스듀서의 외부 표면 구조를 새롭게 변형시킨 결과 낮은 주파수의 새로운 공진 모드가 발생하였으나 그 크기는 외부 표면 구조 변형의 정도에 따라 조절될 수 있다.

  • PDF

진동 수주형 축대칭 부유식 파력발전장치의 성능평가 (Performance Evaluation of an Axisymmetric Floating Wave Power Device with an Oscillating Water Column in the Vertical Cylinder)

  • 박우선;정신택;최혁진;이욱재
    • 한국해안·해양공학회논문집
    • /
    • 제30권1호
    • /
    • pp.29-38
    • /
    • 2018
  • 축대칭 진동수주형 부유식 파력발전의 성능을 평가하기 위하여 PTO를 고려한 선형화된 자유수면경계조건을 유도하여 유한요소 수치모델을 수립하였다. 발전효율에 영향을 미칠 것으로 판단되는 동력인출장치(PTO)가 설치되는 실린더내 수주의 공진현상과 부유체의 heave 공진현상에 직접적으로 영양을 줄 수 있는 설계변수인 실린더 및 스커트 길이, 그리고, 수심을 변화시키며 수치실험을 실시하여 발전시스템의 최적설계에 필요한 기초 자료를 확보하였다. 연구결과, 발전시스템의 효율은 실린더내 진동수주의 공진보다는 부유체의 heave 운동 공진에 지배되며, 부이 외측에 스커트를 부착함으로써 효율적으로 공진조건을 변화시킬 수 있음을 확인하였다.

INTERACTION OF SURFACE WATER WAVES WITH SMALL BOTTOM UNDULATION ON A SEA-BED

  • Martha, S.C.;Bora, S.N.;Chakrabarti, A.
    • Journal of applied mathematics & informatics
    • /
    • 제27권5_6호
    • /
    • pp.1017-1031
    • /
    • 2009
  • The problem of interaction of surface water waves by small undulation at the bottom of a laterally unbounded sea is treated on the basis of linear water wave theory for both normal and oblique incidences. Perturbation analysis is employed to obtain the first order corrections to the reflection and transmission coefficients in terms of integrals involving the shape function c(x) representing the bottom undulation. Fourier transform method and residue theorem are applied to obtain these coefficients. As an example, a patch of sinusoidal ripples is considered in both the cases as the shape function. The principal conclusion is that the reflection coefficient is oscillatory in the ratio of twice the surface wave number to the wave number of the ripples. In particular, there is a Bragg resonance between the surface waves and the ripples, which is associated with high reflection of incident wave energy. The theoretical observations are validated computationally.

  • PDF

Cupric Ion Species in Cu(II)-Exchanged Mesoporous MCM-41 Gallosilicate Determined by Electron Spin Resonance Studies

  • Kim, Jeong-Yeon;Yu, Jong-Sung
    • 한국자기공명학회논문지
    • /
    • 제1권2호
    • /
    • pp.126-140
    • /
    • 1997
  • Mesoporous MCM-41 gallosilicate material was synthesized through shifting through shifting gallosilicate polymer equilibrium towards a MCM-41 phase by addition of acid. The location of Cu(II) exchanged into MCM-41 and its interaction with various adsorbate molecules were investigated by electron spin responance and electron spin echo modulation spectroscopies. It was found that in the fresh hydrated material, Cu(II) is octahedrally coordinated to six water molecules. This species is located in a cylindrical channel and rotates rapidly at room temperature. Evacuation at room temperature removes three of these water molecules, leaving the Cu (II) coordinated to three water molecules and anchored to oxygens in the channel wall. Dehydration at 45$0^{\circ}C$ produces one Cu (II) species located in the inner surface of a channel as evidenced by broadening of its ESR lines by oxygen. Adsorption of polar molecules such as water, methanol and ammonia on dehydrated CuNa-MCM-41 gallosilicate material causes changes in the ESR spectrum of Cu (II), indicating the complex formation with these adsorbates. Cu (II) forms a complex with six molecules of methanol as evidenced by an isotropic room temperature ESR signal and ESEM data like upon water adsorption. Cu(II) also forms a complex containing four molecules of ammonia based on resolved nitrogen superhyperfine interaction.

  • PDF

Parametric studies on sloshing in a three-dimensional prismatic tank with different water depths, excitation frequencies, and baffle heights by a Cartesian grid method

  • Jin, Qiu;Xin, Jianjian;Shi, Fulong;Shi, Fan
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제13권1호
    • /
    • pp.691-706
    • /
    • 2021
  • This paper aims to numerically investigate violent sloshing in a partially filled three-dimensional (3D) prismatic tank with or without a baffle, further to clarify the suppressing performance of the baffle and the damping mechanism of sloshing. The numerical model is based on a Cartesian grid multiphase flow method, and it is well validated by nonlinear sloshing in a 3D rectangular tank with a vertical baffle. Then, sloshing in an unbaffled and baffled prismatic tank is parametrically studied. The effects of chamfered walls on the resonance frequency and the impact pressure are analyzed. The resonance frequencies for the baffled prismatic tank under different water depths and baffle heights are identified. Moreover, we investigated the effects of the baffle on the impact pressure and the free surface elevation. Further, the free surface elevation, pressure and vortex contours are analyzed to clarify the damping mechanism between the baffle and the fluid.