• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7795-7801
• /
• 2015

The aim of the present research was to establish primary characteristics of electron beams for a Varian 2100C/D linear accelerator with recently developed PRIMO Monte Carlo software and to verify relations between electron energy and dose distribution. To maintain conformity of simulated and measured dose curves within 1%/1mm, mean energy, Full Width at Half Maximum (FWHM) of energy and focal spot FWHM of initial beam were changed iteratively. Mean and most probable energies were extracted from validated phase spaces and compared with related empirical equation results. To explain the importance of correct estimation of primary energy on a clinical case, computed tomography images of a thorax phantom were imported in PRIMO. Dose distributions and dose volume histogram (DVH) curves were compared between validated and artificial cases with overestimated energy. Initial mean energies were obtained of 6.68, 9.73, 13.2 and 16.4 MeV for 6, 9, 12 and 15 nominal energies, respectively. Energy FWHM reduced with increase in energy. Three mm focal spot FWHM for 9 MeV and 4 mm for other energies made proper matches of simulated and measured profiles. In addition, the maximum difference of calculated mean electrons energy at the phantom surface with empirical equation was 2.2 percent. Finally, clear differences in DVH curves of validated and artificial energy were observed as heterogeneity indexes were 0.15 for 7.21 MeV and 0.25 for 6.68 MeV. The Monte Carlo model presented in PRIMO for Varian 2100 CD was precisely validated. IAEA polynomial equations estimated mean energy more accurately than a known linear one. Small displacement of R50 changed DVH curves and homogeneity indexes. PRIMO is a user-friendly software which has suitable capabilities to calculate dose distribution in water phantoms or computerized tomographic volumes accurately.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.3
• /
• pp.264-270
• /
• 2005

This study was performed to evaluate the effect of red-yeast-rice on blood lipids and also to investigated the relation of blood lipids, bone related hormones, and bone mineral density in overiectomized rats. Forty female rats (body weight $210\pm5$g) were divided into two groups. The rats in the first group were ovariectomized which the others received sham operation (SHAM). And then each rat group was further divided into control diet $(casein\;20\%)$ and red-yeast-rice powder supplemented $(0.1\%)$ diet group. All rats were fed on experimental diet and deionized water ad libitum for 9 weeks. Bone mineral density (BMD) and bone mineral content (BMC) were measured using PIXImus in spine and femur. Bone formation and bone resorption were measured by serum osteocalcin and urinary deoxypyridinoline (DPD) crosslinks value. Serum growth hormone, IGF-1 and calcitonin were analyzed using radioimmunoassay kits. The red-yeast-rice group had significantly lower the blood triglyceride concentration and had lower the blood total cholesterol concentration than casein group did in ovariectomized rats. And the red-yeast-rice group than casein group in ovariectomized rats. The red-yeast-rice group had significantly lower the atherogenic index than control group within the ovariectomized groups. In the experimental rats, serum total cholesterol concentration was negatively correlated with femur BMC and crosslink value. Crosslink value was negatively correlated with spine BMC and IGF-1. Osteocalcin concentration was negatively correlated with crosslink value. Growth hormone was negatively correlated with crosslink value and positively correlated with spine BMC. The findings of this study suggest that red-yeast-rices are beneficial for blood lipid in ovariectomized rats. And when considering a population-based public health approach to lowering cholesterol and bone loss, and preventing coronary heart disease and osteoporosis, the red-yeast-rice dietary supplement could provide a new approach for the maintenance of healthier cholesterol and bone.

• 한국해양학회지
• /
• v.30 no.1
• /
• pp.1-12
• /
• 1995

The modal analysis was carried out for the total of 216 subface sediments of southern continental shelf of Korean peninsula. Sandy mud or muddy sand distributed in the range of 70∼100 m water depth revealed the bimodal type (sand and mud components). The relations of textural parameters obtained from every modal were consistent with those of shallow marine sediments. The characteristics of sand component between bimodal were as follows: (1) the distributions of mean grain size, sorting, shell content were repeatedly distributed like the directions of depth contour lines. (2) Sand component was composed of medium to fine sand (Mz, 1-3$\psi$) containing many shell fragments, a few pebbles, and iron-stained quartz. (3) The surface of quartz revealed the concordial breakage and V-shaped features formed at high energy environment. (4) In CM-pattern, sand component was plotted in rolling and bottom suspension area. These characteristics imply that sand component probably derives from shoreface sediments deposited at the beach environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.115-126
• /
• 1990

In the past, seawall and sea dike very higher than sea-water elevation had been constructed mainly to prevent the wave overtopping volume. However, the coastal zone is recently developed for the multipurpose of not only preventing from the coastal disaster but conserving the coastal environment and utilizing the coastal space. In this sense, this paper deals with the artificial reef being able to reduce the overtopping volume. Relations of the overtopping volume to the breaking wave are briefly reviewed theoretically, and fundamental factor affecting it are also obtained experimentally form the artificial reef with the irregular waves, In addition, the numerical simulation is developed to investigate the effects of spectral band width for the overtopping volume. The most effective artificial reef section to reduce the overtopping volume is proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.4
• /
• pp.11-19
• /
• 1986

This study aims at the elucidation of the distribution of longshore currents after wave breaking. Longshore currents have relations to the beach process and dispersion of contaminants in the nearshore region, thus the understanding of its. mechanism is very important. In the present study, using the electromagnetic current meter, the water particle velocity is measured in the 3-dimensional wave field and Eulerian mean velocity is obtained. At the same time, from the dispersion of tracer, the Lagrangian mean velocity is also obtained. It is observed that the longshore currents were confined within the surf zone and the maximum value of them exists in the surf zone. The longshore currents were considered to be constant toward the depth and we obtained the similar distribution of longshore currents between the measured value and the theoretical ones by Longuet-Higgins model.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.188-198
• /
• 2013

Advancement toward aging society has presented the importance of house planning in consideration of the elderly, increasing the necessity of such planning. Therefore the importance of indoor design guideline for elderly houses has been stressed and the understanding of the aging in regard to this trend will create more mature spaces. In line with this trend the purpose of this study is to study the medical factors related with bathroom interior design guidelines of the existing elderly houses from the viewpoint of deteriorating physical functions due to aging process. In order to research the deterioration of physical functions due to aging literatures of medical and exercise physiology were used and concerning the existing bathroom design guidelines for the aged people, the guideline items of behavior facilitation, physiological maintenance and perceptual maintenance aspects out of Murtha & Lee's user benefit criteria(1976) related with physical functions were selected to research in relation with the knowledge about the deterioration phenomena of physical functions. Physical aging and deterioration aspects were classified from the viewpoint of musculoskeletal disorder, cardiovascular disorder, respiratory disorder, gastronomy disorder, urology disorder, somatosensory disorder, endocrine disorder, immune disorder, nervous disorder and skin diseases and these were utilized in interpreting total 100 items of bathroom design guideline. Because bathroom is the space where many physical movements are done, it had the closest relationship with the deterioration of musculoskeletal health in general and as bathroom is the space where people use water and feel the difference in temperature and moisture more than other spaces, deterioration of skin and somatosensory health had the next closest relationship. The result of this study revealed that regarding the deterioration of physical functions of the elderly people in aspect of their perceptibility as designers will design creatively and sincerely based on its relationship with nervous system in future, the result of this study will be used to develop better spatial designs efficiently to meet for the aging society.

• Korean Journal of Food Science and Technology
• /
• v.17 no.4
• /
• pp.240-244
• /
• 1985

Curde $\beta$-amylase was prepared by frationation of the water extracts from Korean ginseng, Panax Ginseng C.A. Meyer, with 0.2-0.6 saturation of ammonium sulfate. The enzyme showed the typical properties of $\beta$-amylase, producing only maltase from starch. The enzyme preparation also showed no maltase activity. The enzyme was stable at the pH 5-9 and at the temperature below $40^{\circ}C$. The enzyme showed the optimum pH at 5.0 and the optimum temperature at $35^{\circ}C$. Its activities had proportional relations with substrate concentration below 12 mg%, showing Km V slues of 4.76 mg%. The enzyme was inhibited by $Ag^{+}$, $Hg^{++}$, $Cd^{++}$, $Cu^{++}$,$ Al^{3+}$, and $Fe^{3+}$.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.5
• /
• pp.68-79
• /
• 1998

In the years, the concern about high-strength concrete which is new material has been heightened as a result of active research and development. Recently, as the building structure has been being bigger, higher, longer and more specialized, the demand of material with high-strength concrete for building has been increasing. The demand of high -strength concrete is expected to increase with expansion of usage about the complex concrete structures such as bridge structure as well as nuclear plants, underground structures, hydraulic structures and arctic area sturctures. In this research, silica-fume was used as an admixture in order to get a high-strength concrete. Water/binder ration was limited no more than 18 percent and the amount of unit cement was increased. In this study, a number of trial in concrete mix was carried out to get optimal mix design, and the target slump with $10{\pm}2cm$ was set for in-situ construction. High-strength concrete with cylinder strength of 1,200kgf/$cm^2$ in the 28-days was produced and tested. The static test was carried out to measure the ultimate load, the initial load of flexural and diagonal cracking, crack patterns, fracture modes. The load versus strain and load versus deflection relations were obtained form the static test. The test results were compared with the shear strengths predicted by the equations of ACI code 318-89 and orther researchers. Based on the test results, shear strength equation of reinforced concrete beam using high strength concrete was proposed. Form an evaluation of the results of this experimental investigation, it was concluded that shear strength after diagonal tention cracking diminished with the increase in compressive strength for beams.

• Korean Journal of Ecology and Environment
• /
• v.43 no.4
• /
• pp.503-512
• /
• 2010

This study was conducted to evaluate fish fauna, species composition, and various guilds against stream orders along with analysis of fish community structure and diversity in Geum River watershed from 2005 to 2007. The total number of fish collected was 4,216 representing 12 families with 56 species. Zacco platypus was the most abundant fish species with 26% in relative abundance (RA). Korean endemic species were 24 species including Zacco koreanus, Microphysogobio yaluensis, Gobiobotia nakdongensis, and Iksookimia koreensis, etc. We also collected endangered fish species such as G. nakdongensis, Liobagrus obesus, and Pseudopungtungia nigra, etc., and their new distribution sites were found in the survey, providing some sites of the fish conservation and protection. Fish tolerance and trophic guilds analysis showed that the proportion of sensitive species, intermediate species, and tolerant species were 33.4%, 29.3%, and 37.3%, respectively and omnivores and insectivores were 48.1 % and 38.4%, respectively. Analysis of site-base study indicated that tolerant species and omnivore species were high in some polluted tributary streams (i.e., Gap and Miho stream) and sensitive and insectivore species were low. In the functional relations, expressed as simple linear regression equations, of stream order on fish metric attributes, showed that the number of species and the number of individuals increased as the stream order increases. This phenomenon was explained by greater availability of stable water volume, rich food, and higher physical habitat capacity. Such guild compositions and stream order characteristics of the river influenced the community structures, based on species diversity, dominance and evenness index in the study. This study may be used as important data in the future for comparisons of fish fauna and compositions before and after two weir (dam) constructions in the middle of Geum River by the government.

• Structural Engineering and Mechanics
• /
• v.75 no.6
• /
• pp.747-769
• /
• 2020

This paper provides a semi-analytical approach to investigate the variations of 3D displacement components, electric potential, stresses, electric displacements and transverse vibration frequencies in laminated piezoelectric composite plates based on the scaled boundary finite element method (SBFEM) and the precise integration algorithm (PIA). The proposed approach can analyze the static and dynamic responses of multilayered piezoelectric plates with any number of laminae, various geometrical shapes, boundary conditions, thickness-to-length ratios and stacking sequences. Only a longitudinal surface of the plate is discretized into 2D elements, which helps to improve the computational efficiency. Comparing with plate theories and other numerical methods, only three displacement components and the electric potential are set as the basic unknown variables and can be represented analytically through the transverse direction. The whole derivation is built upon the three dimensional key equations of elasticity for the piezoelectric materials and no assumptions on the plate kinematics have been taken. By virtue of the equilibrium equations, the constitutive relations and the introduced set of scaled boundary coordinates, three-dimensional governing partial differential equations are converted into the second order ordinary differential matrix equation. Furthermore, aided by the introduced internal nodal force, a first order ordinary differential equation is obtained with its general solution in the form of a matrix exponent. To further improve the accuracy of the matrix exponent in the SBFEM, the PIA is employed to make sure any desired accuracy of the mechanical and electric variables. By virtue of the kinetic energy technique, the global mass matrix of the composite plates constituted by piezoelectric laminae is constructed for the first time based on the SBFEM. Finally, comparisons with the exact solutions and available results are made to confirm the accuracy and effectiveness of the developed methodology. What's more, the effect of boundary conditions, thickness-to-length ratios and stacking sequences of laminae on the distributions of natural frequencies, mechanical and electric fields in laminated piezoelectric composite plates is evaluated.