• Title/Summary/Keyword: water parameter

Search Result 1,911, Processing Time 0.026 seconds

Sublayer assisted by hydrophilic and hydrophobic ZnO nanoparticles toward engineered osmosis process

  • Mansouri, Sina;Khalili, Soodabeh;Peyravi, Majid;Jahanshahi, Mohsen;Darabi, Rezvaneh Ramezani;Ardeshiri, Fatemeh;Rad, Ali Shokuhi
    • Korean Journal of Chemical Engineering
    • /
    • v.35 no.11
    • /
    • pp.2256-2268
    • /
    • 2018
  • Hydrophilic and hydrophobic polyethersulfone (PES)-zinc oxide (ZnO) sublayers were prepared by loading of ZnO nanoparticles into PES matrix. Both porosity and hydrophilicity of the hydrophilic sublayer were increased upon addition of hydrophilic ZnO, while these were decreased for the hydrophobic sublayer. In addition, the results demonstrated that the hydrophilic membrane exhibited smaller structural parameter (S value or S parameter or S), which is beneficial for improving pure water permeability and decreasing mass transfer resistance. In contrast, a higher S parameter was obtained for the hydrophobic membrane. With a 2 M NaCl as DS and DI water as FS, the pure water flux of hydrophilic TFN0.5 membrane was increased from $21.02L/m^2h$ to $30.06L/m^2h$ and decreased for hydrophobic TFN0.5 membrane to $14.98L/m^2h$, while the salt flux of hydrophilic membrane increased from $10.12g/m^2h$ to $17.31g/m^2h$ and decreased for hydrophobic TFN0.5 membrane to $3.12g/m^2h$. The increment in pure water permeability can be ascribed to reduction in S parameter, which resulted in reduced internal concentration polarization (ICP). The current study provides a feasible and low cost procedure to decrease the ICP in FO processes.

Estimation of CBOD Decay Rate for the Execution of Water Quality Model in the Nakdong-River Basin (낙동강에서 수질모델 실행을 위한 탈산소계수의 평가)

  • Yu, Jae-Jeong;Yoon, Young-Sam;Lee, Hae-Jin;Kim, Moon-Soo;Yang, Sang-yong;Lee, Young Joon
    • Journal of Korean Society on Water Environment
    • /
    • v.21 no.5
    • /
    • pp.511-515
    • /
    • 2005
  • CBOD(carbonaceous BOD) decay rate was investigated for the execution of water quality model in Nakdong-Rive basin. Estimation of laboratory-derived CBOD decay rate, $k_l$ and CBOD decay rate in natural waters, $k_d$ were carried out. Hydraulic factors were applied for the calculation of $k_d$. Values of biochemical oxygen demand were investigated in Weagwan, Koreong, Jeokpo, Namgi and Mulgeom sites for the four times. The ranges of $k_l$ value were $0.04{\pm}0.01{\sim}0.14{\pm}0.03$. The values of $k_l$ in upstream sites were much larger than those in the downstream sites. The values of $k_d$ were 0.025, 0.036, 0.005 and 0.001 at Weagwan, Jeokpo, Namgi and Mulgeom, respectively, indicating that values of $k_d$ were generally larger than those of $k_l$.

Calculation of the Peak-delay Force Reduction Parameter of Multi-Directional Random Waves Acting on a Long Caisson Breakwater (장대 케이슨 방파제에 작용하는 다방향 불규칙파랑의 파력감소계수 산정)

  • Jung, Jae-Sang;Kim, Bum-Hyung;Kim, Hyung-Jun;Cho, Yong-Sik
    • Journal of Korea Water Resources Association
    • /
    • v.43 no.10
    • /
    • pp.843-850
    • /
    • 2010
  • By employing multi-directional random waves, a parameter controlling the force acting on a long caisson breakwater is investigated in detail. Both JONSWAP (Joint North Sea Wave Project) and asymmetric directional spectra are adopted for frequency and directional spectra. It is found that the parameter decreases as the length of caisson and the angle of main direction of incident waves increase. Furthermore, the parameter is much similar to that of regular waves as the maximum spreading parameter $s_{max}$ increases. The parameter, however, decreases as asymmetry parameter ${\mu}$ increases when the main direction of incident waves is oblique to the breakwater.

Application of Optimum Multiparameter Analysis on Seawater Mixing in the South Sea of Korea Using Ra Isotopes

  • Lee Tongsup;Yang Han-Soeb;Kim Hyang-Bae
    • Fisheries and Aquatic Sciences
    • /
    • v.3 no.2
    • /
    • pp.143-150
    • /
    • 2000
  • Assuming that summer surface waters in the South Sea (northern East China Sea) are formed mostly by a mixing of three source water (Changjiang Discharge Water; Kuroshio Water and Yellow Sea Surface Water) we apply optimum multiparameter (OMP) analysis to calculate the mixing ratio of each source water to a given surface water. Since OMP requires more parameters than the number of water types (three in this study), we utilize two radium isotopes of dissolved $^{226}Ra\;and\;^{228}Ra$ along with temperature and salinity. Parameter values of each source water are deduced from in situ and historical data. Results with three source of waters on the surface waters are quite promising with less than $1\%$ of unanswered portions. Results not only reproduce the measured temperature and salinity faithfully but also discern the water masses of similar T and S according to their source water mixing. Extending OMP analysis to a whole water column obviously requires more parameters because more source waters are involved in the water mass formation. Original OMP routine utilized dissolved oxygen and nutrients. However, they seem to be perturbed too much by biological activities in the case of shallow waters. We discussed the use of other potential parameters. Also the benefit of parameter substitution is briefly introduced for the future OMP application on shallow waters.

  • PDF

Effects of drinking water containing trimethyl glycine or ascorbic acid on growth performance and blood parameter in ducks under scorching heat wave (폭염 하에서 음수 내 비타민 C와 트리메칠글리신 공급이 오리의 혈액 매개변수 및 생산성에 미치는 효과)

  • Kang, H.K.;Park, B.S.
    • Journal of the Korean Applied Science and Technology
    • /
    • v.33 no.3
    • /
    • pp.411-420
    • /
    • 2016
  • The objective of this study was to determine the effect of drinking water containing trimethyl glycine or ascorbic acid on growth performance and blood parameter profiles of duck exposed to scorching heat stress. A total of 480 ducks were randomly assigned to the following eight experiment groups for 42 days : control group C with general water, treatment group 1 (T1) with drinking water containing 100 ppm ascorbic acid, treatment group 2 (T2) with drinking water containing 200 ppm ascorbic acid, treatment group 3 (T3) with drinking water containing 300 ppm ascorbic acid, treatment group 4 (T4) with drinking water containing 400 ppm trimethyl glycine, treatment group 5 (T5) with drinking water containing 800 ppm trimethyl glycine, treatment group 6 (T6) with drinking water containing 1,200 ppm trimethyl glycine, treatment group 7 (T7) with electrolytes of KCl (0.5%) + $NaHCO_3$ (1.0%)+NaCl (0.5%). Our results revealed that the body weights and feed intakes of treatment groups, especially T3 and T6, were increased compared to the control group, where as the feed conversion ratios of treatment groups were decreased (p<0.05). Blood levels of total cholesterol, triglyceride, LDL-C, glucose, AST, ALT and pH in treatment groups were lower compared to those in the control group (p<0.05). Blood levels of red blood cell, platelets profiles, electrolyte and gas in treatment groups were higher compared to those of the control group (p<0.05).