• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.147-158
• /
• 2008

In this study, fermentation characteristics of waste agricultural and forest biomass for production of heat energy were focused to be used in agricultural farm households. The purpose of this study was focused on seeking practical utilization of agricultural and forest biomass wastes in agricultural farm households in the form of thermal energy by means of simple fermentation process. Fermentation process was performed in terms of different raw-materials and their mixture with different ratios. Urea, lime, and bioaids were added as fermenting aids. Moisture contents of fermenting substrates were adjusted to 55~65%. In order to optimize the fermentation process various factors, such as raw-materials, moisture contents, amount of fermenting aids, and practical measurement of hot-water temperature during fermentation were carefully investigated. The optimum condition of fermenting process were obtained from hardwood only and hardwood: softwood (50 : 50) beds. In case of hardwood only the highest temperature was recorded between 60 to $90^{\circ}C$ the lowest temperature was determined to more or less $40^{\circ}C$ and the average temperature was ranged to $50{\sim}60^{\circ}C$ and this temperature ranges were maintained up to 20~30 days. The optimum amount of additives were estimated to ca. 15 kg of urea, 20 kg of bioaids, and 10 kg of lime for 1 ton of substrate. To reach the highest temperature the optimum moisture content of fermenting substrate was proved to 55% among three moisture content treatments of 45%, 55% and 65%. The temperature of hot-water tank installed in fermenting bed of hardwood : grass (50 : 50) showed very different patterns according to measuring positions. In general, temperatures in the mid- and upper-parts of substrate piling were relative higher than lower and surface parts during 45-day fermentation process. The maximum temperature of fermenting stage was determined to $65^{\circ}C$, minimum temperature, more or less $40^{\circ}C$, and average temperature was $60^{\circ}C$. The water temperature of tank exit was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. It could be concluded that fermentation process of waste agricultural and forest biomass produces a considerable amounts of heat, averaging about $50{\sim}60^{\circ}C$ for maximum 3 months by using the heat exchanger (HX-helical type).

• Clean Technology
• /
• v.19 no.3
• /
• pp.219-225
• /
• 2013

Environment-friendly and surfactant-free aqueous cleaning agents have been developed in order to solve various problems generated by surfactants in the aqueous cleaning agents. Aqueous surfactant-free cleaning agents, S-1 and S-2 have been formulated with water-soluble solvents such as propylene glycol and propylene glycol ether on their main components and with some additives. These solvents were chosen because of their good solubility in water and excellent solubility of fluxes which are major contaminants of printed circuit board in the electronic industry. Physical properties of the formulated and the imported cleaning agents were measured to predict their cleaning performance, and their cleaning abilities of flux and solder contaminants were evaluated under the various ultrasonic frequencies by a gravimetric method. The measurement results show that the physical properties of cleaning agent V are generally similar with those of formulated cleaning agents S-1 and S-2. Both the cleaning agent V and the formulated cleaning agents S-1 and S-2 showed similar trends that their pH decrease in the beginning and then increases later on with the increase of their dilution in water. It is considered that the wetting indices of the cleaning agents calculated with experimental values do not not have any influence on their cleaning ability. In ultrasonic cleaning tests under three ultrasonic frequencies of 28, 45, and 100 kHz, their best performances of cleaning solder and flux were obtained at 45 kHz and 28 kHz, respectively, and the cleaning performance of the formulated cleaning agents S-1 and S-2 was better than that of the cleaning agent V. However, in the case of the recommended diluted concentration of 25 wt% cleaning solution, the cleaning performance of the cleaner V for solder and flux was better in the initial stage of cleaning compared to the formulated cleaners. And it may be concluded that the formulated cleaning agents S-1 and S-2 can be applied to cleaning of solder and flux in the industry, based on the experimental results in this study.

• Journal of Mushroom
• /
• v.18 no.1
• /
• pp.20-28
• /
• 2020

This study was conducted to determine the antioxidant, nitrite scavenging, melanin tyrosinase inhibitory, and melanogenesis inhibitory activities of fermented Coix lacryma-jobi L. var. mayuen Stapf. by Hericium erinaceum (Bull.: Fr.) mycelial hot water extract (FCLHE). Additionally, we analyzed β-glucan and ergosterol contents in FCLHE and C. lacryma-jobi hot water extract (CLHE). The ergosterol and β-glucan contents in FCLHE were 740.2 mg% and 245.3 mg%, respectively, whereas these components were not detected in CLHE. FCLHE showed higher cell viability than CLHE. When B16F10 cells were treated with 500 ㎍/mL each of CLHE and FCLHE, the FCLHE treated cells produced 8.9 uM nitric oxide (NO), which was lower than that produced by CLHE treated cells (10.6 uM). The FCLHE treated cells showed significantly greater tyrosinase inhibition and melanin production at all tested concentrations than when compared to the CLHE treated group. Antioxidant parameters such as DPPH and ABTS radical scavenging activities were higher in FCLHE than in CLHE. These results suggest that FCLHE can be used as a raw material for functional foods, for food additives, and in the cosmetic industry.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1735-1752
• /
• 2021

In this study, the Bodhi tree powder is used as an additive to Seolgi rice cake and the research is made how useful the additives are to the Seolgi rice cake. This research would be a good way to develop and distribute the Seolgi rice cake which is added with the powder of Bodhi tree. The results of the study are as follows. 1. The water contents of Bodhi tree was 81.64% with 1.75% of crude protein, 0.81% of crude fat, and 0.56% of crude ash. It was found out that the Bodhi tree has higher contents of polypherol and has the efficacy of anti-oxidation property and has the value as the food stuff. 2. When the Seolgi rice cake is made with the addition of Bodhi tree powder, the value of a and b, sugar, hardness, elasticity, texture and viscosity have risen while the contents of water, L value, pH, stickiness and cohesiveness were lowered. The property test showed that the addition of Bodhi tree to Seolgi rick cake would make all testing items "strong" and the addition of 4% of Bodhi tree in the manufacturing of Seolgi rice cake was most preferred. 3. As for the storage of Seolgi rice cake is concerned, as the period of storage goes by, the value a and b, hardness, elasticity and texture and viscosity have increased while the water contents, L value, stickiness and cohesiveness have reduced. As the period of storage gets longer, the total cell number has increased. But as the more volume of Bodhi tree is added to the rice cake, the total cell number has reduced, thus lengthening the storage period. The rest shows that in producing the Seolgi rice cake, the 4% of addition of Bodhi rice cake is deemed to be the best. It was confirmed that the proper volume of Bodhi powder is proper for the Seolgi rice cake and is also good for decorative and quality characteristics for the rice cake.

• Journal of the Korean Wood Science and Technology
• /
• v.7 no.2
• /
• pp.3-30
• /
• 1979

Larch ($\underline{Larix}$ $\underline{leptolepis}$ GORDON), one of the major afforestation species in Korea in view of its growing stock and rate of growth, is not favored as a raw material for pulp due to its low yield of pulp and difficulties with bleaching arising from the high content of extractives in wood, and the high heartwood ratio and the active phenolics, respectively. The purpose of this study is to investigate the characteristics of firstly pulping with various additives of cellulose protector for the yield of pulp, and secondly bleaching with oxygen for chlotination-alkali extraction of five stage-sequence to reduce chlorine compounds in bleaching effluents. The kraft cooking liquor for five age groups of larchwood was 18 percent active alkali with 25 percent sulfidity and 5 : 1 liquor-to-wood ratio, and each soda liquor for sap-and heart-wood of the 15-year-old larchwood was 18 percent alkali having one of the following cellulose protectors as the additive; magnesium sulfate ($MgSO_4$, 2.5%), zinc sulfate ($ZnSO_4$, 2.5%), aluminium sulfate ($Al_2(SO_4)_3$, 2.5%), potasium iodide (KI, 2.5%), hydroquinone (HQ, 2.5%), anthraquinone (AQ, 0.1%) and ethylene diamine (EDA, 2.5%). Then each anthraquinone-soda liquor for the determination of suitable cooking condition was the active alkali level of 15, 17 and 19 percent with 1.0, 0.5 and 0.1 percent anthraquinone, respectively. The cooking procedure for the pulps was scheduled to heat to 170$^{\circ}C$ in 90 minutes and to cook 90 minutes at the maximum temperature. The anthraquinone-soda pulps from both heartwood and sapwood of 15-year-old larchwood prepared with 0.5 percent anthraquinone and 18 percent active alkali were bleached in a four-stage sequency of OCED. (O: oxygen bleaching, D: chlorine dioxide bleaching and E: alkali extraction). In the first stage oxygen in atmospheric pressure was applied to a 30 percent consistency of pulp with 0.1 percent magnesium oxide (MgO) and 3, 6, and 9 percent sodium hydroxide on oven dry base, and the bleached results were compared pulps bleached under the conventional CEDED (C: chlorination). The results in the study were summarized as follows: 1. The screened yield of larch kraft pulp did not differ from particular ages to age group, but heartwood ratio, basic density, fiber length and water-extractives contents of wood and the tear factor of the pulp increased with increasing the tree age. The total yield of the pulp decreased. 2. The yield of soda pulp with various chemicals for cellulose protection of the 15-year-old larchwood increased slightly more than that of pure soda pulp and was slightly lower than that of kraft pulp. The influence of cellulose protectors was similar to the yield of pulps from both sapwood and heartwood. The effective protectors among seven additives were KI, $MgSO_4$ and AQ, for which the yields of screened pulp was as high as that of kraft pulp. Considering the additive level of protector, the AQ was the most effective in improving the yield and the quality of pulp. 3. When the amount of AQ increased in soda cooking, the yield and the quality of the pulp increased but rejects in total yield increased with decreasing the amount of active alkali from 19 to 15 percent. The best proportion of the AQ seemed to be 0.5 percent at 17 percent active alkali in anthraquinone-soda pulping. 4. On the bleaching of the AQ-soda pulp at 30 percent consistency with oxygen of atomospheric pressure in the first stage of the ODED sequence, the more caustic soda added, the brighter bleached pulp was obtained, but more lignin-selective bleaching reagent in proportion to the oxygen was necessary to maintain the increased yield with the addition of anthraquinone. 5. In conclusion, the suitable pulping condition for larchwood to improve the yield and quality of the chemical pulp to the level for kraft pulp from conventional process seemed to be. A) the selection of young larchwood to prevent decreasing in yield and quality due to the accumulation extractives in old wood, B) the application of 0.5 percent anthraquinone to the conventional soda cooking of 18 percent active alkali, and followed, C) the bleaching of oxygen in atmospheric pressure on high consistency (30%) with 0.1 percent magnesium oxide in the first stage of the ODED sequence to reduce the content of chlorine compounds in effluent.

• Korean Journal of Poultry Science
• /
• v.38 no.4
• /
• pp.265-273
• /
• 2011

This study was carried out to determine the effect of dietary supplementation of quercetin and methoxylated quercetin extracted from onions on chicken thigh meat quality during cold storage. For 35 days, 1-day-old 320 broiler chicks (Ross) were divided into 8 groups and supplemented the diet; basal diet only (CONTROL), CONTROL with antibiotics (AB), vitamin E 20 IU (VE20), vitamin E 200 IU (VE200), quercetin 20 ppm (QC20), quercetin 200 ppm (QC200), methoxylated quercetin 20 ppm (MQ20), and methoxylated quercetin 200 ppm (MQ200). After slaughtering the broilers, thighs were separated and analyzed the quality change of the meat during storage at $4^{\circ}C$ for 7 days. The meat quality factors such as pH, color, water holding capacity, and sensory characteristics of thigh meat were determined on the experiment day 0, 3, and 7. After slaughtering, the pH of AB, VE 20, QC 20, and MQ 200 showed no significant difference compare to that of CONTROL. However, VE 200 and QC 20 showed higher pH value than CONTROL on storage day 3. $L^*$ value of chicken thigh of MQ 20 was lower than CONTROL on storage day 0, however, no significant difference was found between CONTROL and treatments on storage day 3. Redness ($a^*$) of chicken thigh in CONTROL was increased during storage. QC 20, QC 200, and MQ 200 significantly reduced the $b^*$ value of chicken thigh (p<0.05). Water holding capacity of VE 20 and MQ 200 was significantly higher than the CONTROL on the day 0. Also, QC 200 showed higher WHC compare to the CONTROL. In sensory evaluation, overall acceptability of chicken thigh in quercetin and methoxylated quercetin group showed no significant differences compare to that of CONTROL by storage day 3. These results suggested that the quercetin and methoxylated quercetin could be used as additives to enhance broiler thigh meat quality such as pH and WHC without adverse effect on color and sensory characteristics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1767-1775
• /
• 2013

The purpose of this study is to investigate the total polyphenol and antioxidant activities of radish buds (Raphanus sativus L.) based on sprouting periods and extraction solvents in order to present basic data that are needed for using the radish buds as functional food material. The antioxidant activities were assessed by using various antioxidant models (DPPH, TBARS, Rancimat method, POV). The total polyphenol contents according to the extraction solvents were 84.11 and 296.51 mg/g, and the ethanol extract on day 4 of showed the highest value as 296.51 mg/g. As for DPPH radical-scavenging activity, on the day 4 of sprouting, water extracts indicated the highest scavenging activity by 86.67%, and the acetone extracts indicated a rather low scavenging activity as 77.23%. As for TBARS measurement of the radish bud extracts on day 4 of sprouting the extract of 70% ethanol was highest (71.48%). On day 8 of sprouting the TBARS value was increased and the methanol extract was highest (78.99%). As for the oxidative induction period on day 4 of sprouting in Rancimat measurement, the methanol extract was highest (6.07 hours) on day 4 and the antioxidant index was 1.16. On day 12 of sprouting, the general oxidative induction period tended to be reduced to 5.25 to 5.91 hours. In the peroxide value measurement on day 4 of sprouting and beginning of the storage, the extracts showed no difference between 3.02 meq/kg oil and 4.12 meq/kg oil, and on the day 60 of storage, the water extract (43.83 meq/kg oil) and the methanol extract (45.42 meq/kg oil) were lowest with higher antioxidant effect. In conclusion, the radish bud extract with higher total polyphenol contents and antioxidant activities may serve as functional material for food additives, such as natural antioxidants and food preserving agents.

• Korean Journal of Poultry Science
• /
• v.30 no.4
• /
• pp.259-267
• /
• 2003

Two experiments were conducted to investigate the effect of betaine on egg production, lipid metabolism, and osmoregulation in 18-to 42-week-old ISA Brown laying hens. In experiment 1, three hundred and sixty one hens were fed a com-soy basal diet contailing 16% crude protein (CP), 2800 kcal/kg metabolizable energy (ME), 0.33% methionine, and 0, 300, 600, or 1200 mg betaine per kg diet. Egg production, egg weight, feed consumption, feed conversion, and egg quality were measured every eight weeks. Betaine concentration in live and egg were determined along with serum cholesterol, abdominal fat, total serum protein and albumin levels. In experiment 2, twenty thirty-three-week-old laying hens were fed the same diets as those used in experiment 1 in individual cages and the amount of feed and water consumption were measured for two weeks. At the end of experiment 2, all birds were killed to determine blood plasma and ileal osmopressure, arginine vasotocin (AVT), and liver moisture content. In experiment 1, egg production between the treatments during the first eight weeks were not different, whereas the significant increment of egg production were noticed in the birds fed more than 600 ppm betaine after reaching the peak egg production stage (p<0.05). The egg weight was reduced significantly by the betaine supplementation for the first 8 weeks (p<0.05). Feed conversion tended to improve by betaine supplement. Egg quality was not enhanced by betaine supplementation. Liver betaine level increased with betaine feeding compared to the control but betaine concentration in eggs decreased with betaine supplementation. Betaine supplementation elevated the level of serum total cholesterol and triglyeerides compared to the control. Abdominal fat content was increased by betaine supplementation, whereas liver fat content decreased. In experiment 2, water consumption significantly increased in hens fed diets containing 300 and 600 mg betaine/kg (p<0.05) and osmotic pressure of ileal digesta increased with betaine supplement. Liver moisture content was not affected by betaine, but AVT increased in hens fed betaine. The overal results suggested the possibility of using betaine as a feed additives in the laying hens beacuse of its positive contribution to improving egg production and other metabolic parameters related to lipid metabolism.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.217-222
• /
• 2008

The aim of the present study was to evaluate the effect of marination with mixed salt (NaCl, $CaCl_2$, and phosphate) and kiwi juice and of different cooking methods for pork loin-based products in order to establish the basic database for increasing the consumption of pork loin in Korea. Diced chilled pork loin ($2{\times}2{\times}2\;cm$) was marinated in 4 different treatments: no additives (T1), salt mix only (T2), kiwi juice only (T3), and salt mix+kiwi juice (T4). The mixed salt was prepared by the addition of NaCl, $CaCl_2$, and phosphate dissolved in water (10% of pork loin weight) at concentrations of 0.5, 0.5, and 0.3% per pork loin weight, respectively. The amount of kiwi juice was 10% of pork loin weight. After marination for 24 hrs at $4^{\circ}C$, the samples were cooked with different methods including roasting with Kimchi, pan broiling, and simmering. After simmering, pH of pork loin of T1 and T2 was higher than that of T3 and T4 (p<0.05), while that of roasted with Kimchi and pan broiled did not show any difference. Water holding capacity of T4 after pan broiling was higher than that of T1, T2, and T3 (p<0.001) and shear force of T4 was lower than other treatments. Also flavor and acceptability of T4 after pan broiling were scored higher by 11 sensory panelists (p<0.05). From this result, the pork loin-based products marinated with mixed salt and kiwi juice with pan broiling would be preferred by consumers as one of the methods to promote the consumption of pork loin in Korea.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.62-72
• /
• 1998

This study was performed to characterize the trace organic pollutants in the industrial wastewater and to establish the database of the trace organic pollutants. The four manufacturing industries, which are refined petroleum, industrial chemicals, rubber & plastics and fabricated metals, were surveyed. The wastewater and discharging water of these 30 factories are analyzed to characterize the trace organic pollutants. In industrial chemicals, the kinds of products and organic pollutants are very various. Therefore to select the characteristic organic pollutants in this categories are also very difficult. In industrial chemicals, the gas chromatograpic peak patterns of wastewater are represented the various type according to their products, therefore the typical patterns of the characteristic organic pollutants could not be obtained because the kinds of manufactured goods and organic pollutants are very various. In refined petroleum, the effluent is discharged in the distillatory process of atmosphere pressure and contained the saturated hydrocarbons, phenol compounds, benzene compounds and naphtalene compounds. The saturated hydrocarbons peaks from $C_{15}$ to $C_{35}$ are represented the typical oil patterns by the uniform intervals therefore the peak can be easily distinguished. In rubber & plastics, the wastewater is discharged in the washing process which contains the additives. The problem of wastewater is not serious because the manufacturing process is not produced the effluent or the produced cooling water is recycled in that process.