• 제목/요약/키워드: water absorption test

검색결과 471건 처리시간 0.03초

목질 보드류의 표면 열변화에 따른 접촉각(방습) 특성 (Moistureproof Characteristics of Woodboard Types with Surface Thermal Changes)

  • 신상호;임남기
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 가을 학술논문 발표대회
    • /
    • pp.161-162
    • /
    • 2020
  • In this study, as part of securing related data, water droplets were dropped on the upper part of the wooden board for flooring in an environment such as floor heating, and the degree of absorption according to the surface temperature change was tested. The test results showed that the contact angle of the surface was low (25℃→40℃) or the droplet was absorbed into the small plate and disappeared. The contact angle of the OSB and MDF was decreased within 30 minutes, but the surface water droplet was maintained longer than the plywood. This is because the surface is coated with hydrophobicity unlike the plywood, but moisture absorption in the cross section after the second processing will not be prevented and it will lead to defect occurrence problem.

  • PDF

바이오매스 플라이애시를 활용한 무시멘트 경화체의 특성 (Properties of Non-cement Matrix Using Biomass Fly Ash)

  • 김대연;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 봄 학술논문 발표대회
    • /
    • pp.185-186
    • /
    • 2020
  • This study In order to reduce the amount of cement that generates a large amount of carbon dioxide and attempts to find a recycling method to solve environmental problems by using biomass fly ash. Experiments were conducted according to replacement ratio of biomass fly ash based on GGBFS, The test items are flowability, air content, unit volume weight, water absorption, flexural strength and compressive strength. As a result of the experiment, as increased replacement ratio of biomass fly ash, the flowability and air content was increased. As increased replacement ratio, the density was decreased and water absorption was increased. The compressive strength tended to decrease as increased replacement ratio. The flexural strength tended to increased as increased replacement ratio.

  • PDF

치과용 심미수복재료 세로모에서 수분흡수와 체적 변화에 관한 연구 (Dimensional Changes of Ceromer Crown by Water Absorption)

  • 이종혁
    • 대한치과보철학회지
    • /
    • 제47권2호
    • /
    • pp.119-124
    • /
    • 2009
  • 연구목적: 치과 영역에서 환자들의 심미적인 요구가 증가하면서 자연 치아의 색조를 재현할 수 있는 수복물의 개발이 이루어졌으며, 이러한 연구의 일환으로 도재와 복합레진의 특성을 겸비한 Ceromer(Ceramic Optimized Polymer)가 개발되었다. Ceromer는 기존의 복합레진에 무기질을 고밀도로 충전하여 물리적 성질을 향상시켰다. 연구 재료 및 방법:본 실험에서는 두 종류의 Ceromer[$Targis^{(R)}$(Ivoclar-vivadent AG., Schaan, Liechtenstein), $BelleGlass^{(R)}$(Kerr Co., Orange, CA, USA)]를 이용해 레진 전장관 형태의 시편을 제작하고 증류수에 침전한 후 발생하는 체적과 중량의 변화를 관찰하였다. 결과 및 결론:두 종류의 Ceromer 모두 수중 침적 시간이 증가할수록 높이와 폭이 증가되었으며, $Targis^{(R)}$보다 $BelleGlass^{(R)}$에서 더 큰 누적변화율을 보였다. 72시간까지 급격한 증가를 보이다 이후 누적변화율의 증가는 감소하였다. 통계적 분석결과 $Targis^{(R)}$의 높이와 무게의 누적 변화량이 24시간군과 나머지군 사이에 유의한 차이를 보였으며, $BelleGlass^{(R)}$에서는 폭과 무게에서 누적 변화량이 24시간군과 나머지군 사이에 유의한 차이를 보였다(<.05). $Targis^{(R)}$$BelleGlass^{(R)}$ 두 군간의 비교에서는 높이, 폭, 무게의 변화량은 통계적으로 유의한 차이를 보이지 않았으나 변화양상은 다르게 관찰되었다.

Filament Winding에 의한 Composite Hollow Bushing용 GRP tube의 특성 (Characteristics of GRP tube using Composite Hollow Bushing by Filament Winding)

  • 조한구;강형경;유대훈
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.378-379
    • /
    • 2008
  • Recently, composite hollow bushings have been increasingly employed mainly from the various characteristics. Composite bushings are superior to porcelain bushings in several respects, including lighter weight, better anti-pollution and anti-explosion properties, and easer manufacturing. Filament wound GRP tubes which have various winding angle were manufactured by using a filament winding machine. This paper will show some design issues and winding condition for composite bushing. And, results show that the winding condition of composite GRP tubes can be used to improved their bending strength and pressure, For bending and pressure tested, tubes with the hybrid winding pattern show higher strength than those of unit winding pattern. Also, the influence of absorption was evaluated through such as measurement of the dye penetration test and water diffusion test, also aspects of surface state using scanning electron microscopy.

  • PDF

Hybrid 열가소성 복합재료의 재료거동에 관한 연구 (The Study on the Material Behavior of Hybrid Composites)

  • 조현철;이중희
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2000년도 추계학술발표대회 논문집
    • /
    • pp.67-70
    • /
    • 2000
  • This study was performed to investigate the material behavior of hybrid thermoplastic composites contained glass fiber and calcium carbonate. The composite was prepared with each combination ratio of calcium carbonate, and the content of glass fiber was fixed with 10% by weight. In order to investigate the material behavior for various combination ratio, tension test, flexural test, and impact test were performed. Microscopic observation were conducted to examine the fractured surface of specimen for tension test. And the material behavior of the hybrid thermoplastic composite immersed in salt water with definite time was investigated.

  • PDF

Power Absorption Measurements during NMR Experiments

  • Felix-Gonzalez, N.;Urbano-Bojorge, A.L.;de Pablo, C. Sanchez-L;Ferro-Llanos, V.;del Pozo-Guerrero, F.;Serrano-Olmedo, J.J.
    • Journal of Magnetics
    • /
    • 제19권2호
    • /
    • pp.155-160
    • /
    • 2014
  • The heating produced by the absorption of radiofrequency (RF) has been considered a secondary undesirable effect during MRI procedures. In this work, we have measured the power absorbed by distilled water, glycerol and egg-albumin during NMR and non-NMR experiments. The samples are dielectric and examples of different biological materials. The samples were irradiated using the same RF pulse sequence, whilst the magnetic field strength was the variable to be changed in the experiments. The measurements show a smooth increase of the thermal power as the magnetic field grows due to the magnetoresistive effect in the copper antenna, a coil around the probe, which is directly heating the sample. However, in the cases when the magnetic field was the adequate for the NMR to take place, some anomalies in the expected thermal powers were observed: the thermal power was higher in the cases of water and glycerol, and lower in the case of albumin. An ANOVA test demonstrated that the observed differences between the measured power and the expected power are significant.

가스흡수식 냉온수기 열교환기용 세관의 부식특성에 관한 연구 (The Study on Corrosion Characteristics of Heat Exchanger Tube for Gas Absorption Refrigeration & Hot Water System)

  • 정기철
    • 한국가스학회지
    • /
    • 제6권1호
    • /
    • pp.92-97
    • /
    • 2002
  • 가스흡수식 냉온수기의 작동매체로 사용되고 있는 LiBr 수용액 중에서 열교환기 세관용 재료인 동 세관 및 동합금재인 큐프로니켈 세관의 부식특성에 관한 연두를 하기 위하여 $62\%$ LiBr 수용액 중에서 각 재료에 대한 전기화학적 분극실험을 실시하여 부식특성을 고찰한 결과 다음과 같은 결론을 얻었다 1) 열교환기 세관재의 분극저항은 $30\%$ 큐프로니켈 세관 > $10\%$ 큐프로니켈 세관 > 동 세관의 순으로 높게 나타난다 2) 큐프로니켈 세관의 개로전위는 동 세관보다 귀전위화되면서 부식전류밑도는 더 억제된다 3) $30\%$ 큐프로니켈 세관의 부동태 영역은 $10\%$ 큐프로니켈 세관보다 전위구간이 더 크게. 나타나면서 부동태유지 전류밀도는 더 낮아진다.

  • PDF

무기안료가 시멘트모르타르의 압축강도와 흡수율에 미치는 영향 (The Influence of Inorganic Pigments on the Compressive Strength and Absorption of Cement Mortars)

  • 송혁;이재용;고성석
    • 한국안전학회지
    • /
    • 제19권2호
    • /
    • pp.104-111
    • /
    • 2004
  • The aim of this study was to investigate the influence of inorganic pigments on the physical properties of cement mortar. For this purpose, the compressive strength and absorption test were carried out on cement mortar imxed with inorganic pigments by changing the proportion of cement mortar, water-cement ratio, and ratio of pigment. The result of this study can be summarized as follows: the compressive strength of colored mortar rapidely increased in red and yellow mortar, as the mix ratio of pigment increased. In case of green and black mortar, however, the compressive strength decresed as the mix ratio incresed. In case of red and yellow mortar, the absorption of colored mortar increased as the mixing ratio increased, if the mean particle diameter of the pigment is small. In case of green and black mortar, the absorption ratio decreased as the mix ratio increased. After investigating the overall physical properties of colored mortar, it was confirmed that the proper mix ratio of pigment securing the properties of colored mortar was below 6% of the weight of the cement to be used.

방사선으로 처리된 항생물질의 수서 생태위해성 평가 (A study on the aquatic eco-risk assessment of antibiotics treated by radiation)

  • 강선홍;장재구;가순규;김현영;김상돈;이면주
    • 상하수도학회지
    • /
    • 제26권3호
    • /
    • pp.373-381
    • /
    • 2012
  • Antibiotics have been issued recently in water environments because of potential impacts on ecosystem and public health. This study was aimed to investigating the degradation of antibiotics such as tetracycline, lincomycin, sulfamethazine and cephradine using gamma ray irradiation. And the toxicity before and after irradiation on antibiotics was tested in order to examine the aquatic eco-risk assessment by aquatic organisms. In addition, comparing tests on toxicity for gamma ray and UV irradiated antibiotics was conducted. Four different antibiotics were prepared by concentration of 30 mg/L with demi-water respectively. The absorption dose of gamma ray was ranged from 0.2 to 2 kGy. The concentration of four antibiotics was gradually decreased corresponding to the increase of the absorption dose. A method for toxicity assessment using Pseudokirchneriella subcapitata was evaluated to the most acceptable compared with methods by Daphnia magna and Microtox$^{(R)}$ in terms of sensibility. It showed that the reduction of toxicity on antibiotics treated by gamma ray was superior comparing to the test results obtained from UV treatment. By-products from antibiotics treated by gamma ray were easily decomposed by microorganism and their toxicity was also evaluated to low.

무기물 금속염계 발수분체를 혼입한 시멘트 모르타르의 물리적 특성 및 수분흡수저항성에 대한 실험적 연구 (Experimental Study on Physical Properties and Water Absorption Resistance Evaluation of Cement Mortar Incorporating Inorganic Metal Salt-based Water Repellent Powder)

  • 이원근;윤창복
    • 한국건설순환자원학회논문집
    • /
    • 제9권4호
    • /
    • pp.609-616
    • /
    • 2021
  • 본 연구에서는 금속염계 무기물인 발수분말과 포졸란계 재료인 천연제올라이트 분말을 사용하여 시멘트 모르타르에 혼입하고 물리적 특성 및 수분에 대한 저항성을 확인하였다. 무기물 금속염계 발수분말을 단독으로 혼입한 시험체에 비해서 천연제올라이트를 동시에 사용한 시험체에서 수분침투실험 및 그에 수반하는 염화물 침투시험에서 높은 저항성을 갖는 것을 확인 할 수 있었다. 금속염계 발수분말을 사용하는 경우 불용성으로 인하여 수분침투저항성이 내부에서 고르게 분산되지 못하고 표면에 국한되었으며 천연제올라이트와 동시에 사용하는 경우 포졸란 반응으로 인해 수화초기의 응결시간이 빠르고 또한 천연제올라이트의 다공성 내부에 발수분말이 부착되어 내부에서도 수분저항성이 일부 생성된 것으로 판단된다.