• Journal of Fashion Business
• /
• v.13 no.2
• /
• pp.78-86
• /
• 2009

When scouring and contraction finishing at $90^{\circ}C$ using Relaxer or Rotary Washer contraction and weight loss ratio in warp and weft directions were excellent. Also surface state of fabric after drying or sanding treatment was excellent without crease. Low melting polyester fabric showed a complete melting bond by heat setting(P/S) at above $160^{\circ}C$. The alkali hydrolysis reaction of polyester showed the breakpoint in the weight loss behavior test, polyester yarn showed a breakpoint ranging from 25% to 28%. This is due to the difference of the hydrolysis rate between regular polyester and soluble polyester. Initially the soluble polyester was eluted and micro-fibrillized 5 times faster than a regular polyester. At a later time, a regular polyester was reduced weight to impart a proper flexibility and drape property to the fabric. As a result of surface sanding finishing, the surface of interior fabric showed a surface state most stabilized when using Mesh No. 220 in mono 0.2d after elution finishing. When the rotation direction of sanding roller was pro-, pro-, pro-, and retro-direction, a directional effect of tuft was not shown, a writing effect as suede was exhibited and a surface state was even. Sublimation fastness was 3-4 class for polyester and 2-4 class for nylon. Light fastness 3-4 class after lapse of 100 hours and 2-4 class after lapse of 160 hours. Abrasion fastness was 3-4 class on wet and 4-5 class on dry Laundry fastness was 2-4 class. As such, the abrasion fastness is slightly reduced upon wetting and the use thereof for interior is excellent, whereas laundry fastness is slightly lowered.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.5 s.153
• /
• pp.753-761
• /
• 2006

This paper suggests the optimal conditions for the laundry to prevent from the electrostatic charge by the evaluation of the electrostatic characteristics in the full process of washing and drying. Cotton, nylon, and polyester fabrics were used as test washing specimens. Detergent and softener were used under the standard washing cycle, and then the electrostatic characteristics of laundry were measured. The results showed that the moisture regain decreased and the electrostatic charge increased with the drying time. It was observed that the specimen fabrics were already dried up before the standard drying cycle was finished. Consequently, the excessive drying caused a generation of electrostatic charge due to the removal of the trace of moisture remaining and the excessive friction. Especially, the softener played an important role to prevent from a generation of electrostatic charge, whose insertion was more effective in the drying than in the rinsing process. It was also shown that the electrostatic charge could be decreased by drying the fabrics of one kind. On the other hand, for drying the mixed kinds of fabrics, the electrostatic charge increased remarkably. Therefore we suggest that the laundry be classified according to the kinds of fiber, and then be washed and dried before excessive drying to reduce electrostatic charge And further, a proper use of softener is effective to reduce electrostatic charge.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1779-1784
• /
• 2010

Net washing in a fishery involves considerable labor and is a time-consuming process; it also causes severe environmental pollution. In this study, we developed a net hauler for washing fishing nets. This hauler can be used to simultaneously haul and wash the net. We devised the revolver structure of the net hauler in order to resolve the net slip problem. The net hauler can be used by itself for washing small-sized nets, or it can be used in an auxiliary washing step in case of a large-sized net. Further, the component installed in the net hauler for unraveling the net improves the net washing performance of an automatic net washer. During the experiments conducted using the prototypes of the new net hauler, the net did not slip and the desired washing performance could be achieved.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.2
• /
• pp.55-63
• /
• 2013

For a large-scale semiconductor manufacturing clean room, the energy consumed in an outdoor air conditioning system to heat, humidify, cool and dehumidify incoming outdoor air is very large. In particular, the energy requirement to humidify outdoor air in the winter season is generally known to be high. Recently, in order to overcome the high energy consumption nature of a steam generator in a conventional steam humidification type outdoor air conditioning system, an air washer is often introduced instead of the steam generator in the outdoor air conditioning system, which can be called a water spray humidification type outdoor air conditioning system. Therefore, the assessment and comparison of the annual energy consumed in the steam humidification type and the water spray humidification type outdoor air conditioning systems deserves to be examined in order to reduce the outdoor air conditioning load of a clean room. In the present study, a numerical analysis was conducted to obtain the annual electric power consumption of the two outdoor air conditioning systems. It was shown from the comparison of the numerical results that the water spray humidification type outdoor air conditioning system can reduce about 30% of annual electric power consumption of the steam humidification type outdoor air conditioning system.

• Journal of the Korean Home Economics Association
• /
• v.34 no.5
• /
• pp.283-292
• /
• 1996

This study examines the character of "Tencel" named as Ecology Fiber and investigates the fitness of it as the textile and the satisfaction in dress when its fastness is compared with that of Rayon classified into Celulose textile. Dye experiment selected 100% Tencel, Rayon for the samples, which were dyed into the direct dye and Turky Blue and Blue of the rective dye and were washed twelve times by the automatic washer. After that, the dye experiment examines the light, laundering, perspiration, rubbing and the composite fastness of the perspiration and hight in the lists of the dye fastness. The results are as follows: 1. The experiment of the color fastness, especially in T-blue of the direct dyestuff, requiring the twelve times-repeatedly-washing by the detergent says that the color fastness of Tencel is superior to that of the cellulose textile ; Rayon. 2. The experiment of the light fastness says that the fastness of Tencel is superior to that of Rayon. 3. The experiment of the laundering fastness says that all of Tencel, Rayon shows the excellent result in the direct dye than in the reactive dye. 4. The experiment of the rubbing fastness says that although Tencel, Rayon show the remarkable result in the desiccant experiment than in the humid one, the rubbing fastness of Tencel is superior to that of others. 5. The experiment of perspiration fastness says that Tencel, Rayon have the closely tightened tendency not to be altered through the acid and alkali perspirations. 6. The experiment of the composite fastness of perspiration and light indicates that the artifical perspirations, though the light lets the fastness of textiles weeken, do very slightly make them loosen, which does not offer the outstanding result. This whole result show that the fastness of Tencel is superior to that of Rayon. The Korean Fiber Enterprise in clothing should make the new and ecological fiber "Tencel" by means of the large amount of investment, and the technique of handing and controlling about it, considering that the dangerous needle of environmental pollution has been slackening the close-related ecological knots of the global environment. global environment.

• Journal of the Korea Furniture Society
• /
• v.23 no.4
• /
• pp.449-459
• /
• 2012

The article aims to making a comparison between traditional Korean and Western furniture metal handles to give the detail information of the handle terms by analyzing the related literature including internet and interviews. In terms of that, the Korean and Western metal handles are compared in the types, components, materials, methods, and terms affecting the development made by the craftsmen before the Industrial Revolution about the mid or late 18th century. As a result, first, ring and drop pull handles were mostly and wooden knobs were a little used to open the furniture doors and drawers. The Korean drop pulls, Deulswae, came out after the ring pulls, Gori, while the Western drops called loop or bail handles as well, came out before the ring pulls. Second, the components were composed by ring, Gori, loop or bail, Deulswae, Post, Baemok, washer, Baemokbatchim, and backplate, Deulswaebatchim. Most of the Western handles were fastened by the bolt and nut, while the post of two strips, Baemok, fastened the Korean metal handles. Third, the metal handles were created of brass and iron mostly, gilded gold and silver. Forth, the method were largely used by casting, engraving, forging, plating, and hammering in the Korean handles, and by casting, molding, engraving, and stamped in the Western handles. Finally, the terms such as "knobs, pulls, drops, ring and drop pulls, loop or bail handles, posts, washers, backplate, casting, molding, engraving, forging, plating, and stamped" were clarified by the two comparison in Korean and English.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.917-920
• /
• 2014

In Korea mobile phone subscribers exceeded 1 million people in 1995, and ten million people in 1998. Prevalence of the mobile phone increased dramatically over 110% compared to the population. And all family members including children and students use one or two mobile terminal. Mobile phone is obviously necessary good more than washer, vacuum cleaner, passenger car. Our daily life with mobile communication are conveniently positioned, but communication related costs including the price of the device has become a big burden on the household. But the government does not seem to do the right role at the right time to prevent the failure of the market to further maximize consumer welfare and social welfare through fair competition. This principal-agent problems exist especially in perspective of joint use of the mobile communication network, number portability, separation of phone distribution and phone service and network neutrality among in mobile communication policies since the early 1990s up to now.

• Industry Promotion Research
• /
• v.4 no.1
• /
• pp.21-27
• /
• 2019

This study is about the bidet which is used to clean the anal and local parts after the user seated on the left side of the toilet in the toilet. The cleaner of the bidet which is contaminated from various bacteria and dirt is washed clean with clean water to keep it clean The present invention relates to a cleaning device for a bidet cleaner that hygienically maintains a bidet used by a plurality of users. As a result of developing and studying a bidet nozzle that can be implemented with a bidet nozzle and a washing nozzle for automatically washing the jetting head of the bidet and the jetting head, the optimum jetting time of the nozzle after the hydraulic jetting is 1 second To 10 seconds, it was confirmed that the nozzle cleanliness of an average of 5 seconds was maintained at 100%. Subsequent studies will require further study of the durability of the product and the cleaning safety at a pressure of $5kg/mm^2$. Toilet bidet is a product that is closely related to the safety and life of the people, but the development of various technologies is still insufficient. Therefore, it is meaningful that this study contributed to the quality of life of the people by continuously researching and developing the bidet.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.4
• /
• pp.1-9
• /
• 2022

The purpose of this research is to improve sustainable clothes care by comparing household washer's standard course and quick course. Detergency at each course was classified by laundry weight, detergent concentration, and soils. Also, fabric damage from each course was compared. Washing experiments were carried out using two types of washing machines and three types of detergents. Using the standard soiled fabrics of EMPA 108 set, detergency was compared by laundry weight, soil, and detergent concentration. Additionally, fabric damage was evaluated using the mechanical action of MA-40. The results of the research were as follows. First, a standard course, having more working time exhibited better detergency than a quick course. However, the detergency deviation under 6kg laundry weight was as low as 9.0%. Second, detergency by the type of soil was more effective in standard course than in a quick course, but hydrophilic protein soils had a small detergency deviation at 7.6%. Moreover, hydrophobic oil, complex, and particulate soils had a higher deviation at 19.7% Third, fabric damage was in proportion to operating time. Fourth, a quick course showed approximately 80% detergency regardless of the type of detergent. in the case of using 50% of the recommended allowance by the detergent manufacturer. In conclusion, reducing the operating washing time and detergent concentration is in accordance with increasing sustainability, in the case of washing with lightly soiled fabrics under 6kg of laundry weight.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.166-172
• /
• 2015

This study was performed to develop treatment method for reducing microbial contamination on Daruma (a semi-processed product of seasoned and dried squid) by combination of strong acidic hypochlorous water (SAHW) and ultrasonic waves (UW). The available chlorine concentration, oxidation reduction potential (ORP) and pH of SAHW were $69.67{\pm}0.58ppm$, $1071.33{\pm}4.16mV$ and 2.79, respectively. The 1.49 log CFU/g of viable cell count and 1.32 log CFU/g of Staphylococcus aureus was reduced, and Escherichia coli was reduced below detection limit when the Daruma was treated with 20 times (w/v) of sodium hypochlorite solution (SHS) for 120 min. The 3.62 log CFU/g of viable cell count and 3.22 log CFU/g of Staphylococcus aureus was reduced, and Escherichia coli was reduced below detection limit when the Daruma was treated with 20 times (w/v) of SAHW for 120 min. The antibacterial effects of SAHW were stronger than those of SHS at same available chroline concentration. SAHW treatment after washing strongly alkalic electrolyzed water (SAEW) showed better bactericidal effects than SAHW treatment only. The 4.0 log CFU/g of viable cell count was reduced, S. aureus was reduced below regulation limit (Log 2.0 CFU/g), and E. coli was reduced below detection limit when the Daruma was treated with 20 times (w/v) of SAHW for 90 min after washing with 20 times (w/v) of SAEW for 60 min. The viable cell number was reduced below detection limit and S. aureus was reduced below regulation limit when the Daruma was treated with 20 times (w/v) of SAHW for 60 min in ultrasonic washer. E. coli was reduced below detection limit when the Daruma was treated with 20 times (w/v) of SAHW for 10 min in ultrasonic washer. These results suggest that combination of SAHW and UW may be a good technique to reduce the microbial contamination in daruma.