• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.214-223
• /
• 2014

This paper presents a bottleneck detection framework using simulation approach in a wafer FAB (Fabrication). In a semiconductor manufacturing industry, wafer FAB facility contains various equipment and dozens kinds of wafer products. The wafer FAB has many characteristics, such as re-entrant processing flow, batch tools. The performance of a complex manufacturing system (i.e. semiconductor wafer FAB) is mainly decided by a bottleneck. This paper defines the problem of a bottleneck process and propose a simulation based framework for bottleneck detection. The bottleneck is not the viewpoint of a machine, but the viewpoint of a step with the highest WIP in its upstream buffer and severe fluctuation. In this paper, focus on the classification of bottleneck steps and then verify the steps are not in a starvation state in last, regardless of dispatching rules. By the proposed framework of this paper, the performance of a wafer FAB is improved in on-time delivery and the mean of minimum of cycle time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1702-1703
• /
• 2011

MEMS 소자의 Wafer level Package 관련하여 Deep cavity를 가진 Cap Wafer와 Polymer bonding 중 cavity 단차로 인한 Polymer Patterning 및 접합 불량의 어려움을 극복할 수 있는 새로운 공정 flow를 제안하였다. Cavity를 형성할 때 사용하는 Si deep etching Mask인 기존의 Photoresist를 접합용 감광성 Polymer로 대체하고, cavity 형성 후, 별도의 추가 공정 없이 이 Polymer를 이용해 Wafer bonding을 진행하였다. 이를 통해 cavity 단차에 따른 문제를 해결함과 동시에 공정이 단순하고 제작 비용이 저렴하며, 신뢰성 있는 Wafer level Package를 구현하였다.

• Industrial Engineering and Management Systems
• /
• 제4권1호
• /
• pp.47-53
• /
• 2005

The efficiency of fabrication (fab) operation is one of the key factors in order for a semiconductor manufacturing company to stay competitive. Optimization of manpower and forecasting manpower needs in a modern fab is an essential part of the future strategic planing and a very important to the operational efficiency. As the semiconductor manufacturing technology has entered the 8-inch wafer era, the complexity of fab operation increases with the increase of wafer size. The wafer handling method has evolved from manual mode in 6-inch wafer fab to semi-automated or fully automated factory in 8-inch and 12-inch wafer fab. The distribution of manpower requirement in each specialty varied as the trend of fab operation goes for downsizing manpower with automation and outsourcing maintenance work. This paper is to study the specialty distribution of manpower from the requirement in a typical 6-inch, 8-inch to 12-inch wafer fab. The human resource planning in today’s fab operation shall consider many factors, which include the stability of technical talents. This empirical study mainly focuses on the human resource planning, the manpower distribution of specialty structure and the forecast model of internal demand/supply in current semiconductor manufacturing company. Considering the market fluctuation with the demand of varied products and the advance in process technology, the study is to design a headcount forecast model based on current manpower planning for direct labour (DL) and indirect labour (IDL) in Taiwan’s fab. The model can be used to forecast the future manpower requirement on each specialty for the strategic planning of human resource to serve the development of the industry.

• 산업경영시스템학회지
• /
• 제39권1호
• /
• pp.73-80
• /
• 2016

This study focuses on the formation of input release lots in a semiconductor wafer fabrication facility. After the order-lot pegging process assigns lots in the fab to orders and calculates the required quantity of wafers for each product type to meet customers' orders, the decisions on the formation of input release lots should be made to minimize the production costs of the release lots. Since the number of lots being processed in the wafer fab directly is related to the productivity of the wafer fab, the input lot formation is crucial process to reduce the production costs as well as to improve the efficiency of the wafer fab. Here, the input lot formation occurs before every shift begins in the semiconductor wafer fab. When input quantities (of wafers) for product types are given from results of the order-lot pegging process, lots to be released into the wafer fab should be formed satisfying the lot size requirements. Here, the production cost of a homogeneous lot of the same type of product is less than that of a heterogeneous lot that will be split into the number of lots according to their product types after passing the branch point during the wafer fabrication process. Also, more production cost occurs if a lot becomes more heterogeneous. We developed a multi-dimensional dynamic programming algorithm for the input lot formation problem and showed how to apply the algorithm to solve the problem optimally with an example problem instance. It is necessary to reduce the number of states at each stage in the DP algorithm for practical use. Also, we can apply the proposed DP algorithm together with lot release rules such as CONWIP and UNIFORM.

• 한국시뮬레이션학회논문지
• /
• 제15권2호
• /
• pp.51-57
• /
• 2006

현재 반도체 산업은 200mm 웨이퍼에서 300mm 웨이퍼 공정으로 기술이 변화하고 있다. 300mm 웨이퍼 제조업체들은 Fabrication Line (FAB Line) 자동화를 비용절감 실현의 방책으로 사용하고 있다. 또한 기술의 확산, 시장 경쟁력의 격화 등으로 생산성 향상에 의한 원가절감이 반도체 산업 성장의 근본요인이 되고 있다. 대부분의 반도체 업체들은 생산성을 높이기 위해 average cycle time을 줄이는데 총력을 기울이고 있다. 본 논문에서는 average cycle time을 줄이는 데 중점을 두고, 300mm 반도체 제조공정을 시뮬레이션 하였다.

• 지능정보연구
• /
• 제9권1호
• /
• pp.157-177
• /
• 2003

본 논문은 반도체 FAB공정의 수율개선 및 예측을 위해 데이터마이닝 기법을 적용한 사례를 소개한다. FAB 공정의 복잡성과 생산현장에서 수집되는 방대한 기술데이터로 인해 기존의 통계적 방법이나 엔지니어의 경험적 분석 방법만으로는 미처 파악하지 못하는 수율 저하 요인이 상당 수 존재한다. 본 논문은 먼저, FAB공정을 마친 웨이퍼에 불량 칩(chip)이 지리적으로 특정 위치에 집중적으로 발생하는 현상을 육안검사 대신 군집분석을 이용하여 데이터로부터 자동 판별할 수 있는 방법을 제안한다. 다음으로 연속패턴분석, 분류분석, RBF(Radial Base Function) 기법을 적용하여 수율 저하의 원인이 되는 문제 장비나 문제 파라미터를 신속, 정확하게 파악할 수 있도록 해 줄 뿐만 아니라 공정 진행 중인 제품의 미래 수율을 예측할 수 있도록 지원하는 방법을 제안한다. 또한 위 기법들을 반도체 FAB공정을 대상으로 국내 모 반도체 회사에서 정보시스템으로 구현한 Y2R-PLUS (Yield Rapid Ramp-up, Prediction, analysis ＆ Up Support) 시스템을 소개한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.78.2-78
• /
• 1998

• Safety and Health at Work
• /
• 제9권3호
• /
• pp.249-256
• /
• 2018

This article aims to provide a systematic review of the exposure assessment methods used to assign wafer fabrication (fab) workers in epidemiologic cohort studies of mortality from all causes and various cancers. Epidemiologic and exposure-assessment studies of silicon wafer fab operations in the semiconductor industry were collected through an extensive literature review of articles reported until 2017. The studies found various outcomes possibly linked to fab operations, but a clear association with the chemicals in the process was not found, possibly because of exposure assessment methodology. No study used a tiered assessment approach to identify similar exposure groups that incorporated manufacturing era, facility, fab environment, operation, job and level of exposure to individual hazardous agents. Further epidemiologic studies of fab workers are warranted with more refined exposure assessment methods incorporating both operation and job title and hazardous agents to examine the associations with cancer risk or mortality.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.401-406
• /
• 1988

Various types and huge volume of information such as process instructions, work-in process and parametric data are created in a wafer fabrication process and should be provided to personnels inside or outside the facility. This article describes design criteria and functional description on the information system for small-scale wafer fabrication process to accomplish paperless fab and to support efficient fab management.

• 센서학회지
• /
• 제29권5호
• /
• pp.354-359
• /
• 2020

The high vacuum hermetic sealing technique ensures excellent performance of MEMS resonators. For the high vacuum hermetic sealing, the customization of anodic bonding equipment was conducted for the glass/Si/glass triple-stack anodic bonding process. Figure 1 presents the schematic of the MEMS resonator with triple-stack high-vacuum anodic bonding. The anodic bonding process for vacuum sealing was performed with the chamber pressure lower than 5 × 10^-6 mbar, the piston pressure of 5 kN, and the applied voltage was 1 kV. The process temperature during anodic bonding was 400 ℃. To maintain the vacuum condition of the glass cavity, a getter material, such as a titanium thin film, was deposited. The getter materials was active at the 400 ℃ during the anodic bonding process. To read out the electrical signals from the Si resonator, a vertical feed-through was applied by using through glass via (TGV) which is formed by sandblasting technique of cap glass wafer. The aluminum electrodes was conformally deposited on the via-hole structure of cap glass. The TGV process provides reliable electrical interconnection between Si resonator and aluminum electrodes on the cap glass without leakage or electrical disconnection through the TGV. The fabricated MEMS resonator with proposed vacuum packaging using three-layer anodic bonding process has resonance frequency and quality factor of about 16 kHz and more than 40,000, respectively.