• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.58-58
• /
• 2000

Recently low resistance of bus line is required for large screen size RFT-CLD panels. As a result, lower resistance Al-alloy is currently reviewed extensively. The resistivity is required smaller than 10$\mu$$\Omega$cm and high resistance of chemical attack is required. In this paper, Al-W thin film were deposited on glass substrates by D.C magnetron sputtering system under various condition for high chemical resistance. Its properties were characterized by SEM, AFM, XRD, 4-point-probe, and cyclic voltammertry. The optimal condition of Al-W was 10$0^{\circ}C$, 100W, 0.4Pa, 23sccm(Ar) and 35$0^{\circ}C$, 20min. annealing. At that condition the resistivity of Al-W(3 wt.%) was about 11$\mu$$\Omega$cm. And when wt.% of W in Al-W alloy was higher than about 4%, Al-W alloy thin film has high chemical resistance.

• Korean Journal of Poultry Science
• /
• v.16 no.2
• /
• pp.73-81
• /
• 1989

This study was conducted to estimate heritabilities, genetic and phenotypic correlations on economic traits in layers. The data analysis were the records of 351 pullets in S. C. W. Leghorn and 326 pullets in R. I. Red from March 1, 1980 to July 31.1981. The results obtained are summarized as follows：1 The average body weights at the first egg, 300 and 500 days of age were 1, 409, 1, 602 and 1, 709g S. C. W. Leghorn, and 1, 965, 2, 305, and 2, 479g in the R. I. Red, respectively. The age at first egg of the S. C. W, Leghorn and R. I. Red were 156 days and 163 days, respectively. The number of egg produced by the S. C. W. Leghorn and R. I. Red to 300 days and 500 days of age were 101.18, 214.39, and 101.05, 214.93, respectively. The egg weight at first egg, 300 and 500 days of age were 41.93, 57.65 and 60.33g in the S. C. W. Leghorn and 41.52, 57.62 and 60.57g in the R. I. Red, respectively. 2. The heritability estimates based on the variance of sire and dam components were 0.402-0.612 and 0.275-0.458 in the S. C. W. Leghorn, 0.309-0.523 and 0.134-0.380 in R. I. Red for body weight； 0.167 and 0.139 in the 5. C. W. Leghorn, 0.169 and 0.095 in the R.1. Red for age at first egg：0.214-0.139 and 0.336-0.341 in S. C. W Leghorn, 0.137-0.259 and 0.024-0.102 in the R. I. Red for number of egg production； 0.537-0.769 and 0.374-0.686 in the S. C. W. Leghorn, 0.519-0.631 and 0.116-0.365 in the R. I. Red for egg weight, respectively. 3. The genetic correlation coefficients of economic traits were as follows： In the S. C. W. Leghorn and R. I. Red , the coefficients between body weights and age at the first egg, 0.328-0.426 and 0.186-0.244：between body weights and number of egg production, -0.666--0.498 and -0.452--0.073：between body weight and egg weight, 0.384-0.774 and 0.126-0.612； between age at first egg and number of egg production, -0.639--0.452 and -0.754--0.320； between age at first egg and egg weight, 0.475-0.705 and 0.021-0.605； between number of egg production and egg weight, -0.623--0.355 and -0.861--0.327, respectively.

• Journal of Powder Materials
• /
• v.2 no.3
• /
• pp.238-246
• /
• 1995

The purpose of this study is to establish powder metallurgy (P/M) fabrication processes for high performance 2XXX Al composites reinforced with SiC whiskers. Rapidly solidified 2XXX Al powders produced by commercial atomization technique were mixed with SiC whiskers. The results of mixing processes indicated that fluidized zone mixing technique was considerably effective for the large scale production of the mixture of Al powders and whiskers. In order to consolidate these $Al-SiC_w$ mixtures into $Al-SiC_w$ composite billets, a vacuum hot press was set up, and hot processing variables were investigated. Using the hot pressing temperature of $620^{\circ}C$ under the pressure of 50 MPa, good quality $Al-SiC_w$ composite billets having relatively homogeneous microstructure and sound Al/sic interfacial bonding were obtained. Composite billets were then extruded to bars having relatively homogeneous microstructures at the extrusion temperature of 450~500$^{\circ}C$ under the extrusion pressure of 700~ 1000 MPa. Mechanical properties of the extruded bars were found to be comparable with those of the composite processed by Advanced Composite Materials Corp. To improve mechanical properties of the composites, elimination of coarse intermetallic compounds, uniform distribution of reinforcements, and minimization of whisker breakage are suggested.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.203-207
• /
• 2009

Copper is known as a replacement for aluminum wire which is used for semiconductor. Because specific resistance of Cu ($1.67{\mu}{\Omega}$-cm) is lower than that of Al ($2.66{\mu}{\Omega}$-cm), Cu reduce RC delay time. Although melting point of Cu($1085^{\circ}C$) is higher than melting point of Al, Cu have characteristic to easily react with Silicon(Si) in low temperature, and it isn't good at adhesive strength with Si. For above these reason, research of diffusion barrier to prevent reaction between Cu and Si and to raise adhesive strength is steadily advanced. Our study group have researched on W-C-N (tungsten-carbon-nitrogen) Diffusion barrier for preventing diffusion of Cu through semiconductor. By recent studies, It's reported that W-C-N diffusion barrier can even precent Cu and Si diffusing effectively at high temperature. In this treatise, we vaporized different proportion of N into diffusion barrier to research Cu's Electromigration based on the results and studied surface hardness in the heat process using nano scale indentation system. We gain that diffusion barrier containing nitrogen is more stable for Cu's electromigration and has stronger surface hardness in heat treatment process.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.6
• /
• pp.1268-1277
• /
• 2023

In this study, to evaluate the possibility of utilizing Chamaecyparis obtusa (Siebold & Zucc.) Endl. (C. obtusa) leaf fractions as anti-inflammatory functional materials, C. obtusa extract extracted with 99% ethanol (CO99EL) was fractionated with hexane (CO99EL-H), chloroform (CO99EL-C), ethyl acetate (CO99EL-E), butanol (CO99EL-B) and distilled water (CO99EL-W). The anti-inflammatory effects of each fraction was performed using lipopolysaccharide (LPS)-induced RAW264.7 mouse macrophages. Cytotoxicity was highest in CO99EL-H and CO99EL-C and lowest in CO99EL-W. Interestingly, LPS-induced iNOS expression and NO production were significantly reduced by CO99EL-H and CO99EL-E, and COX-2 expression was significantly reduced by CO99EL-B and CO99EL-W. In addition, interleukin (IL)-1𝛽, an inflammatory cytokine increased by LPS, was significantly reduced by CO99EL-C, CO99EL-E, CO99EL-B and CO99EL-W, and IL-6 was significantly reduced by CO99EL-B and CO99EL-W. Therefore, the janus kinase (JAK)/signaling transducer and activator of transcription (STAT) signaling pathway activated by LPS was significantly reduced by CO99EL-H and CO99EL-C, and the mitogen-activated protein kinase (MAPK) signaling pathway was slightly reduced by CO99EL-H and CO99EL-C. However, nuclear factor (NF)-𝜅B activity was not reduced by any fractions. Based on the results of this study, it was confirmed that CO99EL fractions have different anti-inflammatory mechanisms depending on the solvent used for fractionation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.83-91
• /
• 2019

The purpose of this study is to assess a fire-damaged concrete structure using a digital camera and image processing software. To simulate it, mortar and paste samples of W/C=0.5(general strength) and 0.3(high strength) were put into an electric furnace and simulated from $100^{\circ}C$ to $1000^{\circ}C$. Here, the paste was processed into a powder to measure CIELAB chromaticity, and the samples were taken with a digital camera. The RGB chromaticity was measured by color intensity analyzer software. As a result, the residual compressive strength of W/C=0.5 and 0.3 was 87.2 % and 86.7 % at the heating temperature of $400^{\circ}C$. However there was a sudden decrease in strength at the temperature above $500^{\circ}C$, while the residual compressive strength of W/C=0.5 and 0.3 was 55.2 % and 51.9 % of residual strength. At the temperature $700^{\circ}C$ or higher, W/C=0.5 and W/C=0.3 show 26.3% and 27.8% of residual strength, so that the durability of the structure could not be secured. The results of $L^*a^*b$ color analysis show that $b^*$ increases rapidly after $700^{\circ}C$. It is analyzed that the intensity of yellow becomes strong after $700^{\circ}C$. Further, the RGB analysis found that the histogram kurtosis and frequency of Red and Green increases after $700^{\circ}C$. It is analyzed that number of Red and Green pixels are increased. Therefore, it is deemed possible to estimate the degree of damage by checking the change in yellow($b^*$ or R+G) when analyzing the chromaticity of the fire-damaged concrete structures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.917-920
• /
• 2008

고속 이동통신의 발전으로 인하여 무선 상에서 웹 브라우징 서비스를 효율적으로 받으려는 요구가 늘고 있지만 기술적인 측면과 표준화 분야 측면에서 아직까지 충분한 지원이 이루어지고 있지 않다. 이러한 문제점을 해결하고자 W3C MWI Activity는 모바일 웹 브라우징 환경의 호환성 확보와 유무선 웹 콘텐츠간의 효과적인 연동을 위한 목적으로 활동을 시작하였고, 이를 위해 필요한 모바일 웹 콘텐츠 저작/활용에 대한 모범사례 분석과 가이드라인 표준화, 모바일 단말 정보 공유활용 방안 등에 대한 표준화를 진행해오고 있다. 또한 표준 웹 콘텐츠 인증을 위해 모바일 OK 인증표준화를 추진하고 있다. 본 연구에서는 이러한 W3C 모바일 웹 이니셔티브(MWI: Mobile Web Initiative)" 대한 기술 및 표준화 활동을 살펴보고자 한다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.215-217
• /
• 2007

반도체 집적화 기술의 발달로 반도체 공정에서 디바이스의 선폭은 줄어들고, 박막의 다층화가 필수적인 과정이 되었다. 이에 따라 반도체에서 Si 기판과 금속 배선과의 열적 안정성에 대한 신뢰성이 더욱 중요시 되어가고 있다. 이를 방지하기 위하여 우리는 3개의 화합물로 구성된 Tungsten-Carbon-Nitrogen (W-C-N) 확산방지막을 사용하였다. 실험은 Si 기판위에 W-C-N박막을 물리적 기상 증착법(PVD)으로 질소비율을 변화하며 확산방지막을 증착하여 Si 기판과 W-C-N확산방지막의 특성을 여러 온도 열처리 조건에서 확인하였다. 특성을 분석을 위하여 ${\alpha}-step$과 ${\beta}-ray$를 이용하여 증착률을 확인한 후 4-point probe를 이용하여 비저항을 측정하였고, X-ray Diffraction 분석을 통하여 결정 내부의 변화를 확인하였다. 이를 통하여 W-C-N 확산방지막의 열적인 안정성을 질소변화에 따라 조사하였다.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.6
• /
• pp.1963-1971
• /
• 2015

Let $\mathcal{A}$ and $\mathcal{B}$ be two unital $C^*$-algebras. Denote by W(a) the numerical range of an element $a{\in}\mathcal{A}$. We show that the condition W(ax) = W(bx), ${\forall}x{\in}\mathcal{A}$ implies that a = b. Using this, among other results, it is proved that if ${\phi}$ : $\mathcal{A}{\rightarrow}\mathcal{B}$ is a surjective map such that $W({\phi}(a){\phi}(b){\phi}(c))=W(abc)$ for all a, b and $c{\in}\mathcal{A}$, then ${\phi}(1){\in}Z(B)$ and the map ${\psi}={\phi}(1)^2{\phi}$ is multiplicative.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.165-168
• /
• 2005

This paper investigated the effect of W/C and the kinds of cement on the chloride invasion resistance of the offshore concrete. W/C set up 0.30, 0.35, 0.40 and The kinds of cement were used four(ordinary portland cement, ground granulated blast-furnace slag cement, belite cement, low heat portland cement). For the electrical migration test, NT BUILD 492's method was used to estimate the migration coefficient of chloride ion. As a result, the migration coefficients of chloride ion of concrete according to w/c were shown reducing with the w/c increasing, and according to kinds of cement were shown discrepancy in chloride invasion resistance. Especially blast-furnace slag cement was most low it. In the each cement, the compressive strength was shown related to the migration coefficient.