• 제목/요약/키워드: volume function model

검색결과 505건 처리시간 0.03초

강원도 지방 소나무의 지역(地域) 간곡선(幹曲線) 및 재적식(材積式) 모델 (Regional Stem Curve and Volume Function Model of Pinus densiflora in Kangwon-Province)

  • 김준순;이우균;변우혁
    • 한국산림과학회지
    • /
    • 제83권4호
    • /
    • pp.521-530
    • /
    • 1994
  • 재적식(材積式)은 보통 흉고직경과 수고의 함수로 표현되는데, 회귀분석(回歸分析)을 통해 정확도가 높은 식이 주로 채택되고 있다. 우리나라에서도 지금까지 흉고직경(D)과 수고(H)를 독립변수로 하는 지수식(指數式)($V=aD^bH^c$)으로 각 수종에 대한 일반(一般)재적식을 유도하고 있다. 본 연구에서는 강원도 지방내의 홍천, 정선, 명주, 원주, 영월지역에 대한 간곡선식(幹曲線式)을 지역별로 유도하고, 이 간곡선식의 회전체(回轉體) 적분(積分)을 통해 지역별 재적을 직접 추정할 수 있는 간곡선 및 재적식 모델을 마련하였다. 조제된 모델에 의해 지역별로 추정된 재적은 기존의 강원도 지방 소나무재적표에 의해 추정된 재적에 비해 정확도가 높았다. 또한 지역간곡선식에 의해 유도된 간곡선의 형태는 지역에 따라 서로 달랐으며, 특히 영월지역과 원주지역의 수간은 다른 지역에 비해 수간상부에서 가늘게 발달하는 것으로 나타났다. 이와같은 간곡선의 다양한 형태는 재적추정에 있어서도 지역간 차이를 유발하였다.

  • PDF

산림자원 및 산림의 공익기능량 추정을 위한 시스템다이내믹스 모형 개발 (Development of a System Dynamics Model For Estimating the Volume of Forest Resources and Function of Public Benefit)

  • 조윤숙
    • 한국시스템다이내믹스연구
    • /
    • 제15권3호
    • /
    • pp.5-36
    • /
    • 2014
  • The purpose of this paper is to develop a System Dynamics model for estimating the volume of forest resources in the future and simulating the volume of function of public benefit linked to forest resources in dynamic manner. Also it is to analyze the impact when the volume of forest land conversion is controlled by policy using the SD model. The analysis was done at nation-wide for the simulation period 2000 to 2040. Estimated forest area was 6.2 million ha and estimated growing stock was $4.7\;billion\;m^3$ in 2040 from the future forecast without policies. Changing of forest resources, 13.9 billion tons of forest-ground-water storage was estimated, $1.8\;million\;m^3$ of erosion control of forest was estimated and 377 million tons of $CO_2$ absorption was estimated. As a result of simulation with two alternatives, forest area was less reduced and growing stock was bigger than do nothing policy. Also, function of public benefit reflected by changes of forest resources was enhanced. This study contributes to estimate the quantitatively measured volume of forest resources and function of public benefit over the 30 years in Korean forest land in scientific way. Using this SD model, decision maker would develop forest land policies more delicately for deserving forest resources and increasing the volume of function of public.

  • PDF

Cavitation 현상에 관한 수치적 연구 (The Numerical Study on the Cavitation)

  • 장선용;이창진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제23회 추계학술대회 논문집
    • /
    • pp.126-131
    • /
    • 2004
  • Pressure-based 알고리듬을 기반으로 한 cavitation 현상의 수치해석 코드를 개발하였다. Wall function을 사용한 k-\varepsilon$ 난류모델을 사용하였으며, cavitation 모델에는 volume transport equation을 사용하였다. 유동장은 저속이기 때문에 압축성 효과는 고려하지 않았다.

  • PDF

보전비용 증가와 생산량 감소를 고려한 공정평균이동 모형 (A Process Mean Shift Model Considering The Increasing Maintenance Cost and The Decreasing Production Volume)

  • 이도경
    • 융합정보논문지
    • /
    • 제11권3호
    • /
    • pp.125-131
    • /
    • 2021
  • 모든 장비는 지속적인 사용에 의해 공정의 생산성과 경제성은 감소한다. 그러므로 일정 시점에서는 공정평균이동 문제라는 설비에 대한 예방보전이 필요하다. 설비의 보전시기를 결정함에 있어, 우리는 기존 연구에서 부분적으로 진행되어 온 보전모형들을 확장하고 통합함으로써 다양한 상황이 발생하는 생산 현장을 반영한 보전모형을 제시하고자 한다. 이를 구현하기 위해 제품규격은 상하한의 양쪽을 설정했으며, 적합품에 대해 품질손실함수를 도입했다. 마모수준에 대한 공정분산은 상수가 아닌 함수로 설정했으며, 특히 제품생산량과 보전비용에 있어서는 마모수준에 대한 함수를 개발하여 적용했다. 이로써 본 연구는 현장의 다양한 공정에 대부분 적용할 수 있는 보전모형이 될 것으로 생각한다. 추후 연구에서는 보전모형을 구성하는 부적합비용, 품질손실비용, 보전비용에 더하여 제품판매로 인한 수익 항목을 추가한 전체 수익 최대화 문제로 전개할 수 있을 것이며, 크게는 본 연구의 모형에 고장률을 도입한 보전모형으로의 확장도 생각해 볼 수 있을 것이다.

Theoretical prediction on thickness distribution of cement paste among neighboring aggregates in concrete

  • Chen, Huisu;Sluys, Lambertus Johannes;Stroeven, Piet;Sun, Wei
    • Computers and Concrete
    • /
    • 제8권2호
    • /
    • pp.163-176
    • /
    • 2011
  • By virtue of chord-length density function from the field of statistical physics, this paper introduced a quantitative approach to estimate the distribution of cement paste thickness between aggregates in concrete. Dynamics mixing method based on molecular dynamics was employed to generate one model structure, then image analysis algorithm was used to obtain the distribution of thickness of cement paste in model structure for the purpose of verification. By comparison of probability density curves and cumulative probability curves of the cement paste thickness among neighboring aggregates, it is found that the theoretical results are consistent with the simulation. Furthermore, for the model mortar and concrete mixtures with practical volume fraction of Fuller-type aggregate, this analytical formula was employed to predict the influence of aggregate volume fraction and aggregate fineness. And evolution of its mean values were also investigated with the variation of volume fraction of aggregate as well as the fineness of aggregates in model mortars and concretes.

Numerical modeling of concrete conveying capacity of screw conveyor based on DEM

  • Yu, Wenda;Zhang, Ke;Li, Dong;Zou, Defang;Zhang, Shiying
    • Computers and Concrete
    • /
    • 제29권 6호
    • /
    • pp.361-374
    • /
    • 2022
  • On the premise of ensuring that the automatic and quantitative discharging function of concrete conveyors is met, the accuracy of the weight forecast by the mathematical model of the screw conveying volume is improved, and the error of the weight of the concrete parts and the accumulation thickness is reduced. In this paper, the discrete element method (DEM) is used to simulate the macroscopic flow of concrete. Using the concrete discrete element model, the size of the screw conveyor is set, and establish the response model between the influencing factors (process and structure) and the concrete mass flow rate according to the design points of the screw discharging experiment. The nonlinear data fitting method is used to obtain the volumetric efficiency function under the influence of process and structural factors, and the traditional screw conveying volume model is improved. The mass flow rate of concrete predicted by the improved mathematical model of screw conveying volume is consistent with the test results. The model can accurately describe the conveying process of concrete and achieve the purpose of improving the accuracy of forecasting the weight of discharged concrete.

Retrieval of Non-rigid 3D Models Based on Approximated Topological Structure and Local Volume

  • Hong, Yiyu;Kim, Jongweon
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권8호
    • /
    • pp.3950-3964
    • /
    • 2017
  • With the increasing popularity of 3D technology such as 3D printing, 3D modeling, etc., there is a growing need to search for similar models on the internet. Matching non-rigid shapes has become an active research field in computer graphics. In this paper, we present an efficient and effective non-rigid model retrieval method based on topological structure and local volume. The integral geodesic distances are first calculated for each vertex on a mesh to construct the topological structure. Next, each node on the topological structure is assigned a local volume that is calculated using the shape diameter function (SDF). Finally, we utilize the Hungarian algorithm to measure similarity between two non-rigid models. Experimental results on the latest benchmark (SHREC' 15 Non-rigid 3D Shape Retrieval) demonstrate that our method works well compared to the state-of-the-art.

Material distribution optimization of 2D heterogeneous cylinder under thermo-mechanical loading

  • Asgari, Masoud
    • Structural Engineering and Mechanics
    • /
    • 제53권4호
    • /
    • pp.703-723
    • /
    • 2015
  • In this paper optimization of volume fraction distribution in a thick hollow cylinder with finite length made of two-dimensional functionally graded material (2D-FGM) and subjected to steady state thermal and mechanical loadings is considered. The finite element method with graded material properties within each element (graded finite elements) is used to model the structure. Volume fractions of constituent materials on a finite number of design points are taken as design variables and the volume fractions at any arbitrary point in the cylinder are obtained via cubic spline interpolation functions. The objective function selected as having the normalized effective stress equal to one at all points that leads to a uniform stress distribution in the structure. Genetic Algorithm jointed with interior penalty-function method for implementing constraints is effectively employed to find the global solution of the optimization problem. Obtained results indicates that by using the uniform distribution of normalized effective stress as objective function, considerably more efficient usage of materials can be achieved compared with the power law volume fraction distribution. Also considering uniform distribution of safety factor as design criteria instead of minimizing peak effective stress affects remarkably the optimum volume fractions.

굴 산지시장의 위판량과 가격관계 (The Volume and Price Relationship of the Oyster Market in Producing Area)

  • 강석규
    • 수산경영론집
    • /
    • 제32권1호
    • /
    • pp.1-14
    • /
    • 2001
  • The research on the price-volume relation in the market is very important because it examines into regular phenomenon revealed by market participants including producers and middlemen. The purpose of this study is to investigate the relationship between price and trading volume in the oyster producing market. In order to accomplish the purpose of this study, the contents of empirical analysis include the time series properties of price and trading volume, the short-term and long-term relationships between price and trading volume, and the determinants of trading volume. The data used in this study correspond to daily price and trading volume covering the time period from January 1998 to April 2001. The empirical results can be summarized as follows : First, price and trading volume follow random walks and they are integrated of order 1. The first difference is necessary for satisfying the stationary conditions. Second, price and trading volume are cointegrated. This long-run relationship is stronger from trading volume to price. Third, error correction model suggests that feedback effect exists in the long-run and that price tends to lead trading volume by about five days in the short run, that is, to be required period by digging, conveying, and peeling oystershell for selling oyster. Fourth, price and price volatility is a determinant of trading volume. In particular, trading volume is a negative function of price. It is believed that the conclusion drawn from this study would provide a useful standard for the policy makers in charge of reducing the oyster price volatility risk caused by trading volume(selling quantities).

  • PDF

Mathematical Description of the Volume of Distribution in the Isolated Organ

  • Kim, Chong-Kook;Kim, Yang-Bae
    • Journal of Pharmaceutical Investigation
    • /
    • 제10권1호
    • /
    • pp.1-3
    • /
    • 1980
  • The model of an isolated organ system has been developed to simulate the kinetic behavior of drug levels in an acting organ or site. The model is developed from basic considerations of drug distribution with hemodynamical and pharmacokinetical meanings. Model: It is considered a situation in which non-metabolic drug substance is injected into the arterial inflow of an isolated organ at constant rate. The volume of distribution and the concentration of drug in the venous outflow can be mathematically expressed as a function of time.

  • PDF