• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.521-530
• /
• 1994

Voume functions, which are usually expressed by the function of dbh and height, are estimated commonly through the regression analysis with the highest statistical accuracy considered. In Korea, general volume functions for each tree species were prepared by means of the regression analysis with the exponential function ($V=aD^bH^c$) having the dbh(D) and height(H) as independent variables. In this study, regional stem curve functions for the Pinus densiflora in Kangwon-province were derived and a regional volume function model, in which the stem volume can be directly estimated through the rotational integral of the regional stem curve functions, was prepared. The regional volume estimated by the prepared model was more accurate than the volume by the general volume table for the Pinus densiflora in Kangwon-province. Additionary, the form of stem curves derived by the regional stem curve functions showed difference from each other. The stem in Youngwol and Wonju taper down more fast in upper part than that in other regions. These various stem forms also led to the regional difference in volume estimates.

• Korean System Dynamics Review
• /
• v.15 no.3
• /
• pp.5-36
• /
• 2014

The purpose of this paper is to develop a System Dynamics model for estimating the volume of forest resources in the future and simulating the volume of function of public benefit linked to forest resources in dynamic manner. Also it is to analyze the impact when the volume of forest land conversion is controlled by policy using the SD model. The analysis was done at nation-wide for the simulation period 2000 to 2040. Estimated forest area was 6.2 million ha and estimated growing stock was $4.7\;billion\;m^3$ in 2040 from the future forecast without policies. Changing of forest resources, 13.9 billion tons of forest-ground-water storage was estimated, $1.8\;million\;m^3$ of erosion control of forest was estimated and 377 million tons of $CO_2$ absorption was estimated. As a result of simulation with two alternatives, forest area was less reduced and growing stock was bigger than do nothing policy. Also, function of public benefit reflected by changes of forest resources was enhanced. This study contributes to estimate the quantitatively measured volume of forest resources and function of public benefit over the 30 years in Korean forest land in scientific way. Using this SD model, decision maker would develop forest land policies more delicately for deserving forest resources and increasing the volume of function of public.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.126-131
• /
• 2004

A numerical code for cavitation is developed based on pressure-based algorithm. The k-\varepsilon$ model (with wall function) is used for turbulence, and volume transport equation is used for cavitation model. The compressibility is not considered for the flow field is low speed.

• Journal of Convergence for Information Technology
• /
• v.11 no.3
• /
• pp.125-131
• /
• 2021

The problem of determining the maintenance point which minimizes the process-related total cost is called the 'process mean shift problem'. By expanding and integrating the existing maintenance models that have been partially progressed, we present a expanded and integrated maintenance model which reflects the production site where various situations occur. To implement this, we set both the upper and lower limits of the product specification, and adopted the quality loss function for conforming items. Also, we set the process variance of the wear level as a function rather than a constant. In this study, we developed two general functions to the wear level. One is about the production volume and the other is maintenance cost. As a result, this study is expected to be a maintenance model that can be applied to various processes. In the future, this study can be developed as a profit maximization model by adding profit items from product sales, and expansion to a maintenance model that introduces failure to the model of this study can be considered.

• Computers and Concrete
• /
• v.8 no.2
• /
• pp.163-176
• /
• 2011

By virtue of chord-length density function from the field of statistical physics, this paper introduced a quantitative approach to estimate the distribution of cement paste thickness between aggregates in concrete. Dynamics mixing method based on molecular dynamics was employed to generate one model structure, then image analysis algorithm was used to obtain the distribution of thickness of cement paste in model structure for the purpose of verification. By comparison of probability density curves and cumulative probability curves of the cement paste thickness among neighboring aggregates, it is found that the theoretical results are consistent with the simulation. Furthermore, for the model mortar and concrete mixtures with practical volume fraction of Fuller-type aggregate, this analytical formula was employed to predict the influence of aggregate volume fraction and aggregate fineness. And evolution of its mean values were also investigated with the variation of volume fraction of aggregate as well as the fineness of aggregates in model mortars and concretes.

• Computers and Concrete
• /
• v.29 no.6
• /
• pp.361-374
• /
• 2022

On the premise of ensuring that the automatic and quantitative discharging function of concrete conveyors is met, the accuracy of the weight forecast by the mathematical model of the screw conveying volume is improved, and the error of the weight of the concrete parts and the accumulation thickness is reduced. In this paper, the discrete element method (DEM) is used to simulate the macroscopic flow of concrete. Using the concrete discrete element model, the size of the screw conveyor is set, and establish the response model between the influencing factors (process and structure) and the concrete mass flow rate according to the design points of the screw discharging experiment. The nonlinear data fitting method is used to obtain the volumetric efficiency function under the influence of process and structural factors, and the traditional screw conveying volume model is improved. The mass flow rate of concrete predicted by the improved mathematical model of screw conveying volume is consistent with the test results. The model can accurately describe the conveying process of concrete and achieve the purpose of improving the accuracy of forecasting the weight of discharged concrete.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.3950-3964
• /
• 2017

With the increasing popularity of 3D technology such as 3D printing, 3D modeling, etc., there is a growing need to search for similar models on the internet. Matching non-rigid shapes has become an active research field in computer graphics. In this paper, we present an efficient and effective non-rigid model retrieval method based on topological structure and local volume. The integral geodesic distances are first calculated for each vertex on a mesh to construct the topological structure. Next, each node on the topological structure is assigned a local volume that is calculated using the shape diameter function (SDF). Finally, we utilize the Hungarian algorithm to measure similarity between two non-rigid models. Experimental results on the latest benchmark (SHREC' 15 Non-rigid 3D Shape Retrieval) demonstrate that our method works well compared to the state-of-the-art.

• Structural Engineering and Mechanics
• /
• v.53 no.4
• /
• pp.703-723
• /
• 2015

In this paper optimization of volume fraction distribution in a thick hollow cylinder with finite length made of two-dimensional functionally graded material (2D-FGM) and subjected to steady state thermal and mechanical loadings is considered. The finite element method with graded material properties within each element (graded finite elements) is used to model the structure. Volume fractions of constituent materials on a finite number of design points are taken as design variables and the volume fractions at any arbitrary point in the cylinder are obtained via cubic spline interpolation functions. The objective function selected as having the normalized effective stress equal to one at all points that leads to a uniform stress distribution in the structure. Genetic Algorithm jointed with interior penalty-function method for implementing constraints is effectively employed to find the global solution of the optimization problem. Obtained results indicates that by using the uniform distribution of normalized effective stress as objective function, considerably more efficient usage of materials can be achieved compared with the power law volume fraction distribution. Also considering uniform distribution of safety factor as design criteria instead of minimizing peak effective stress affects remarkably the optimum volume fractions.

• The Journal of Fisheries Business Administration
• /
• v.32 no.1
• /
• pp.1-14
• /
• 2001

The research on the price-volume relation in the market is very important because it examines into regular phenomenon revealed by market participants including producers and middlemen. The purpose of this study is to investigate the relationship between price and trading volume in the oyster producing market. In order to accomplish the purpose of this study, the contents of empirical analysis include the time series properties of price and trading volume, the short-term and long-term relationships between price and trading volume, and the determinants of trading volume. The data used in this study correspond to daily price and trading volume covering the time period from January 1998 to April 2001. The empirical results can be summarized as follows : First, price and trading volume follow random walks and they are integrated of order 1. The first difference is necessary for satisfying the stationary conditions. Second, price and trading volume are cointegrated. This long-run relationship is stronger from trading volume to price. Third, error correction model suggests that feedback effect exists in the long-run and that price tends to lead trading volume by about five days in the short run, that is, to be required period by digging, conveying, and peeling oystershell for selling oyster. Fourth, price and price volatility is a determinant of trading volume. In particular, trading volume is a negative function of price. It is believed that the conclusion drawn from this study would provide a useful standard for the policy makers in charge of reducing the oyster price volatility risk caused by trading volume(selling quantities).

• Journal of Pharmaceutical Investigation
• /
• v.10 no.1
• /
• pp.1-3
• /
• 1980

The model of an isolated organ system has been developed to simulate the kinetic behavior of drug levels in an acting organ or site. The model is developed from basic considerations of drug distribution with hemodynamical and pharmacokinetical meanings. Model: It is considered a situation in which non-metabolic drug substance is injected into the arterial inflow of an isolated organ at constant rate. The volume of distribution and the concentration of drug in the venous outflow can be mathematically expressed as a function of time.