• 대한전자공학회논문지SD
• /
• 제41권7호
• /
• pp.89-96
• /
• 2004

넓은 범위의 전압-제어 발진기 및 자동 이득 조절기의 실현을 위한 고선형 전압-제어 전류원(VCCS) 회로를 제안하였다. 제안한 VCCS는 전압 입력을 위해 이미터 폴로워, 전류 출력을 위해 이미터가 결합된 두 개의 공통-베이스 증폭기, 그리고 넓은 범위의 전류 출력과 높은 선형성을 얻기 위해 두 증폭기를 결합한 전류 미러로 구성된다. VCCS의 회로는 별도의 바이어스회로가 없이 단지 5개의 트랜지스터와 1개의 저항기만 사용하였다. 시뮬레이션 결과 제안한 VCCS는 5V의 공급전압에서 1V에서 4.8V까지의 제어-전압에 대하여 최대 0A에서 300㎃까지의 전류를 출력할 수 있다. 0㎃에서 300㎃의 출력 전류의 최대 선형 오차는 1.4 %이였다.

• 한국항행학회논문지
• /
• 제21권5호
• /
• pp.501-507
• /
• 2017

전자회로에서 부하가 제너다이오드일 경우, 입력전압에 의해 부하의 전류를 제어하고자 할 때 제너다이오드의 항복전압 특성에 따라 제어하고자 하는 출력전류가 변하기 때문에 기존의 전압제어 전류 생성 방법을 적용할 수 없다. 이 논문에서는 입력전압을 이용하여 정격치보다 큰 전류를 제너다이오드에 인가하여 부품의 수명시험을 할 때, 제너다이오드가 경년열화에 의하여 항복전압의 특성이 변하여 부하전압이 달라져도 이에 관계없이 동일한 전류를 낼 수 있는 회로를 개발하였다. 이 방법으로 구성된 회로를 실증하기 위해 각 블럭의 부품 값을 적용하고 시뮬레이션 하여 입력전압으로 출력전류를 선형적으로 제어하는 결과를 확인하였다. 결과에 의하면 우리가 측정하고자 하는 항복전압 이상의 입력전압에 대해서 출력전류가 선형적으로 변하며 제너다이오드의 경년열화에 의한 항복전압의 변화와 관계없이 일정한 전류가 흐르는 것을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제3권4호
• /
• pp.546-551
• /
• 2008

In this paper, a flux-lock type superconducting fault current limiter(SFCL) integrated with a voltage-controlled voltage source inverter(VC-VSI) is proposed. The suggested equipment, which consists of a flux-lock type SFCL and a VCVSI, can perform the fault current limiting operation from the occurrence of a short-circuit. In addition, it can compensate the reactive power that the non-linear load requires and also perform the uninterruptible power supply(UPS) as well as the load voltage stabilization by controlling the amplitude and the phase of the inverter's output voltage. The specification for a test model was determined and its various functions such as the fault current limiting and the power conditioning operations were presented and analyzed via computer simulation. Through the analytical results based on the computer simulation, the validity of the analysis was confirmed and its multi-operation was discussed.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권3호
• /
• pp.127-133
• /
• 2004

This paper presents a prototype of three-phase current source zero voltage soft-switching PWM controlled PFC rectifier with Single Active Auxiliary Resonant Commutated Snubber (ARCS) circuit topology. The proposed three-phase PFC rectifier with sinewave current shaping and unity power factor scheme can operate under a condition of Zero Voltage Soft Switching (ZVS) in the main three phase rectifier circuit and zero current soft switching (ZCS) in auxiliary snubber circuits. The operating principle and steady-state performances of the proposed three-phase current source soft-switching PWM controlled PFC rectifier controlled by the DSP control implementation are evaluated and discussed on the basis of the experimental results of this active rectifier setup.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권5호
• /
• pp.253-257
• /
• 2002

A new Current-Controlled Driving Method that can drive AC PDPs with low voltage and high luminous efficiency for the sustaining period is presented. In this driving method, the voltage source is connected to a storage capacitor and the stored voltage is delivered to the panel through LC resonance. Thus, this driving method can drive the panel with a voltage source as low as about half of the voltage necessary in the conventional driving methods. The discharge current flowing into the AC PDP is limited in this method. Thus, the power consumption for the discharge is reduced and the discharge input power to output luminance efficiency is improved. Experimental results using this driving method showed that we could drive an AC PDP with a voltage source as low as 146V and that high luminous efficiency of 1.33 1m／W can be achieved.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권6호
• /
• pp.292-296
• /
• 2002

A new sustain driving method for the AC PDP is presented. In this driving method, the voltage source is connected to a storage capacitor, this storage capacitor charges an intermediate capacitor through LC resonance, and the panel is charged from the intermediate capacitor indirectly. In this way, the current flowing into the AC PDP when the sustain discharge occurs is reduced because the current is indirectly supplied from a capacitor, a limited source of charge. Thus, the input power to the output luminance efficiency is improved. Since the voltage supplied to the storage capacitor is doubled through LC resonance, this method call drive an AC PDP with a voltage source of about half of the voltage necessary in the conventional driving methods. The experiments showed that this charge-controlled driving method could drive ail AC PDP with a voltage source of as low as 107V. Using a panel of the conventional structure, luminous efficiency of 1.28 lm/W was achieved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2037-2039
• /
• 1997

In this paper, a source current controlled-scope of the Voltage source PWM converter is considered from one-phase equivalent circuit. And for the improvement of transient characteristics the state quantity of bridge current that is returned from it's error is controlled. With the result of that the bridge current is controlled, this state quantity is known that it is a equivalent braking resistor.

• 대한전기학회논문지
• /
• 제41권1호
• /
• pp.32-41
• /
• 1992

This paper presents a comprehensive study on the stability of several control schemes for the induction motor driven by current source inverters. A stator voltage controlled current source inverter drive system without a speed sensor is investigated in order to find appropriate control schemes, which are primarily based on direct or, alternatively, indirect frequency control scheme. It can be seen, especially that an introduction of the indirect frequency control method improves the inherent instability of the current source inverter drive system for the induction motor. The overall control systems with either voltage control loop or current and voltage control loops in addition to each frequency control scheme, are analyzed by utilizing the root locus method and simulated by computer to show the validity of this analysis.

• Nuclear Engineering and Technology
• /
• 제35권3호
• /
• pp.226-233
• /
• 2003

The discharge characteristics of a prototype ion source was investigated, which was developed and upgraded for the NBI (Neutral Beam Injection) heating system of KSTAR (Korea Superconducting Tokamak Advanced Research). The ion source was designed for the arc discharge of magnetic bucket chamber with multi-pole cusp fields. The ion source was discharged by the emission-limited mode with the control of filament heating voltage. The maximum ion density was 4 times larger than the previous discharge controlled by a space-charge-limited mode with fully heated filament. The plasma (ion) density and arc current were proportional to the filament voltage, but the discharge efficiency was inversely proportional to the operating pressure of hydrogen gas. The maximum ion density and arc current were obtained with constant arc voltage ($80{\sim}100V$), as $8{\times}10^{11}cm^{-3}$ and 1200 A, respectively. The estimated maximum beam current was about 35 A, extracted by the accelerating voltage of 80kV.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.395-398
• /
• 2004

High-linearity voltage-controlled current sources (VCCSs) circuits for wide voltage-controlled oscillator and automatic gun control were proposed. The VCCS consists of emitter follower for voltage input, two common-base amplifier which their emitter connected for current output, and current mirror which connected the two amplifier for large output current. The VCCS used only five transistors and a resistor without an extra bias circuit. Simulation results show that the VCCS has current output range from 0mA to 300mA over the control voltage range from 1V to 4.8V at supply voltage 5V. The linearity error of output current has less than $1.4\%$ over the current range from 0A to 300mA.