• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.12-18
• /
• 2004

Transient natures of diesel sprays are often characterized with spray visualization, since it is a non-intrusive and straightforward technique to be applied. However, as injection pressure is increased higher than a thousand bar in a modern direct injection diesel engine, very fine temporal and spatial resolutions in the spray visualization are required while sprays become optically denser. Discussed in this paper are macroscopic and microscopic spray visualization techniques and an example of image processing process for efficient and consistent measurement of spray parameters. The injection rate measurement method based on hydraulic pulse principle was suggested as a way of estimating injection velocity for transient diesel sprays. The spray visualization and injection rate measurement techniques were applied to analyze transient diesel sprays from a common-rail injection system and found to be practically effective.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.1982-1988
• /
• 2002

Micro-injection molding and microfluidic devices with the help of MEMS technologies including the LIGA process are expected to play important roles in micro-system industries, in particular the bio-application industry, in the near future. Understanding fluid flows in micro-channels is important since micro-channels are typical geometry in various microfluidic devices and mold inserts for micro-injection molding. In the present study, Part 1, an experimental investigation has been carried out to understand the detailed flow phenomena in micro-channel filling process. Three sets of micro-channels of different thickness (40um,30um and 2011m) were fabricated using SU-8 on silicon wafer substrate. And a flow visualization system was developed to observe the filling flow into the micro-channels. Experimental flow observations are extensively made to find the effects of pressure, inertia force, viscous force and surface tension. A dimensional analysis for experimental results was carried out and several relationships A dimensionless parameters are obtained.

• 한국멀티미디어학회논문지
• /
• 제12권1호
• /
• pp.139-146
• /
• 2009

본 연구는 정보 간의 관계에서 도출되는 특징을 적합하게 보여줄 수 있는 시각화를 위한 연구이다. 정보의 관계에 주목하는 이유는 관계 구조를 통해 정보의 성격과 특징을 파악할 수 있기 때문이며 이러한 정보의 관계는 사회연결망 분석을 통해서 파악할 수 있다. 이 연구에서는 사회연결망분석에서 관계의 성격을 도출하는데 중요한 지표로 다뤄지는 영향력의 시각화를 연구범위로 설정하고 첫째, 연결망 내에서 관계를 나타내는 요소와 영향력을 나타내는 지표를 분류하여 정리하였다. 둘째, 사회연결망에서 영향력을 나타내는 관계의 요소들 간의 연관을 살펴 영향력 시각화의 네트워크를 만들었다. 셋째, 사회연결망 분석과 시각화 프로세스와의 상호작용을 설명하는 영향력 시각화의 프레임워크를 제안하였다. 본 연구에서 제안하는 영향력 시각화의 네트워크와 프레임워크는 사회연결망의 영향력 요소를 이해하고, 분석하는데 유용하게 사용될 수 있을 뿐만 아니라 연결망의 시각화에 있어 합리적이고 효율적인 접근을 가능하게 함으로써 정보디자인에 있어 새로운 방법적 접근이 되리라고 기대한다.

• 산경연구논집
• /
• 제11권7호
• /
• pp.41-49
• /
• 2020

Purpose: The purpose of this study is to recognize the role and necessity of public data visualization through prior research, investigation, and data verification processes. In addition, this study intends to check what factors should be considered in order to visualize data on the mobile web. Through this process, by identifying the cognitive load affecting information visualization by type, as a result, I would like to propose an effective information visualization method to effectively deliver public data related to government policies. Research design, data and methodology: In this study, we analyzed the case of information visualization according to infographics, which has been widely used in the public field among various visualization methods. For this study, a questionnaire survey was conducted for young people in their 20s and 30s with the highest mobile usage rate. Results: Based on the results, IPA (Importance Performance Analysis) was performed to conduct cognitive load test tools for information visualization of public data and confirmed the implications for each type of infographics. Conclusions: As a result of research, in order to efficiently deliver public data on the mobile web, first, it is necessary to construct a visual screen that can be easily identified through clear data. Appropriate graphic elements can be used according to the type to make it easier for users to acquire and understand information. Second, it is necessary to provide useful content in visualizing information. Third, in order to efficiently transmit information and increase understanding of data, it is necessary to visualize information that can induce interest in data and form metaphors. Fourth, it is necessary to visualize information to reduce cognitive load in terms of physical and mental aspects in order to accommodate users' comfortable information. Fifth, in order to effectively deliver public data, it is necessary to compose contents and information that are easy for users to understand. This study examines effective information visualization methods to increase the communication effect of public data in response to changes in the data-based intelligent information society and suggests implications for each type considering cognitive loads to help future public institutions to communicate and accept information.

• 한국초등수학교육학회지
• /
• 제17권2호
• /
• pp.351-370
• /
• 2013

본 연구는 초등학교 6학년 영재학급 학생들이 정다면체 및 삼각다면체의 쌍대 관계를 탐구하면서 입체도형의 구성 요소를 통해 쌍대 관계를 어떻게 인식하고 이미지화하여, 결과적으로는 어떤 시각화 방법을 사용하는지 분석하는데 목적이 있다. 이를 위해 인천과 서울지역에 거주하는 총 4개 학급 60명의 학생들이 대상으로 학습지를 분석하였으며, 이들 중 소속 학급 내 성취 수준이 중상 이상인 12명의 학생들을 대상으로 관찰 및 면담을 통해 사고 과정을 보다 상세히 분석하였다. 다면체의 쌍대 관계를 탐구하는 과정에 필요한 구성요소에는 면, 꼭짓점, 모서리의 개수라는 일차적인 요소가 존재하고 한 면에 모인 꼭짓점의 수, 한 꼭짓점에 모인 면의 수라는 이차적인 요소가 존재한다. 일반적인 학생들은 구성 요소들의 개수에 집중하여 유사점 구별이라는 방법을 주로 사용하는데, 이 경우 정다면체의 쌍대관계는 쉽게 인식하였다. 하지만 삼각다면체의 쌍대관계까지 인식해 낸 학생들의 경우는 한 단계 더 나아가서 입체의 이미지를 떠올리며 유사점이 과연 공간에서 어떤 형태로 나타나는지를 확인해 본 결과 공간으로 전환되는 사고는 (대상 회전), (보조선 그리기), (입체도형 일부 만들기), (입체도형 안에 입체도형 만들기)의 형태로 나타나서 시각화하게 됨을 확인하였다.

• 한국디지털건축인테리어학회논문집
• /
• 제13권3호
• /
• pp.33-40
• /
• 2013

The purpose of this study is to propose an curriculum for architectural studio in university to implement BIM process, through the analysis of the advantages of the BIM tool. The limitation of this study was to analyze the case study of only half year a single university. University education in the design process, the design that can be used in applying BIM content should be universal, university education considering the special working conditions, excessive BIM-based application can be difficult. Therefore, a systematic and reliable design that can be applied to education applies BIM design process is necessary to establish. University education applying BIM design review and design proposal the various 3D visualization can be used effectively to determine. In addition, the planned representation for thinking about and drawing 3D model building, architectural space can be used for visualization, and other subjects in conjunction with structural analysis, environmental analysis, facility layout, etc. can be used.

• 한국가시화정보학회지
• /
• 제1권2호
• /
• pp.52-57
• /
• 2003

The present paper investigated the effect of ultrasonic vibrations on the melting process of a phase-change material (PCM). The melting process in the square cavity with a heated vertical wall has been studied in terms of acoustic streaming. In the present study, applying with ultrasonic vibrations to the liquid were found to induce acoustic streaming which was clearly observed using by a particle image velocimetry (PIV) and a thermal infrared camera. The experimental results revealed that acoustic streaming could accelerate the melting process as much as 2.5 times, compared to the rate of natural melting (i. e., the melting without acoustic streaming). In addition, temperature and Nusselt numbers over time provided conclusive evidence of the important role of the acoustic streaming on the melting phenomena of the PCM.

• 한국멀티미디어학회논문지
• /
• 제8권7호
• /
• pp.1000-1011
• /
• 2005

본 논문에서는 통계에 대한 지식이 부족한 임상 의학자들이 보다 쉽고 정확하게 데이터를 분석할 수 있도록 표본 데이터의 분포에 따라 적절한 분석 방법을 제시해주고, 분석 과정을 아이콘들의 트리로 구성한 가이드맵을 제공하는 의료 통계분석 시스템을 개발하였다. 개 발 시스템은 일반적으로 활용되는 통계 방법, 반복측정자료에 활용되는 통계 방법, 생존분석 등 의료 분야에서 자주 사용되는 분석법들을 포함하고 있다. 또한 3차원 글리프를 이용하여 결과를 인터랙티브하게 보여주고, 불확실성을 시각화함으로써 분석된 결과를 더욱 쉽게 이해할 수 있도록 하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.195-196
• /
• 2006

Recently, there are increasing need to make a synthetic assessment about oceanic data which is collected over the various scientific field, in addition to just gathering oceanic data. In this study, we made a basic map using satellite image, aerial photo, multi-beam data, geological stratum data etc. And as well we are producing comprehensive SVT(Scientific Visualization Toolkit) which can visualize various kinds of oceanic data. These oceanic data include both survey data such as tidal height, tide, current, wave, water temperature, salinity, oceanic weather data and numeric modelling results such as ocean hydrodynamic model, wave model, erosion/sediment model, thermal discharged coastal water model, ocean water quality model. In this process, we introduce GIS(Geographic Information System) concepts to reflect time and spatial characteristics of oceanic data.

• Journal of Information Processing Systems
• /
• 제6권1호
• /
• pp.33-42
• /
• 2010

GIS can only be applied to certain areas by storing format. It is subordinate to a system when displaying geographic information data. It is therefore inevitable for GIS to use GML that supports efficient usage of various geographic information data and interoperability for integration and sharing. The paper constructs VisualGML that translates currently-used geographic information such as DXF (Drawing Exchange Format), DWG (DraWinG), or SHP (Shapefile) into GML format for visualization. VisualGML constructs an integrated map pre-process module, which filters geographic information data according to its tag and properties, to provide the flexibility of a mobile device. VisualGML also provides two major GIS services for the user and administrator. It can enable visualizing location search. This is applied with a 3-Layer POI structure for the user. It has trace monitoring visualization through moving information of mobile devices for the administrator.