• 공학교육연구
• /
• 제8권3호
• /
• pp.49-56
• /
• 2005

이 연구는 공학설계능력의 평가를 위한 공학설계능력의 평가 요소를 추출하고 추출된 공학설계능력 평가 요소에 대한 타당도. $\cdot$ 사회적 능력 : 의사소통, 팀웍 $\cdot$ 절차적 능력 : 문제확인 및 정의 검증을 목적으로 하고 있다. 일차적으로 문헌분석과 연구진 자체 검토를 통하여 공학설계능력의 평가 요소를 추출하고 전문가 집단을 통하여 내용타당도를 검증하였다. 그 결과로 제시된 평가 영역과 평가 요소는 다음과 같다하기, 계획 및 관리하기, 정보 수집하기, 아이디어 도출하기, 아이디어 평가하기 $\cdot$ 경험 : 공학적 경험, 과학적 경험 $\cdot$ 지식 : 공학적 지식, 과학적 지식, 수학적 지식 $\cdot$ 시각화 능력 : 스케치, 제도 $\cdot$ 사고력 : 수렴적 사고, 귀납적 사고, 직관적 사고

• 정보교육학회논문지
• /
• 제26권4호
• /
• pp.285-293
• /
• 2022

예상보다 길어진 코로나19 사태는 학생들의 수학 교과 기초학력에 적지 않은 손상을 끼쳤다. 본 논문에서는 학생들의 기초 곱셈 연산 능력 개선에 도움을 줄 수 있는 곱셈구구 연습 애플리케이션을 클라우드에 기반하여 개발하였으며, 학생 개별 맞춤형 지도를 위해 데이터 시각화 기술을 접목시켜 교사의 피드백을 돕고자 하였다. 구글에서 개발한 Flutter framework, Google Cloud, Google Sheets를 통합적으로 활용하여 애플리케이션의 성능을 높였다. K광역시 소재 초등학교 6학년 72명의 학생들이 본 애플리케이션을 일주일간 곱셈구구 활동에 활용한 결과, 학생들의 곱셈구구 소요 시간이 초기에 비해 28%이상 감소한 가운데, 학생들의 학습 데이터가 오류없이 정교하게 수집된 것을 확인할 수 있었다. 본 연구에서 Flutter framework를 통해 진행한 개발 사례가 다른 교육용 학습 애플리케이션 개발로 이어질 수 있기를 희망한다.

• Nuclear Engineering and Technology
• /
• 제38권5호
• /
• pp.449-454
• /
• 2006

Neutron imaging technique was used to investigate the water distribution and movement in Polymer Electrolyte Membrane Fuel Cell (PEMFC) at HANARO, KAERI. The Feasibility tests were performed in the first and second exposure rooms at the neutron radiography facility (NRF) at HANARO in order to check the ability of each exposure room, respectively. The feasibility test apparatus was composed of water and pressurized air before making up the actual test apparatus. Due to the low neutron intensity in the second exposure room, the exposure time was too long to investigate the transient phenomena of PEMFC. Although the exposure time was improved to 0.1 sec in the first exposure room, it was difficult to discriminate detail water movement at the channel due to the high noise level. Therefore, the experimental setup must be optimized according to the test conditions. Water discharge characteristics were investigated under different flow field geometries by using feasibility test apparatus and the neutron imaging technique. The water discharge characteristics of a 3-parallel serpentine are superior to those of a 1-parallel serpentine, but water at Membrane Electrode Assembly (MEA) was not removed, regardless of the flow field type.

• 한국가시화정보학회지
• /
• 제14권1호
• /
• pp.40-45
• /
• 2016

Elimination of the smear layer and bacteria in the root canal is the most important in the endodontic treatment, and various irrigation devices have been developed. Nevertheless, it is hard to eliminate the smear layer and bacteria completely. In this paper, a micro bubble irrigation system has been developed for the root canal cleaning of tooth. Micro bubbles are generated when pressurized fluids passing through a porous material inside a hand-piece nozzle, and the bubbly flows excited by ultrasonic vibration are observed using a high-speed camera and a microscope. The results show that the diameter and number of bubbles increases with the applied pressure, and there found an optimum excitation frequency in order to minimize the bubble size. From in-vitro tests, it is also verified that the developed bubble irrigation system has the ability of antibacterial and infection removal. Thus, this biocompatible system would be well suited for root canal cleaning.

• 한국가시화정보학회지
• /
• 제10권2호
• /
• pp.20-24
• /
• 2012

Increasing the active catalyst surface area is important in improving a converter's efficiency. In addition, uniform flow is advantageous in that it produces more efficient catalytic conversion. This results in the ability to use a smaller catalytic converter with uniform flow as opposed to a larger converter requirement for non-uniform flow. Therefore, it is important to characterize the internal flow of the catalytic converter. To characterize the system's flow patterns, velocity measurements were taken at the mid and exit planes of a ceramic honeycomb catalytic converter at flow rates of 37.8 l/s and 94.4 l/s. Measurements were conducted using LDV. The profiles were measured along both the major and minor axis of the planes. Primary flow direction velocities measured along the minor axis, at both flow rates, varied greatly at the mid plane and somewhat at the exit plane. The areas of greatest air flow were seen near the edges of the walls and on the side of the converter opposite the flow's entrance region. It also appears that the high velocities opposite the intake are due to the design of the entrance region. The entrance region is possibly too small to properly redirect the vertically entering fluid into an evenly distributed flow in the primary flow direction.

• 정보처리학회논문지B
• /
• 제12B권5호
• /
• pp.535-542
• /
• 2005

증강 협업 환경은 지리적으로 떨어진 그룹과 그룹간의 사용자들이 함께 어려운 문제를 풀 수 있도록 도와주는 다수의 디스플레이를 활용하는 작업 환경이다. 본 논문은 실시간 협력 작업 환경의 특징적인 공유 작업 공간 모델을 살펴본다 그리고 과학적 가시화를 위한 증강 협업 환경의 공유 작업 공간 모델을 검증하는 반복적인 디자인 실험연구를 설명하고 있다 이 연구에서 원거리 사용자들의 협업을 향상시키기 위한 증강 협업 환경의 디스플레이 기술 설정을 바꿔가며 사용자 평가 실험이 진행되었다. 각 실험에서 두 개의 방에 두 명씩 분산된 그룹들에게 협업 가시화를 이용한 집중적인 분석 작업을 시켰다. 그 결과 다른 사람들의 작업 내용을 쉽게 볼 수 있는 고화질 작업환경의 항시 가시성이 분산된 구성원들 간의 상호 인지도와 협력에 도움이 되어 협업 능률을 향상시켰다.

• 한국가시화정보학회지
• /
• 제16권2호
• /
• pp.16-22
• /
• 2018

This study investigates dynamic wetting behaviors of a water droplet placed on surfaces with different wettability and nano-structures. Hydrophobic and hydrophilic properties on as-received silicon wafers were prepared by fabricating thin films of hydrophobic polymer and hydrophilic nanoparticles via layer-by-layer coating. Dynamic advancing contact angle of droplets on the prepared surfaces was measured at various moving velocities of triple contact line with a high-speed video camera. As advancing velocity of triple contact line increased, dynamic advancing contact angle on the as-received silicon and hydrophobic surfaces sharply increased up to $80^{\circ}$ in the range of order of mm/sec whereas the SiO2 nanoparticle-coated hydrophilic surface maintained low contact angles of about $30^{\circ}$ and then it gradually increased in the velocity range of order of hundred mm/sec. The improved dynamic wetting ability observed on the nanostructured hydrophilic surface can benefit the performance of various phase-change heat transfer phenomena under forced convective flow.

• 한국지리정보학회지
• /
• 제14권3호
• /
• pp.96-109
• /
• 2011

최근 정보통신기술의 발전과 더불어 geographic information system(GIS)의 사용이 점차 일반화되고 그 응용분야와 활용범위가 확대되고 있다. 특히, 지리정보 관찰과 학습에서도 GIS의 활용은 긍정적인 효과가 기대되며, 2차원 시각 교보재인 사진이나 영상물에 비해 보다 사실적으로 지리적 특성을 파악하는데 도움이 될 것이다. 다소 복잡한 지형정보의 효과적인 시각화는 학습자로 하여금 지리정보 이해를 도울 뿐만 아니라, 지리적 정보를 파악하고 분석하는 능력을 키울 수 있다. 본 논문에서는 지리 학습에서 활용할 수 있는 학습보조자료 개발을 목표로 증강현실기술을 이용한 다양한 지형정보 가시화 기법과 사례를 연구하였다. 더불어 증강현실기반의 지리 학습을 위해, 기존에 구축된 GIS 데이터의 가공과정과 가공사례를 소개함으로써 3차원 지리정보의 효과적 가시화를 위해 증강현실 기술을 적용할 가치가 있음을 나타내었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.153-158
• /
• 1998

Since the mid-1990′s, researches on 3D GIS have been regarded as one of main issues both in the academic sites and commercial vendors; recently, some prototyped systems or the first versioned software systems of commercial basis are being reported and released. Unlike conventional 2D GIS, which consists in intelligent structured GIS or desktop GIS, every 3D GIS has its own distinguished features according to data structure-supporting capability, GIS-styled functionality, external database accessibility, interfacing extents with 2D GIS, 3D visualization/texture mapping ability, and so forth. In this study, technical aspects related to system development, SERI-Web3D GIS ver. 1.2, are explained. Main features in this revised 3D GIS can be summarized: 2-tier system model(client-server), VGFF(Virtual GIS File Format), internal GIS import, Feature manager(zoning, layering, visualization evironment), Scene manager(manage 3D geographic world), Scene editor, Spatial analyzer(Intersect, Buffering, Network analysis), VRML exporter. While, most other 3D GISes or cartographic mapping systems may be categorized into 3D visualization systems handling terrain height-field processing, 2D GIS extension modules, or 3D geometric feature generation system using orthophoto image: actually, these are eventually considered as several parts of "real 3D GIS". As well as these things, other components, especially web-based 3D GIS, are being implemented in this study: Surface/feature integration, Java/VRML linkage, Mesh/Grid problem, LOD(Level of Detail)/Tiling, Public access security problem, 3-tier architecture extension, Surface handling strategy for VRML.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권3호
• /
• pp.178-192
• /
• 2021

File system forensics typically focus on the contents or timestamps of a file, and it is common to work around file/directory centers. But to recover a deleted file on the disk or use a carving technique to find and connect partial missing content, the evidence must be analyzed using cluster-centered analysis. Forensics tools such as EnCase, TSK, and X-ways, provide a basic ability to get information about disk clusters, but these are not the core functions of the tools. Alternatively, Sysinternals' DiskView tool provides a more intuitive visualization function, which makes it easier to obtain information around disk clusters. In addition, most current tools are for Windows. There are very few forensic analysis tools for MacOS, and furthermore, cluster analysis tools are very rare. In this paper, we developed a tool named FACT (Forensic Analyzer based Cluster Information Tool) for analyzing the state of clusters in a HFS+ file system, for digital forensics. The FACT consists of three features, a Cluster based analysis, B-tree based analysis, and Directory based analysis. The Cluster based analysis is the main feature, and was basically developed for cluster analysis. The FACT tool's cluster visualization feature plays a central role. The FACT tool was programmed in two programming languages, C/C++ and Python. The core part for analyzing the HFS+ filesystem was programmed in C/C++ and the visualization part is implemented using the Python Tkinter library. The features in this study will evolve into key forensics tools for use in MacOS, and by providing additional GUI capabilities can be very important for cluster-centric forensics analysis.