• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.521-524
• /
• 2023

본 연구에서는 AI 인공지능을 활용한 통일신라 석탑 '경주 불국사 삼층석탑' 복원을 위해 석탑 3D모델링 과정에 대한 연구를 수행하였다. 산성비로 부식되어 갈라진 더 이상 원본의 형태를 알아 볼 수 없는 현재 통일신라 석탑 형태를 3D모델링 작업을 통하여 AI로 하여금 원활한 교육이 실시 되도록 하는 것을 목표로한다. 본래 제작 되어있는 3D 모델링은 많은 버텍스와 페이스로 학습 데이터가 많아 실제 활용하기에 어려움을 가지고 있다. 때문에 적은 양의 버텍스와 페이스로 새로운 3D 모델링 제작에 대한 필요성에 대해 확인하였다. 본 연구는 그에 필요한 석탑 모델링 과정에 대해 서술한다. 이를 위해 본 논문은 석탑에 대한 구조를 살피고 모델링에 활용된 프로그램의 장단점과 분석을 도출하였다. 본 연구를 통해 석탑 복원에 필요한 3D모델링 프로그램 활용의 전망과 더불어 인공지능 AI의 한계점을 3D 모델링의 정확도와 세밀함을 통하여 타파하고자 하였다.

• Journal of Broadcast Engineering
• /
• v.17 no.3
• /
• pp.519-528
• /
• 2012

Voice activity detection (VAD) is generally conducted by extracting features from the acoustic signal and a decision rule. The performance of such VAD algorithms driven by the input acoustic signal highly depends on the acoustic noise. When video signals are available as well, the performance of VAD can be enhanced by using the visual information which is not affected by the acoustic noise. Previous visual VAD algorithms usually use single visual feature to detect the lip activity, such as active appearance models, optical flow or intensity variation. Based on the analysis of the weakness of each feature, we propose to combine intensity change measure and the optical flow in the mouth region, which can compensate for each other's weakness. In order to minimize the computational complexity, we develop simple measures that avoid statistical estimation or modeling. Specifically, the optical flow is the averaged motion vector of some grid regions and the intensity variation is detected by simple thresholding. To extract the mouth region, we propose a simple algorithm which first detects two eyes and uses the profile of intensity to detect the center of mouth. Experiments show that the proposed combination of two simple measures show higher detection rates for the given false positive rate than the methods that use a single feature.

• Journal of The Korean Association For Science Education
• /
• v.37 no.5
• /
• pp.859-877
• /
• 2017

The purpose of this study is to probe secondary science teachers' perception on scientific models and modeling. A total of 50 experienced science teachers were surveyed with 10 open-ended questions about several aspects of models and modeling: definition, examples, purpose, multiplicity, changeability, design/construction, evaluation and beliefs in the use of models and modeling as a teaching tool. The analysis of the data shows the following results: 1) understanding of models and modeling held by a majority of experienced secondary science teachers was far from that of experts as they concentrated on a model's superficial, representative, and visual functions, 2) when it comes to their view toward the use of a model, a model does not remain in the stage of 'doing science' but in the stage of being a subsidiary teaching tool for the teacher's explaining and the students' understanding of scientific concepts, 3) the subjects they majored in made meaningful differences in their contextual understanding of models and modeling, 4) though most of the teachers acknowledged the importance of teaching about models and modeling, even a lot of them showed a negative position toward the opinion that they are willing to apply modeling to their classes. Implications of the results were discussed in terms of intervention in order to enhance secondary science teachers' understanding and pedagogical content knowledge of models and modeling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.147-154
• /
• 2018

This paper focuses on the development of a support system that can rapidly generate the design data of a hot-form die with cooling channels, commonly known as hot stamping technology. We propose a new process for designing hot-form dies based on our (automated) system, whose main features are derived from the analysis of the design requirements and design process in the current industry. Our design support system consists of two modules, which allow for the generation of a 3D geometry model and its 2D drawings. The module for 3D modeling automation is implemented as a type of CATIA template model based on CATIA V5 Knowledgeware. This module automatically creates a 3D model of a hot-form die, including the cooling channels, that depends on the shape of the forming surface and the number of STEELs (subsets of die product) and cooling channels. It also allows for both the editing of the positions and orientations of the cooling channels and testing for the purpose of satisfying the constraints on the distance between the forming surface and cooling channels. Another module for the auto-generation of the 2D drawings is being developed as a plug-in using CAA (CATIA SDK) and Visual C++. Our system was evaluated using the S/W test based on a user defined scenario. As a result, it was shown that it can generate a 3D model of a hot form die and its 2D drawings with hole tables about 29 times faster than the conventional manual method without any design errors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.869-875
• /
• 2019

The service level of the roundabout is estimated through an analytic model using the geometrical characteristics and parameter values obtained from the observations. Although a lot of researches have been conducted on the rotational intersection through an analytical model, the case of variable combinations is enormous, suggesting the range and service level of appropriate traffic volume according to the case study or limited characteristics through simulation. Therefore, in this study, the roundabout analysis model was constructed by using Visual Basic Application to make variable adjustment more easily. The constructed model analyzes traffic conditions according to various situations and analyzes the characteristics of roundabouts. As the result of analysis, the more the ratio of left turn and U-turn, the more the traffic distribution of each approached road was biased to one side, the limit traffic volume of the roundabout decreased and congestion appeared quickly. In particular, the more uneven the distribution of traffic was, the less the Saturation traffic volume was affected by the turnover rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3859-3865
• /
• 2010

Modeling a virtual reader and tags, the emulator system is realized by using a commercial signal generation device to make signal, a data collection equipment, and DSP board. By using a Virtual UHF RFID (860 ~ 960 [MHz]) reader/tags module, a developed RFID reader, protocol of tag, and properties of RF support to provide the way how to verify the suitability to international standards (ISO 18000-6 Type C, EPCglobal C1G2). In this paper, to implement a proposed model reader and tag model, Visual DSP is applied by using DSP board, composing the system's signal generators, signal analyzers and performance verification, the target readers or tags, RFID emulator control computesr and control programs.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.2
• /
• pp.437-447
• /
• 2018

Virtual Reality (VR) is becoming a new standard in the game industry. PokeMon GO is a representative example of VR technology. The day after the launch of PokeMon Go in the U.S, It has achieved the highest number of iOS App Store downloads. This is an example of the power of VR. VR comprises gyroscopes, acceleration, tactile sensors, and so on. This allow users could be immersed in the game. As new technologies emerge, new and different threats are created. So we need to research the security of VR technology and game system. In this paper, we conduct a threat analysis for information assurance of VR device (Oculus Rift) and game system (Quake). We systematically analyze the threats (STRIDE, attack library, and attack tree). We propose security measures through DREAD. In addition, we use Visual Code Grepper (VCG) tool to find out logic errors and vulnerable functions in source code, and propose a method to solve them.

• The KIPS Transactions:PartA
• /
• v.11A no.4
• /
• pp.267-276
• /
• 2004

The modeling methods of routing region used in the automatic placement/routing system are a grid and non-grid. Because the gird method is curbed by its size and a board if the electrical and physical elements on PCB are of small quantity, it has many memories. Therefore, it has demerit which decreases the speed of automatic placement/routing. The Shape-based type, non-grid method, makes the shapes exist as an in dividual element in a memory by using a region-processing method. Each individual element needs very small memory since it has its unique data size. Therefore, this paper aimed to develope the automatic placement/routing system which can automatically place and route the PCB without dissipation of memory at a high speed. To this aim, the auction algorithm method was applied which can make the memories be most rapidly reached from the original point to various destinations. Also, this system was developed by the Visual C++ in the Widows environment of IBM Pentium computer in order to use it in an individual PC system.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.11
• /
• pp.801-808
• /
• 2013

In the virtual space with the interactive 3D contents, the degree of mental satisfaction is determined by how fully it reflect the real world. There are a few factors for getting the high completeness of virtual space. The first is the modeling technique with high-polygons and high-resolution textures which can heighten an visual effect. The second is the functionality. It is about how realistic represents dynamic actions between the virtual space and the user or the system. Although the studies on the techniques for animating and controlling the virtual characters have been continued, there are problems such that the long production time, the high cost, and the animation without expected behaviors. This paper suggest a method of behavior control of animation by designing the optimized skeleton which produces the movement of character and applying the procedural technique using physical law and mathematical analysis. The proposed method is free from the constraint on one-to-one correspondence rules, and reduce the production time by controlling the simple parameters, and to increase the degree of visual satisfaction.

• The Journal of Engineering Geology
• /
• v.14 no.3 s.40
• /
• pp.287-300
• /
• 2004

By using a simple conceptual model, a sensitivity analysis is performed to examine the effects of changing model parameters on the model outputs, the groundwater discharge and the radius of influence, induced by tunnel construction. The results indicate that the model outputs are most sensitive to the tunnel depth and the hydraulic conductivity, and their sensitivities vary with time. It is also revealed that the sensitivity of the specific yield in- creases constantly with time, and therefore it is as important as the hydraulic conductivity for constructing a wet-system tunnel. A transient model is suggested to simulate the stepwise tunnel excavation and the watertight lining. The model is used for a tunnel construction site to predict groundwater mow into the tunnel and the transient response of the surrounding aquifer system. The predicted results are highly sensitive to the hydraulic conductivites assigned by model calibration. Thus, a postaudit should be made to reduce the uncertainty of the predictive model.