• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.773-782
• /
• 2022

Estimation of cable tension through proper measurements is one of the essential tasks in evaluating the safety of cable structures. In this paper, a study on cable tension estimation using the built-in accelerometer and camera in a smartphone was conducted. For the experimental study, visual displacement measurement using a smartphone camera and acceleration measurement using a built-in accelerometer were performed in the cable-stayed bridge model. The estimated natural frequencies and transformed tensions from these measurements were compared with the theoretical values and results from the normal visual displacement method. Through comparison, it can be seen that the error between the method using the smartphone and the normal visual displacement is sufficiently small to be acceptable. It has also been shown that those errors are much smaller than the difference between the values calculated by the theoretical model. These results show that the deviation according to the type of measurement method is not large and it is rather important to use an appropriate mathematical model. In conclusion, in the case of cable tension estimation, it can be said that the visual displacement measurement and acceleration using a smartphone can be a sufficiently applicable method, just like the normal visual displacement method. It is also noteworthy that the smartphone accelerometer has a larger magnitude error and has more limitations such as high-frequency sampling instability compared to the visual displacement method, but shows almost the same performance as the visual displacement method in this cable tension estimation.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.53-58
• /
• 2017

Recently, advance in technology have increased the importance of visual inspection in semiconductor inspection areas. In PCB visual inspection, accurate line estimation is critical to the accuracy of the entire process, since it is utilized in preprocessing steps such as calibration and alignment. We propose a line estimation method that is differently weighted for the line candidates using a histogram of gradient information, when the position of the initial approximate corner points is known. Using the obtained line equation of the outline, corner points can be calculated accurately. The proposed method is compared with the existing method in terms of the accuracy of the detected corner points. The proposed method accurately detects corner points even when the existing method fails. For high-resolution frames of 3.5mega-pixels, the proposed method is performed in 89.01ms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1069-1076
• /
• 2016

Recent development in visual sensor technologies has encouraged various researches on adding imaging capabilities to sensor networks. Video data are bigger than other sensor data, so it is essential to manage the amount of image data efficiently. In this paper, a new method of video traffic estimation is proposed for efficient traffic management of visual sensor networks. In the proposed method, a first order autoregressive model is used for modeling the traffic with the consideration of the characteristics of video traffics acquired from visual sensors, and a Kalman filter algorithm is used to estimate the amount of video traffics. The proposed method is computationally simple, so it is proper to be applied to sensor nodes. It is shown by experimental results that the proposed method is simple but estimate the video traffics exactly by less than 1% of the average.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.19 no.1
• /
• pp.65-71
• /
• 2024

An indirect visual SLAM takes raw image data and exploits geometric information such as key-points and line edges. Due to various environmental changes, SLAM performance may decrease. The main problem is caused by dynamic objects especially in highly crowded environments. In this paper, we propose a robust feature-based visual SLAM, building on ORB-SLAM, via multi-channel dynamic objects estimation. An optical flow and deep learning-based object detection algorithm each estimate different types of dynamic object information. Proposed method incorporates two dynamic object information and creates multi-channel dynamic masks. In this method, information on actually moving dynamic objects and potential dynamic objects can be obtained. Finally, dynamic objects included in the masks are removed in feature extraction part. As a results, proposed method can obtain more precise camera poses. The superiority of our ORB-SLAM was verified to compared with conventional ORB-SLAM by the experiment using KITTI odometry dataset.

• Analytical Science and Technology
• /
• v.27 no.3
• /
• pp.153-160
• /
• 2014

While variety of cases of studies about asbestos analysis methods are released internationally, the results of Asbestos Containing Materials (ACM) according to differences in the method of the analysis is becoming an issue. In this study, homogeneity ensured ACM samples were analyzed by visual estimation method and point counting method, and the result cound be used not only to improve the reliability on asbestos analysis of the institutions and analysts but also to obtain the basic data of Polarizing Light Microscope (PLM) analysis by comparing and evaluating. Asbestos analysis were divided into qualitative and quantitative analysis method. The quantitative analysis was performed by visual estimation method and point counting method (total 400 points) of EPA 600-R-93-116 method by using PLM. Firstly, The following was the result of homogeneity of the samples by ANOVA (Analysis of variance) and the results were satisfied. The results of qualitative analysis showed that the samples were chrysotile and amosite, and about the results of quantitative analysis, asbestos concentration determined by point counting method tend to be lower than concentrations determined by visual estimation method and also, pont counting method was a little more complicated and time-consuming.

• Journal of the Korean housing association
• /
• v.15 no.4
• /
• pp.17-23
• /
• 2004

The purpose of this study is to grasp visual effects of landscape on window in living space. The visual effects in the 1/3 living room scale models that are different in the dimension of window, the place of window and the landscape through the window is judge using a method of magnitude estimation. In consequence of these experiment, the following results were obtained. 1) The brightness influences the evaluation marks on visual effects of window on living space. 2) The existence of landscape has an effect on a sense of extent for living space. 3) The existence of window in visual field makes a great difference to the visual effects.

• The Journal of Korea Robotics Society
• /
• v.11 no.1
• /
• pp.33-40
• /
• 2016

In this paper, we propose a method for estimating the pose of the camera using a rectangle feature utilized for the visual SLAM. A warped rectangle feature as a quadrilateral in the image by the perspective transformation is reconstructed by the Coupled Line Camera algorithm. In order to fully reconstruct a rectangle in the real world coordinate, the distance between the features and the camera is needed. The distance in the real world coordinate can be measured by using a stereo camera. Using properties of the line camera, the physical size of the rectangle feature can be induced from the distance. The correspondence between the quadrilateral in the image and the rectangle in the real world coordinate can restore the relative pose between the camera and the feature through obtaining the homography. In order to evaluate the performance, we analyzed the result of proposed method with its reference pose in Gazebo robot simulator.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.81-89
• /
• 2013

Many of the current visual odometry algorithms suffer from some extreme limitations such as requiring a high amount of computation time, complex algorithms, and not working in urban environments. In this paper, we present an approach that can solve all the above problems using a single camera. Using a planar motion assumption and Ackermann's principle of motion, we construct the vehicle's motion model as a circular planar motion (2DOF). Then, we adopt a 1-point method to improve the Ransac algorithm and the relative motion estimation. In the Ransac algorithm, we use a 1-point method to generate the hypothesis and then adopt the Levenberg-Marquardt method to minimize the geometric error function and verify inliers. In motion estimation, we combine the 1-point method with a simple least-square minimization solution to handle cases in which only a few feature points are present. The 1-point method is the key to speed up our visual odometry application to real-time systems. Finally, a Bundle Adjustment algorithm is adopted to refine the pose estimation. The results on real datasets in urban dynamic environments demonstrate the effectiveness of our proposed algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.945-949
• /
• 2009

This paper proposes an enhanced motion estimation that is one of core parts affecting the coding performance and visual quality in video coding. Although the full search technique, which is the most basic method of the motion estimation, presents the best visual quality, its computational complexity is great, since the search procedures to find the best matched block with each block in the current frame are carried out for all points inside the search area. Thus, various fast algorithms to reduce the computational complexity and maintain good visual quality have been proposed. The PMVFAST adopted the MPEG-4 visual standard produces the visual quality near that by the full search technique with the reduced computational complexity. In this paper, we propose a new motion vector prediction method using median processing. The proposed method reduces the computational complexity for the motion estimation significantly. Experimental results show that the proposed algorithm is faster than the PMVFAST and better than the full search in terms of search speed and average PSNR, respectively.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.21-29
• /
• 2020

This paper presents an effective single image haze removal using edge-preserving and adaptive transmission estimation to enhance the visibility of outdoor images vulnerable to weather and environmental conditions with computational complexity reduction. The conventional methods involve the time-consuming refinement process. The proposed transmission estimation however does not require the refinement, since it preserves the edges effectively, which selects one between the pixel-based dark channel and the patch-based dark channel in the vicinity of edges. Moreover, we propose an adaptive transmission estimation to improve the visual quality particularly in bright areas like sky. Experimental results with various hazy images represent that the proposed method is superior to the conventional methods in both subjective visual quality and computational complexity. The proposed method can be adopted to compose a haze removal module for realtime devices such as mobile devices, digital cameras, autonomous vehicles, and so on as well as PCs that have enough processing resources.