• Structural Engineering and Mechanics
• /
• 제71권5호
• /
• pp.485-502
• /
• 2019

In this research, the nonlinear static, buckling and vibration analysis of viscoelastic micro-composite beam reinforced by various distributions of boron nitrid nanotube (BNNT) with initial geometrical imperfection by modified strain gradient theory (MSGT) using finite element method (FEM) are presented. The various distributions of BNNT are considered as UD, FG-V and FG-X and also, the extended rule of mixture is used to estimate the properties of micro-composite beam. The components of stress are dependent to mechanical, electrical and thermal terms and calculated using piezoelasticity theory. Then, the kinematic equations of micro-composite beam using the displacement fields are obtained. The governing equations of motion are derived using energy method and Hamilton's principle based on MSGT. Then, using FEM, these equations are solved. Finally the effects of different parameters such as initial geometrical imperfection, various distributions of nanotube, damping coefficient, piezoelectric constant, slenderness ratio, Winkler spring constant, Pasternak shear constant, various boundary conditions and three material length scale parameters on the behavior of nonlinear static, buckling and vibration of micro-composite beam are investigated. The results indicate that with an increase in the geometrical imperfection parameter, the stiffness of micro-composite beam increases and thus the non-dimensional nonlinear frequency of the micro structure reduces gradually.

• Structural Engineering and Mechanics
• /
• 제71권5호
• /
• pp.577-601
• /
• 2019

The paper investigates the influence of the rheological parameters which characterize the creep time, the long-term values of the mechanical properties of viscoelastic materials and a form of the creep function around the initial state of a deformation of the materials of the hollow bi-layered cylinder on the dispersion of the flexural waves propagated in this cylinder. Constitutive relations for the cylinder's materials are given through the fractional exponential operators by Rabotnov. The dispersive attenuation case is considered and numerical results related to the dispersion curves are presented and discussed for the first and second modes under the first harmonic in the circumferential direction. According to these results, it is established that the viscosity of the materials of the constituents causes a decrease in the flexural wave propagation velocity in the bi-layered cylinder under consideration. At the same time, the character of the influence of the rheological parameters, as well as other problem parameters such as the thickness-radius ratio and the elastic modulus ratio of the layers' materials on the dispersion curves, are established.

• Computers and Concrete
• /
• 제27권3호
• /
• pp.253-268
• /
• 2021

The present paper treats the free vibration problem of the masonry wall strengthened with thin composite plate by viscoelastic adhesive layer. For this goal two steps are considered in the analytical solution. In the first one, an efficient homogenisation procedure is given to provide the anisotropic properties of the masonry wall. The second one is dedicated to purpose simplified mathematical models related to both in-plane and out-of-plane vibration problems. In these models, the higher order shear theories (HSDT's) are employed for a more rigours description of the shear deformation trough the masonry wall and the composite sheet. Ritz's method is deployed as solution strategy in order to get the natural frequencies and their corresponding loss factors. The obtained results are validated with the finite element method (FEM) and then, a parametric study is undertaken for different kinds of masonry walls strengthened with composite sheets.

• 한국도로학회논문집
• /
• 제2권3호
• /
• pp.129-144
• /
• 2000

골재의 입도에 따른 SBS 개질 아스팔트 혼합물의 점탄성 물성 및 피로공용 특성을 소개하였다. 아스팔트 바인더와 혼합물의 열역학적 거동분석을 위해 DSR 시험과 일축인장 크립시험을 실시하였다. 골재의 입도와 SBS 개질재가 피로공용성에 미치는 영향을 평가하기 위하여 7종의 아스팔트 혼합물에 대해 일축인장 피로시험을 실시하였다. DSR 및 일축인장 크립시험결과, 골재의 입도에 관계없이 SBS 개질 아스팔트 혼합물이 일반 아스팔트 혼합물에 비해 고온에서 소성변형에 대한 저항성이 큰 것으로 나타났다. Superpave 아스팔트 바인더 규격의 피로인자 $G^*sin\delta$는 아스팔트 혼합물의 피로 공용성 평가에 사용하기에는 부적절한 것으로 사료된다. 일축인장피로시험결과, 골재의 입도(밀입도, Superpave입도, SMA입도)에 관계없이 SBS 개질 아스팔트 혼합물이 일반 혼합물에 비해 약 10배 이상 피로수명이 큰 것으로 나타났다. 장기노화후의 경우에 있어서도 SBS 개질 혼합물의 피로수명이 일반 혼합물에 비해 높게 나타났다. 골재의 입도변화는 SBS 개질재에 비해 피로공용성에 미치는 영향이 적었다. SMA 혼합물에 첨가한 셀룰로오스 섬유는 혼합물의 점탄성 물성이나 피로공용성에 미치는 영향이 미미하였으나, Draindown을 방지하는 데는 효과적이었다. SMA 입도에 SBS 개질아스팔트를 사용할지라도 Draindown 방지를 위해서는 셀룰로오스 섬유를 첨가할 필요가 있을 것으로 사료된다.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.245-253
• /
• 2010

전자기기부품에 적용되는 회로기판의 패키지 공정상에서 가해지는 온도변화에 따른 신뢰성 평가시 발생되는 문제들은, 주로 회로기판을 구성하고 있는 기본 재료들의 열팽창 계수 차이 및 시간의존성 물성에 의해 영향을 받는다. 특히, 인쇄회로기판 내부 회로층 사이에서 절연 역할을 수행하는 유리섬유강화 복합재료와 같은 수지몰딩 고분자 재료는 온도에 따른 물성변화 뿐만 아니라, 변형 및 하중이 가해지는 시간에 대한 물성변화도 고려해야 하는 점탄성 성질을 나타낸다. 본 논문에서는 인쇄회로기판에 사용되는 주요 고분자 재료인 유리섬유강화 복합재의 시간 및 온도에 따른 점탄성 특성을 규명하기 위하여, 단축인장 모드의 응력완화 시험과 크리프 시험을 각각 수행하였다. 또한, 고분자 재료 점탄성 물성의 영향성을 파악하기 위하여, 유한요소해석을 이용한 인쇄회로기판의 예비가열 공정 상에서 가해지는 온도변화에 따른 열변형을 평가하였다. 이러한 해석결과를 바탕으로, 인쇄회로기판과 같이 고분자재료를 사용하는 전자회로 구조물의 수치해석 기반의 열변형 예측시 점탄성 물성의 고려 필요성을 검증하였다.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.359-370
• /
• 2000

The purpose of this investigation was to observe the viscoelastic properties of five commercial flowable(Aeliteflo, Flow it, Revolution, Tetric flow, Compoglass flow), three conventional hybrid(Z-100, Z-250, P-60) and two condensable(Synergy compact, SureFil) resin composites. A dynamic oscillatory shear test was done to evaluate the storage shear modulus (G'), loss shear modulus(G"), loss tangent(tan ${\delta}$) and complex viscosity(${\eta}^*$) of the resin composites as a function of frequency - dynamic frequency sweep test from 0.01 to 100 rad/s at $25^{\circ}C$ - by using Advanced Rheometric Expansion System(ARES). To investigate the effect on the viscosity of resin composites of filler volume fraction, the filler weight % and volume % were measured by means of Archimedes' principle using a pyknometer. The results were as follows 1. The complex viscosity ${\eta}^*$ of flowable resins was lower than that of hybrid resins and significant differences were observed between brands. The complex viscosity ${\eta}^*$ of condensable resins was higher than that of hybrid resins. The order of complex viscosity ${\eta}^*$ at ${\omega}$=10 rad/s was as follows, Surefil, Synergy compact, P-60, Z-250, Z-100, Aeliteflo, Tetric flow, Compoglass flow, Flow it, Revolution. The relative complex viscosity of flowable resins compared to Z-100 was 0.04~0.56 but Surefil was 30.4 times higher than that of Z-100. 2. The storage shear modulus G' and the loss shear modulus G" of flowable resins were lower than those of hybrid resins but those of condensable resins were higher. The patterns of the change of loss tangent, tan ${\delta}$, of resin composites with increasing frequency were significantly different between brands. The phase angles, ${\delta}$, ranged from $30.2{\sim}78.1^{\circ}$ at ${\omega}$=10 rad/s. 3. All composite resins represent pseudoplastic nature with increasing shear rate. 4. The complex shear modulus $G^*$ and the phase angle ${\delta}$ was represented by the frequency domain phasor form, $G^*({\omega})=G^*e^{i{\delta}}=G^*{\angle}{\delta}$. The locus of frequency domain phasor plots in a complex plane was a valuable method that represent the viscoelastic properties of composite resins. 5. There was no direct linear correlationship but a weak positive relation was observed between filler volume % or weight % and the viscosity of the resin composites.

• Applied Biological Chemistry
• /
• 제48권3호
• /
• pp.273-279
• /
• 2005

To develop cosmetics using Jindalae flowers (Rhododendron mucronulatum), the surface tensions of extracts were measured and the properties and stability of cream with extracts were investigated. The surface tension of 0.1% ethanol extract was 30.42 mN/m and that of distilled water was 72.2 mN/m. The surface tension of cream with 0.1% ethanol extract was similar to that of sample cream and the measured pH were weakly alkalic. The surface tension of 1% ethanol extract was the lowest value of 24.98 mN/m, the measured pH of cream with 1% ethanol extract was weakly acidic and the particle size of cream was stable. According to an oscillatory test, linear viscoelastic region was extended by adding of 1% water extract and 1% ethanol extract to cream, indicating that the cream had greater enhanced resistance for preserving inner structure as compared to outside stress.　Besides, as a result of the diminished loss angle of ethanol extract cream, the elasticity of cream was increased more than that of sample cream and cream with 0.1% ethanol extract. In contrast, in the case of the increased loss angle of water extract cream, the viscosity of cream was increased. In conclusion, Rhododendron mucronulatum can be deliberated as a cosmetic material because 0.1% water and ethanol extracts showed efficacious physiological activities and cream with 1% extracts could extend linear viscoelastic region.

• Journal of Biosystems Engineering
• /
• 제17권3호
• /
• pp.260-271
• /
• 1992

Fruits are generally subjected to mechanical forces during harvesting, handling, and transportation that may cause damage in the form of bruises, punctures, and cracks. In order to prevent damage, and insure better quality fruits for consumers, it is very essential to study physical properties of these materials. The studies were conducted to examine the effect of storage period, storage condition, and other factors, such as loading rate and initial strain, on the stress relaxation behavior of the fruit flesh, and develop nonlinear viscoelastic models to represent its stress relaxation behavior. The following results were obtained from the study : 1. Since the viscoelastic behavior of the fruits flesh was nonlinear, the behavior was satisfactorily modelled as follows ; $${\delta}({\varepsilon},\;t)={\varepsilon}^A[B\;{\exp}(-Ct)+D\;{\exp}(-Ft)+G(-Ht)]$$ But, for the every strain applied, the stress relaxation behavior of the fruit flesh, such as apple and pear, could be well described by the Generalized Maxwell model, respectively. 2. The effect of loading rate on the stress relaxation behavior was remarkable. The higher loading rate resulted in the higher initial stress, and the faster stress relaxation. 3. The higher initial strain resulted in the higher initial stress, and stress relaxed at the large initial strain was also much higher than at the small initial strain. 4. Stress relaxation rate and quantity stored in the fruits at the low temperature storage were much higher than those at the normal temperature storage in the same storage period. Also, in all fruits tested, the longer storage period was the more relaxation rate and quantity were shown. These trends in the normal temperature condition was the more significant than in the low temperature condition.

• 폴리머
• /
• 제26권5호
• /
• pp.559-567
• /
• 2002

Poly (vinyl chloride) (PVC)와 vinyl chloride(VC)/acrylonitrile(AN) 함량비에 따른 poly-(VC-co-AN)와의 블렌드 필름을 제조하여 morphology, 점도, 동적 점탄성 및 기계적 물성을 고찰하였다. 블렌드의 morphology는 전반적으로 matrix-domain 형태의 비상용계로 공중합체에서 VC 함량이 증가할수록 morphology는 다소 균일하였다. 특히 VC 함량이 77.21%인 MO-01 블렌드의 경우 PVC가 많은 영역에서 상용성은 우수하였다. 블렌드 용액의 점도는 전반적으로 비상용성으로 인하여 negative deviation을 보이나, MO-01 블렌드에서 PVC 함량이 90%일 때 급격한 점도의 증가를 보였으며, 저장탄성율 및 T$_{g}$ 거동에서 MO-01 블렌드의 경우 상용성 블렌드의 T$_{g}$ 변화와 경향이 유사하였으나 MO-02 및 MO-03의 경우 비상용성 블렌드의 경향을 나타내었다. PVC와 poly(VC-co-AN)의 블렌드에서 VC의 함량이 가장 높은 MO-01와 90:10인 조건에서의 상용성이 가장 뛰어났으며, 블렌드 필름의 기계적 물성의 향상은 발견할수 없었다.

• 접착 및 계면
• /
• 제3권4호
• /
• pp.1-9
• /
• 2002

본 연구의 목적은 목분과 폴리프로필렌으로 제조한 목질-고분자 복합재료의 점탄성적 성질에 미치는 결합제, 기핵제의 영향에 대해 고찰하는데 있으며, 목분과 결합제간의 esterification 반응이 목질-고분자 복합재의 기계적 성질에 미치는 영향 또는 고찰하고자 한다. 복합재는 목분 60%와 폴리프로필렌 40%를 혼합하여 제조하였으며, DMTA (Dynamic mechanical thermal analysis)를 사용하여 damping peaks (than ${\delta}$), storage modulus (E'), loss modulus (E")를 측정하였다. 또한 XPS (X-ray Photolectron Spectroscopy)를 사용하여 목분에 MAPP를 처리하기 전과 후의 상태를 고찰하였다. DMA 시험은 온도범위 $-20{\sim}100^{\circ}C$에서 여러가지 주파수 (1, 5, 10, 25 HZ) 조건과, 승온속도 $5^{\circ}C/min$으로 실시하였다. 이 시험결과를 토대로 복합재의 활성화에너지를 구하여 결합제와 기핵제가 목분과 고분자물질간 계면의 성질에 미치는 영향을 고찰하였다.