• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.431-438
• /
• 2003

This study investigates pulp chamber temperature rise during composite resin polymerization by plasma arc(Group III : Flipo 3 sec, Group IV : Flipo 5 sec) and LED curing units(Group V : Lux-O-Max, 40 sec) as well as conventional halogen lamp curing units(Group I : VIP mode3, 20 sec, Group II : VIP mode6, 20 sec). The results are as follows : 1. All of the investigated pulp chamber temperature rises are lower than the boundary temperature could result in irreversible damage to the pulpal tissue ($5.5^{\circ}C$). 2. In the group II, it is found the significantly higher pulp chamber temperature rise than any other groups(p<0.05). 3. In the group of composite resin light-cured with VIP, it is found the significantly higher pulp chamber temperature rise in the group II than group I(p<0.05). 4. In the group of composite resin light-cured with Flipo, it is found the significantly higher pulp chamber temperature rise in the group IV than group III (p<0.05). 5. In the case of comparing VIP and Flipo, group II is significantly higher pulp chamber temperature rise than group III, IV(p<0.05), and group IV is significantly higher pulp chamber temperature rise than group I(p<0.05), and it does not significantly differ between group I and III. 6. In the group of composite resin light-cured with Lux-O-Max, it is found the significantly lower pulp chamber temperature rise than any other groups (p<0.05).

• Elastomers and Composites
• /
• v.50 no.1
• /
• pp.30-34
• /
• 2015

Thermo-mechanical treatment process of a compressed open-cell rigid polyurethane foam (OC-RPUF), which was fabricated for the vacuum insulation panel (VIP), was studied to obtain an optimum condition for the dimensional stability by the relaxation of compressive stress. Thermo-mechanical deformation of the sample OC-RPUF was shown to occur from about $120^{\circ}C$. Yield stress of 0.36 MPa was shown at about 10% yield strain. And, densification of the foam started to occur from 75% compressive strain and could be continued up to max. 90%. Compression set of the sample restored after initial compression to 90% at room temperature was ca. 82%. Though the expansion occurred to about twice of the originally compressed thickness in case of temperature rise to $130^{\circ}C$, it could be overcome and the dimensional stability could be maintained if the constant load of 0.3 MPa was applied. As the result, a thermo-mechanical treatment process, i.e, annealing process at temperature of $130{\sim}140^{\circ}C$ for about 20 min as is the maximum compressed state at room temperature, should be required for dimensional stability as an optimum condition for the use of VIP core material.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.81-82
• /
• 2009

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.158-174
• /
• 2002

The aim of this study was to investigate the effect of light irradiation modes on polymerization shrinkage, degree of cure and microleakage of a composite resin. VIP$^{TM}$ (Bisco Dental Products, Schaumburg, IL, USA) and Optilux 501$^{TM}$ (Demetron/Kerr, Danbury, CT, USA) were used for curing Filtek$^{TM}$ Z-250 (3M Dental Products, St. Paul., MN, USA) composite resin using following irradiation modes: VIP$^{TM}$ (Bisco) 200mW/$\textrm{cm}^2$ (V2), 400mW/$\textrm{cm}^2$ (V4), 600mW/$\textrm{cm}^2$ (V6), Pulse-delay (200 mW/$\textrm{cm}^2$ 3 seconds, 5 minutes wait, 600mW/$\textrm{cm}^2$ 30seconds, VPD) and Optilux 501$^{TM}$ (Demetron/Kerr) C-mode (OC), R-mode (OR). Linear polymerization shrinkage of the composite specimens were measured using Linometer (R&B, Daejeon, Korea) for 90 seconds for V2, V4, V6, OC, OR groups and for up to 363 seconds for VPD group (n=10, each). Degree of conversion was measured using FTIR spectrometer (IFS 120 HR, Bruker Karlsruhe, Germany) at the bottom surface of 2 mm thick composite specimens V2, Y4, V6, OC groups were measured separately at five irradiation times (5, 10, 20, 40, 60 seconds) and OR, VPD groups were measured in the above mentioned irradiation modes (n=5 each). Microhardness was measured using Digital microhardness tester (FM7, Future-Tech Co., Tokyo, Japan) at the top and bottom surfaces of 2mm thick composite specimens after exposure to the same irradiation modes as the test of degree of conversion(n=3, each). For the microleakage test, class V cavities were prepared on the distal surface of the ninety extracted human third molars. The cavities were restored with one of the following irradiation modes : V2/60 seconds, V4/40 seconds, V6/30 seconds, VPD , OC and OR. Microleakage was assessed by dye penetration along enamel and dentin margins of cavities. Mean polymerization shrinkage, mean degree of conversion and mean microhardness values for all groups at each time were analyzed using one-way ANOVA and Duncan's multiple range test, and using chi-square test far microleakage values. The results were as follows : . Polymerization shrinkage was increased with higher light intensity in groups using VIP$^{TM}$ (Bisco) : the highest with 600mW/$\textrm{cm}^2$, followed by Pulse-delay, 400mW/$\textrm{cm}^2$ and 200mW/$\textrm{cm}^2$ groups, The degree of polymerization shrinkage was higher with Continuous mode than with Ramp mode in groups using Optilux 501$^{TM}$ (Demetron/Kerr). . Degree of conversion and microhardness values were higher with higher light intensity. The final degree of conversion was in the range of 44.7 to 54.98% and the final microhardness value in the range of 34.10 to 56.30. . Microleakage was greater in dentin margin than in enamel margin. Higher light intensity showed more microleakage in dentin margin in groups using VIP$^{TM}$ (Bisco). The microleakage was the lowest with Continuous mode in enamel margin and with Ramp mode in dentin margin when Optilux 501$^{TM}$ (Demetron/Kerr) was used.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.4
• /
• pp.283-289
• /
• 2014

This study was conducted to develop a non-destructive detection method for adulterated powder products using Raman spectroscopy and partial least squares regression(PLSR). Garlic and ginger powder, which are used as natural seasoning and in health supplement foods, were selected for this experiment. Samples were adulterated with corn starch in concentrations of 5-35%. PLSR models for adulterated garlic and ginger powders were developed and their performances evaluated using cross validation. The $R^2_c$ and SEC of an optimal PLSR model were 0.99 and 2.16 for the garlic powder samples, and 0.99 and 0.84 for the ginger samples, respectively. The variable importance in projection (VIP) score is a useful and simple tool for the evaluation of the importance of each variable in a PLSR model. After the VIP scores were taken pre-selection, the Raman spectrum data was reduced by one third. New PLSR models, based on a reduced number of wavelengths selected by the VIP scores technique, gave good predictions for the adulterated garlic and ginger powder samples.

• Macromolecular Research
• /
• v.17 no.9
• /
• pp.709-713
• /
• 2009

The aim of this study was to develop novel intestinal specific drug delivery systems with pH sensitive swelling and drug release properties. The carboxyl group of ibuprofen was converted to a vinyl ester group by reacting ibuprofen and vinyl acetate as an acylating agent in the presence of catalyst. The glucose-6-acrylate-1, 2, 3, 4-tetraacetate (GATA) monomer was prepared under mild conditions. Cubane-1, 4-dicarboxylic acid (CDA) linked to two 2-hydroxyethyl methacrylate (HEMA) group was used as the crosslinking agent (CA). Methacrylic-type polymeric prodrugs were synthesized by the free radical copolymerization of methacrylic acid, vinyl ester derivative of ibuprofen (VIP) and GATA in the presence of cubane cross linking agent. The structure of VIP was characterized and confirmed by FTIR, $^1H$ NMR and $^{13}C$ NMR spectroscopy. The composition of the cross-linked three-dimensional polymers was determined by FTIR spectroscopy. The hydrolysis of drug polymer conjugates was carried out in cel-lophane membrane dialysis bags, and the in vitro release profiles were established separately in enzyme-free simulated gastric and intestinal fluids (SGF, pH 1 and SIF, pH 7.4). The detection of a hydrolysis solution by UV spectroscopy at selected intervals showed that the drug can be released by hydrolysis of the ester bond between the drug and polymer backbone at a low rate. Drug release studies showed that increasing the MAA content in the copolymer enhances the rate of hydrolysis in SIP. These results suggest that these polymeric prodrugs can be useful for the release of ibuprofen in controlled release systems.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.110-122
• /
• 2014

Korea's film industry has been growing over the last 10 years, and there has been much attention to the antecedents of film box office sales both academic and business communities. So far, previous research which explained success factors of film or movie mainly focused on 3 stages, production, distribution and screening. However, these 3 steps are heavily vertically integrated in Korea's firm industry unlike United States. Almost 130% of movie theaters are multiplex chain and operated by film production companies such as CJ and Lotte Entertainment In this situation, film sales are likely to he affected by movie theaters own facilities or location factors rather than movie contents. Based. on resource-based view and S-C-P paradigm, the authors examined "whether movie theater's facilities factors and trade area factors such as accessibility, competitive situation, and population have effect to movie theater's sales revenues. The results showed that the average occupancy of theater is the most important factor to movie theaters sales in both large and small cities. In large cities, movie theater's facilities factors which included vibration seat special sound system, premium movie theater, VIP lounge are relatively important than trade area factors. In contrast, in small cities, location factors and accessibility are the most important factors to movie theaters sales. We discuss the managerial and theoretical implication for the results and the specific limitations are suggested at the end of the paper.

• The KIPS Transactions:PartC
• /
• v.9C no.5
• /
• pp.699-708
• /
• 2002

Since various terminals and different networks get involved in playing of a multimedia presentation, the case that the presentation QoS at a destination should be different from the QoS of multimedia data at a source occurs frequently. For playing the multimedia presentation, the multimedia data at a source should be transcoded into the multimedia data satisfying the QoS required at the terminal. The problem of generating the transcoding path is that, for a given multimedia presentation, different transcoding paths depending the terminal and networks should be generated. That is, a fixed transcoding path cannot be applied to a multimedia presentation. Instead, whenever the terminal and network to play the presentation get determined, a proper transcoding path should be regenerated automatically. In this paper, the algorithm for generating the transcoding path and the method for checking the playability of the generated path are proposed. The generating algorithm adopted the technique of Context Free Grammar in describing the set of transcoding resources and a user's transcoding rules in order to utilize the well-known compiler techniques. For the playability check, a method of computing the transcoding time and the delay time between data units are proposed. Finally all the proposed methods were implemented in the stream engine, called Transcore and the presentation-authoring tool, called VIP, we had developed. And the test results with a sample scenario were presented at the last.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.25-35
• /
• 2024

In the present modern day, as the complexity and size of SoC(System on Chip) increase, the importance of design verification are increasing, Therefore it takes a lot of time to verify the design. There is an emerging need to manage the verification environment faster and more efficiently by reusing the existing verification environment. UVM-based verification is a standardized and highly reliable verification method widely adopted and used in the semiconductor industry. This paper presents a UVM-based verification for the 4 tap equalizer module with a systolic array structure. Through the constraints randomization, it was confirmed that various test scenarios stimulus were generated. In addition, by verifying a simulation comparing the actual DUT outputs with the MATLAB reference outputs, the reuse and efficiency of the UVM test bench could be confirmed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.6099-6104
• /
• 2015

Background: Previous studies investigating the association between miR-34b/c rs4938723 polymorphism and cancer risk showed inconclusive. Here, we performed meta-analysis to investigate the association between miR- 34b/c rs4938723 polymorphism and digestive cancer risk. Materials and Methods: Literature database including PubMed, OVID, Chinese National Knowledge Infrastructure (CNKI) were searched for publications concerning the association between the miR-34b/c rs4938723 polymorphism and digestive cancer risk. Results: A total of 6 studies consisting of 3246 cases and 3568 controls were included in this meta-analysis. The combined analysis suggested the miR-34b/c rs4938723 polymorphism significantly reduced digestive cancer risk under allelic model, homogeneous co-dominant model and recessive model (C vs T: OR=0.88, 95%CI=0.82-0.95, p-value=0.001; CC vs TT: OR =0.67, 95%CI=0.57-0.80, p-value=0.000; CC vs TT/TC: OR=0.68, 95%CI=0.58-0.80, p-value=0.000). Q-test and I2 test revealed no significant heterogeneity in all genotype comparisons. The Begger's funnel plot and Egger's test did not show significant publication bias. Conclusions: The current evidence supports the conclusion that the miR-34b/c rs4938723 polymorphism decreases an individual's susceptibility to digestive cancers.