• Mycobiology
• /
• v.31 no.1
• /
• pp.50-53
• /
• 2003

Perforated vinyl mulching technique was performed on oyster mushroom beds for controlling mushroom diseases. Mycelium under vinyl sheets were safely protected from outside undesirable microorganisms. One of two mushroom farms showed 75% of disease incidence, the other 40% and National Institute of Agricultural Science and Technology(NIAST) 13% in the conventional growing method, whereas 12%, 14%, and 5% in the vinyl mulching cultivation method. Waterlogging caused mushroom bed worse, and Trichoderma spp. were infested on the conventional mushroom bed. Disease incidence investigated in other case was 25% to 30% in the conventional growing method, whereas 5 to 9% in the vinyl mulching cultivation method. Yields in conventional method were 6.5 to 7.2 $kg/m^2$ and those in vinyl mulching method were 7.6 to 8.1 $kg/m^2$. So it was suggested that vinyl mulching technique was good for prevention from disease and elevation of productivity.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.3
• /
• pp.97-104
• /
• 2005

In this study, the change of water content, pH, and combustion weight on the decomposition of poly ester vinyl and high density poly ethylene were examined. The poly ester vinyl was degraded by microorganism in food wastes for 30 days, while high density poly ethylene vinyl was not degraded. Also, the poly ester vinyl was rapidly degraded after the 10 days of operation and its weight was decreased. In the combustion reaction between $300^{\circ}C$ and $600^{\circ}C$, complete combustion was performed. Due to the degradation of poly ester vinyl by microorganism in food waste, the pH was increased from 4.26 to 7.6. During of 60 days operation, poly ester vinyl was degraded over 90%.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.79-84
• /
• 2012

This study consist of two parts. One is development of a self-propelling vinyl remover which was already reported at the previous paper. This is the second part of the study. For the study, an attached vinyl remover was developed. It was consisted of connecting tractor to bucket, removing bucket from tractor, and the process was the tractor's assistance hydraulics. In the case of an attached vinyl remover, the vinyl was twisted 0.5times per 30~85cm length. The bobbin's diameter was 190mm and it's stable travelling speed was 1m/s. The revolution of the remover wheel was 90rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10 a area, the average working speed was 1m/s and the turning time was 20seconds. Therefore, the working performance was 24.5min/10a. The efficiency of used vinyl remover was 97% and working conditions were good.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.624-629
• /
• 1994

Chitosan-g-poly(4-vinyl pyridine)membranes were prepared by crosslinking reaction using glutaraldehyde and glucose oxidase immobilized chitosan/acrylamide composite membranes were fabricated by chitosan-g-poly(4-vinyl-pyridine) copolymer and acrylamine. Water content and permeability of insulin through chitosan-g-poly(4-vinyl pyridine )membranes increased with decreasing the pH of the medium. Permeability of insulin through chitosan/acrylamide composite membranes increased with increasing the concentration of glucose.

• Journal of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.88-93
• /
• 1962

The telomerization of vinyl acetate with carbon tetrachloride, chloroform and monochlorobenzene were investigated with respect to the synthesis of those telomers, properties and molecular weights of the formed telomers, and reaction mechanisms. Vinyl acetate reacted with carbon tetrachloride and chloroform to form telomers at 70-90$^{\circ}C$ and 60-70$^{\circ}C$, respectively and it formed polymer with monochlorobenzene. As a chain transfer agent, carbon tetrachloride was more effective than chloroform. In the telomerization of vinyl acetate and carbon tetrachloride: 1) The average molecular weight of the telomer decreased as the mole ratio of carbon tetrachloride to vinyl acetate increased. The optimum conditions for the highest yield of the telomer were as follows: Mole ratio of carbon tetrachloride to vinyl acetate : 2.5 Reaction time : 20 hours. 2) As the reaction proceeded, the refractive index and average molecular weight of the telomer increased rapidly in the first 10 hours but the increase was slow through the next 10 hours, so that, the average recurring number(n) of taxogen in the final product reached an almost definite value, i.e., 3. The telomer formed in the telomerization of vinyl acetate with carbon tetrachloride and chloroform turned to brown color in the air due to decomposition or polymerization. The suggested telomerization mechanism was supported by the hexachloroethane detected in the course of reaction.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.62-69
• /
• 2016

In this study, sulfonated poly(ether ether ketone) (SPEEK) as cation exchange membrane and blended and crosslinked poly(vinyl amine) (PVAm) with poly(vinyl alcohol) (PVA) membrane as anion exchange membrane were used and then the performance experiments of the membrane capacitive deionization (MCDI) installed with both membranes were carried out. The newly prepared anion exchange membrane were characterized through water content, ion exchange capacity and FT-IR. The crosslinking time of 3 h to 5 h indicated that the salt removal was reduced from 81.3, 65.7% to 53.8%. The effect of PVAm contents from 40, 60, to 80% on the salt removal was shown 81.3, 75.2 and 37.7%, respectively. As a result, it was concluded that the crosslinking time and the content of PVAm had an influence on the salt removal efficiency.

• Korean Association of Arts Management
• /
• no.60
• /
• pp.37-68
• /
• 2021

The purpose of this study is to understand the attractiveness of the vinyl record industry and derive implications by analyzing the structure of the industry. A few previous studies pay attention to the rapidly increasing demand for vinyl records, especially from a consumer point of view, and unlike the analysis of the consumption and vinyl record industry, this study focuses on the subjects of production and distribution of vinyl records. This paper collects data through in-depth interviews with experts in the vinyl record industry and various secondary data, which is analyzed by Porter(1980/2008)'s Five Forces Model. According to the analysis, the attractiveness of the vinyl record industry is positive in terms of the appropriate competitive strength in the industry and weak bargaining power of buyers, but negative in terms of the strong bargaining power of new entrants and substitutes. The outcome of this research has significance as basic data implying that companies that are trying to enter the vinyl record industry need to make strategic decisions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.54-58
• /
• 1992

In order to determine the optimum planting density of Sickle Senna (Cassia tora L.), agronomic characters, yield components and grain yield were investigated under vinyl mulching and non -mulching condition. The characters, stem length, stem diameter, number of branches, number of pods per plant, number of pods per m$^2$, and number of grains per pod, etc., were excellent under the vinyl mulching condition, and number of pods per m$^2$ was the highest in 60$\times$15cm planting space under vinyl mulching or non-mulching. Both of the weight of 100 grains and grain yield were also higher under the vinylmulching condition, and grain yield was the most excellent in 60$\times$15cm planting space under the vinlymulching, or non-mulching. Under the vinyl mulching and non-mulching, the analysis of variance for agronomic characters following the difference of planting density, were acknowledged to be worth of attention.

• Clean Technology
• /
• v.16 no.2
• /
• pp.73-79
• /
• 2010

Vinyl acetate(VAc) was dispersion-polymerized using supercritical carbon dioxide that has many environmental advantages. To get poly(vinyl acetate) (PVAc) of larger molecular weights from conventional emulsion polymerization, VAc was polymerized at temperatures between 333.15 and 343.15 K and pressures between 20 and 40 MPa with initiator (0.5 ~ 5% of monomer) and silicone-based stabilizer (1 ~ 10% of monomer) for 2 ~ 50 hr. The resulting PVAc was analyzed to see the variations in the yield and the molecular weight. The final product of this research, PVA (poly(vinyl alcohol)), was prepared from PVAc by saponification. The effect of saponification conditions on the yield and the molecular weight of polymer were also studied.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.91-97
• /
• 1984

This study was performed to suggest the basic information for the development of covering method for increasing the effect of heat conservation in the unheated vinyl houses. Double and single covered vinyl houses were constructed and the inside temperature variation of the double covered vinyl house was compared to the single covered vinyl house. The results obtained for the vinyl houses were summarized as follows ; 1. With the outside temperature of $-1.0^{\circ}C{\sim}7.5^{\circ}C$ and the solar radiation of maximum $1.02MJ/m^2$, the double covered vinyl house was shown $1.2^{\circ}C$ higher than the single covered vinyl house in the daily mean of inside temperature. 2. The inside temperature of the double covered vinyl house was $2.3^{\circ}C$ higher in the daytime and $1.2^{\circ}C$ higher in the nighttime than that of the single covered vinyl house. 3. The inside temperature of the vinyl house were expressed by the formular (1)-(6) with the outside temperature and by the formular (7)-(10) with the solar radiation. 4. In the effect of heat conservation based on the outside temperature, the double covered vinyl house was 1.2 times in the daytime and 1.76 times in the nighttime in comparison with the single covered vinyl house.