Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study on the Development of Twist Wheel Type Waste Vinyl Remover (II) - Development of Tractor Attached Vinyl Remover -

Twist Wheel 방식 폐비닐수거기 개발에 관한 연구(II) - 트랙터 부착형 수거기의 개발 -

  • 하유신 (경북대학교 생물산업기계공학과) ;
  • 박규식 (경북대학교 생물산업기계공학과) ;
  • 김진현 (경북대학교 정밀기계공학과) ;
  • 최중섭 (경북대학교 정밀기계공학과) ;
  • 손철민 (포항대학교 기계시스템과) ;
  • 남상헌 (영남이공대학교 자동차계열) ;
  • 김태욱 (경북대학교 정밀기계공학과)
  • Published : 2012.04.30
⟨ Previous Next ⟩

Abstract

This study consist of two parts. One is development of a self-propelling vinyl remover which was already reported at the previous paper. This is the second part of the study. For the study, an attached vinyl remover was developed. It was consisted of connecting tractor to bucket, removing bucket from tractor, and the process was the tractor's assistance hydraulics. In the case of an attached vinyl remover, the vinyl was twisted 0.5times per 30~85cm length. The bobbin's diameter was 190mm and it's stable travelling speed was 1m/s. The revolution of the remover wheel was 90rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10 a area, the average working speed was 1m/s and the turning time was 20seconds. Therefore, the working performance was 24.5min/10a. The efficiency of used vinyl remover was 97% and working conditions were good.

Keywords

References

  1. Park, S. T., Jang, I. J., Chung, C. H., Kim, S. Y., Kim, J. H., Moon, H. P., Yang, S. J. and Kim, S. C., "Development of a Tractor Attached Rice Transplanter and Its Practicality on Rice Cultication", Kor. J. Intl. Agri, 14(3) : 143-150.
  2. DAEDONG, "Specification of 3C100 type", Daedong Co., LTD. 2010.
  3. Koh, H. K., Choi, C. H., Lee, K. S. and Kim, J. M., "Present Situation & Development Strategy of Implements for 4-wheel Tractor", Proceedings of the Korean Society for Agricultural Machinery Conference, pp. 209-215, 1996.
  4. Lee, K. S., Kim, J. H., Noh, K. M. and Park, W. Y., "Kinematic Simulation of Loader Mechanism mounted on Tractor", Proceedings of the Korean Society for Agricultural Machinery Conference, pp. 28-34, 1996.
  5. FACT, "Standard of vinyl remover", The Foundation of Agri. Tech. Commercialization and Transfer, 2010.
  6. FACT, "Test Method of vinyl remover", The Foundation of Agri. Tech. Commercialization and Transfer, 2010.