• 한국지반환경공학회 논문집
• /
• 제12권12호
• /
• pp.5-12
• /
• 2011

본 연구에서는 용해성 입자를 포함한 혼합재가 용해과정에서 발생하는 입자구조의 미시적 및 거시적 거동을 수치해석기법을 이용하여 조사하였다. 혼합재는 다양한 부피비의 용해성 입자와 비용해성 입자를 혼합하여 조성하였다. 용해성 입자의 용해과정은 입자의 크기를 감소시킴으로써 모사하였다. 수치해석 결과 일정한 시간까지 시료의 수직변형은 진행되며, 수직변형이 평형에 도달한 후에도 용해작용이 진행되어 간극률은 변화한다. 또한, 간극률과 수직변형은 용해성 입자의 함유량이 증가함에 따라 증가한다. 본 연구에서는 수치해석을 통하여 용해성 입자를 포함한 시료의 용해과정에서 입자구조의 변화는 특정 시간까지 진행되며, 용해성 입자의 부피가 클수록 구조 변화가 큰 결론을 얻었다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제28권3호
• /
• pp.17-26
• /
• 2022

Purpose: The purpose of this study is to classify space types according to the operating system of health examination centers and compare and analyze their sizes. Methods: Seven examination centers under the K Medical Research Institute with the same operating system and similar examination types and functional spaces are the subject of the investigation. Research is conducted through field investigation, user surveys, and drawing analysis. Results: The operating method of the health examination center can be largely divided into the function dispersed type and the function central type. The function dispersed type was planned as a vertical type, and the function central type was planned as a horizontal type. In the case of the function dispersed type, since the examinees move vertically to use the endoscope center and special examination center, the efficiency of the vertical movement must be considered when planning the function dispersed type of facility. The function dispersed type plans to increase work and manpower efficiency by arranging the areas used at the start and end of the examination. Because the function central type horizontally arranges related functions by area, it should be planned in a structure that makes it easy for examinees to find their way. Implications: Through this study, it is judged that it is possible to suggest architectural planning considerations that vary depending on the operation system of the examination center.

• 한국지반환경공학회 논문집
• /
• 제10권1호
• /
• pp.25-34
• /
• 2009

댐이나 항만 건설시 재료로 사용되는 조립재는 입자크기가 일반 토사에 비해 매우 크기 때문에 이러한 재료에 대해서 전단시험을 수행할 때에는 가급적 대형 전단시험장치를 사용하는 것이 보다 정확한 결과를 얻기 위해 바람직하다. 대형 전단시험장치로는 일반적으로 대형 직접전단시험장치와 대형 삼축압축시험장치가 있으나 일반 토질시험장치와 비교해 제작과 보급, 운영 등의 어려움 때문에 현재까지 국내에서 두 시험장치를 사용하여 시험을 수행한 실적은 많지 않은 편이다. 본 연구에서는 댐 축조재로 사용되는 입경이 큰 조립재료를 대상으로 시료의 평균 입자크기와 공시체 크기, 연직응력(구속압) 조건 등에 차이가 있는 총 6개 case에 대해서 대형 직접전단시험과 대형 삼축압축시험을 수행하고 두 시험간 전단강도 특성의 차이를 비교하였다. Mohr-Coulomb 강도규준에 의한 전단강도를 기준으로, 대형 직접전단시험을 통해 산정된 전단강도가 대형 삼축압축시험을 통해 산정된 전단강도보다 전체적으로 크게 나타났으며 또한, 1,000kPa 수직응력에 대해 두 시험간 산정된 전단강도를 비교한 결과 대형 직접전단시험에 의한 전단강도가 대형 삼축압축시험에 의한 전단강도보다 약 10~70% 크게 나타나 입경이 작은 일반 토사와 비교해 그 차이가 크고, 대형 직접전단시험결과의 분산도가 상대적으로 높은 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.93-112
• /
• 2000

The permeability of converter slag, replacing material of sand mat on improving soft clay foundation, was evaluated in the laboratory. The effects of grain size, flow water time and aging were investigated using sea and fresh water. Converter slag being submerged with fresh water, the coefficients of permeability in A and B samples less than 10mm grain sizes were measured as 6.52${\times}$10$\^$-2/cm/sec and 5.99${\times}$10$\^$-1/cm/sec, while changed as 1.88${\times}$10$\^$-2/cm/sec, 3.86${\times}$10$\^$-1/cm/sec under sea water condition. Also, the condition of turbulent flow may exit and was experimentally identified from the relationship between hydraulic gradient and seepage velocity. After 180 days on using sea water, the coefficients of permeability of sample A and B samples decreased ten times smaller than those initial values. And after that time continually decreased as for till 360 days. The reduction of permeability coefficient was considered to influence filled with voids in high-calcium quicklime(CaO). However, in-situ coefficient of permeability was practically satisfactory.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.12-31
• /
• 2000

The permeability of converter slag, replacing material of sand mat on improving soft clay foundation, was evaluated in the laboratory. The effects of grain size, flow water time and aging were investigated using sea and fresh water. Converter slag being submerged with fresh water, the coefficients of permeability in A and B samples less than 10mm grain sizes were measured as 6.52${\times}$10$\^$-2/cm/sec and 5,99${\times}$10$\^$-1/cm/sec, while changed as 1,88${\times}$10$\^$-2/cm/sec, 3.86${\times}$10$\^$-1/cm/sec under sea water condition. Also, the condition of turbulent flow may exit and was experimentally identified from the relationship between hydraulic gradient and seepage velocity. After 180 days on using sea water, the coefficients of permeability of sample A and B samples decreased ten times smaller than those initial values. And after that time continually decreased as for till 360 days. The reduction of permeability coefficient was considered to influence filled with voids in high-calcium quicklime(CaO). However, in-situ coefficient of permeability was practically satisfactory.

• ETRI Journal
• /
• 제34권6호
• /
• pp.962-965
• /
• 2012

In this letter, we propose a new RESURF stepped oxide (RSO) process to make a semi-superjunction (semi-SJ) trench double-diffused MOSFET (TDMOS). In this new process, the thick single insulation layer ($SiO_2$) of a conventional device is replaced by a multilayered insulator ($SiO_2/SiN_x/TEOS$) to improve the process and electrical properties. To compare the electrical properties of the conventional RSO TDMOS to those of the proposed TDMOS, that is, the nitride_RSO TDMOS, simulation studies are performed using a TCAD simulator. The nitride_RSO TDMOS has superior properties compared to those of the RSO TDMOS, in terms of drain current and on-resistance, owing to a high nitride permittivity. Moreover, variations in the electrical properties of the nitride_RSO TDMOS are investigated using various devices, pitch sizes, and thicknesses of the insulator. Along with an increase of the device pitch size and the thickness of the insulator, the breakdown voltage slowly improves due to a vertical field plate effect; however, the drain current and on-resistance degenerate, owing to a shrinking of the drift width. The nitride_RSO TDMOS is successfully fabricated, and the blocking voltage and specific on-resistance are 108 V and $1.1m{\Omega}cm^2$, respectively.

• Wind and Structures
• /
• 제14권5호
• /
• pp.435-447
• /
• 2011

A Computational Fluid Dynamics model is presented in this study for the simulation of the complex fluid flows with free surfaces inside the Tuned Liquid Column Dampers in horizontal motion. The characteristics of the fluid model of the TLCD in horizontal motion include the free surface of the multiphase flow and the horizontal moving frame. In this study, the time depend unsteady Standard ${\kappa}-{\varepsilon}$ turbulent model based on Navier-Stokes equations is chosen. The volume of fluid (VOF) method and sliding mesh technique are adopted to track the free surface of water inside the vertical columns of TLCD and treat the moving boundary of the walls of TLCD in horizontal motion. Several model solution parameters comprising different time steps, mesh sizes, convergence criteria and discretization schemes are examined to establish model parametric independency results. The simulation results are compared with the experimental data in the dimensionless amplitude of the water column in four different configured groups of TLCDs with four different orifice areas. The predicted natural frequencies and the head loss coefficient of TLCDs from CFD model are also compared with the experimental data. The predicted numerical results agree well with the available experimental data.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.119-125
• /
• 1999

본 연구는 싸이클론 반응로에서 $FeS_{2}$의 반응 특성에 관한 조사를 연구하였다. 수학적인 모형도로 이 반응로에서 $FeS_{2}$의 oxidation과 suifation 등을 전개하엿다. 모형은 $FeS_{2}$에서 chemical control shrinking core로서 그리고 ${Ca(OH)}_{2}$에서 fluid film control shrinking core로서 가정하였으며 수식으로서 발전시켰다. 본 실험은 이 반응 파라메터들의 영향에 연구로서 진행하였으며 즉 반응로의 온도변화, $FeS_{2}$의 입자크기, 공기 주입비율, 시료 주입비율, 그리고 $FeS_{2}$와 ${Ca(OH)}_{2}$ 비율 등이다. Oxidation과 Sulfation에 의한 반응물들은 화학적 및 물리적으로 특성을 기술하였다.

• 대한조선학회논문집
• /
• 제55권4호
• /
• pp.341-349
• /
• 2018

Recently, it has been reported that the whipping response, which is the elastic phenomenon of the ship, may be one of the causes of the ship accident. Unfortunately, the commonly used methodology for evaluating the whipping effect effectively has not been developed yet. In this study, we developed a procedure to estimate the whipping effect of hull in actual design stage. Fluid-structure interaction analysis was performed for a dominant short term sea state to obtain the time series data of vertical wave bending moment including the whipping response by slamming. In order to estimate the whipping effect by using the time series, some signal processing and statistical techniques such as low pass filtering, Weibull fitting and so on, were applied. the hydro-elasticity analysis was performed on container ships of various sizes to evaluate the whipping effect. The parameters that can affect the response of the hull vibration was selected and the effect of these parameters on whipping was analyzed.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.52-61
• /
• 2000

The role of quantitative nondestructive evaluation of defects is becoming more important to assure the reliability and the safety of structure, which can eventually be used for residual life evaluation of structure on the basis of fracture mechanics approach. Although ultrasonic technique is one of the most widely used techniques for application of practical field test among the various nondestructive evaluation technique, there are still some problems to be solved in effective extraction and classification of ultrasonic signal from their noisy ultrasonic waveforms. Therefore, crack size determination through a neural network based on the back-propagation algorithm using back-scattered ultrasonic signals is established in this study. For this purpose, aluminum plate containing vertical or inclined surface breaking crack with different crack length was used to receive the back-scattered ultrasonic signals by pulse echo method. Some features extracted from these signals and sizes of cracks were used to train neural network and the neural network's output of the crack size are compared with the true answer.