• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.947-964
• /
• 2014

Rubble mound breakwaters protect the coastal line against severe erosion caused by wave action. This study examined the performance of different sizes and properties (i.e. height of vertical wall and tetrapod size) of rubble mound breakwaters on reducing the overtopping discharge. The physical model used in this study was derived based on an actual rubble mound in Busan Yacht Harbor. This research attempts to fill the gap in practical knowledge on the combined effect of the armor roughness and vertical wall on wave overtopping in rubble mound breakwaters. The main governing parameters used in this study were the vertical wall height, variation of the tetrapod weights, initial water level elevation, and the volume of overtopping under constant wave properties. The experimental results showed that the roughness factor differed according to the tetrapod size. Furthermore, the overtopping discharge with no vertical wall was similar to that with relatively short vertical walls (${\gamma}_v=1$). Therefore, the experimental results highlight the importance of the height of the vertical wall in reducing overtopping discharge. Moreover, a large tetrapod size may allow coastal engineers to choose a shorter vertical wall to save cost, while obtaining better performance.

• 복식문화연구
• /
• 제8권6호
• /
• pp.930-939
• /
• 2000

This study was done to provide the fundamental data for scientific and rational children's clothing sizing system by investigating their somatometric characteristics and classifying somatotypes. The subjects were 269 elementary schoolgirls aged from 7 to 8 years old living in Pusan and Kyungsangnam-do. Data from each girl comprises 28 anthropometic measurments and 4 photographic measurments, related to the lower half of body. To analyze somatotypes of the lower half of body, factor analysis, cluster analysis, discriminant analysis were performed for statistical analysis of the data. As to the analysis to draw somatometric factors by this age group, five factors which explain 76.85% of the whole variances were extracted. The first and second factors which explain more than 60% of the whole variances represent 'horizontal size'and 'vertical size', which characterize most aspects of the body shape of the subjects. On the basis of the cluster analysis, three different lower half of body types were categorized. Type Ⅰ has biggest horizontal size, average vertical size and most protruded belly. Type Ⅱ has average degree of horizontal size, quite big vertical size and most protruded hips. Type Ⅲ has smallest horizontal and vertical size. According to the analysis to discriminate somatotypes of the lower half of body of this age group, weight and waist circumference of discriminant function 1 and abdominal circumference of discriminant function 2 have coefficient values.

• 한국의류산업학회지
• /
• 제8권1호
• /
• pp.107-112
• /
• 2006

This study is done to classify the upper body shapes for late elementary schoolgirls. The sampling was done for 11~12 years-old-girls resident in Busan and Kyungnam. Based on the somatometric charateristics of them, 33 anthropometic and 7 photogrphic measurment data were acquired from every girl. These data are statistically analyzed with the following methods; Factor Analysis, Cluster Analysis, and Discriminant Analysis. Resulting from the factor analysis, it is shown that 79.95% of the whole variances can be explained with 8 factors. Through the cluster analysis, 3 types of upper body shapes can be categorized as follows: Type I has average horizontal size, big vertical size and lots of protruded chest ; Type III has big horizontal size, the mean vertical size, and big upper angle of the back ; Type II has small horizontal and vertical size and long surface length of the upper body. Through the discriminant analysis, the high discriminative items in discriminant function are follows: Upper chest circumference, arm length and waist front length of discriminant function I and waist depth, front length, back breadth, nipple to nipple breadth and upper chest circumference of discriminant function II have large coefficient values.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.62-69
• /
• 2015

Coastlines are protected by breakwater structures against the erosion of sand or other materials along beaches due to wave action. This research examined the use of physical modeling to determine the effects of the tetrapod size and vertical walls of a rubble mound on the volume of wave overtopping under irregular wave conditions in coastal areas in Busan Yacht Harbor. In this analysis model, the structures were studied using irregular waves and the JONSWAP wave energy spectrum. To understand the effects of the tetrapod size and heights of the vertical wall, the study considered vertical walls of 0, 1.78, 6.83, and 9.33 cm with armor double layered material tetrapods of 8, 12, 16, and 20 tons. An extensive number of experiments covering a relatively large range of variables enabled a comprehensive discussion. First, in the presence of a short vertical wall, the water level played a key role in the overtopping discharge. In such circumstances, the values of the wave overtopping discharge decreased with increasing freeboard size. In the presence of a tall freeboard and middle, the value of the wave overtopping discharge was equally influenced by the vertical wall factor. Moreover, the tetrapod size decreased by an increase in the vertical wall factor, and relationship between them resulted in a short wall height. From an engineering point of view, considering a small water level may allow the choice of a shorter vertical wall, which would ultimately provide a more economical design.

• 대한전자공학회논문지SD
• /
• 제44권10호
• /
• pp.33-37
• /
• 2007

본 논문에서는 vertical shunt symmetric inductor를 이용하여 CMOS LNA의 설계에 있어서 회로의 면적을 줄이는 설계기술 및 구현에 관한 내용을 제시하고자 한다. 본 연구에 있어서 vertical shunt symmetric inductor는 LNA의 입력단과 출력단을 3GHz로 정합하기 위해서 사용되었다. 이렇게 구현된 보다 면적에 있어서 효율적인 증폭기를 0.18um digital logic공정으로 구현되었다. 본 논문에서는 일반적으로 LNA에서 사용하고 있는 inductor를 이용하는 경우와, vertical shunt symmetric inductor를 이용하여 LNA를 설계하는 경우에 대한 부분을 비교하였고, 최종적으로 면적에 효율적인 회로설계 기술을 제시하고자 한다.

• 한국안광학회지
• /
• 제19권3호
• /
• pp.285-293
• /
• 2014

목적: 초등학생에서 일반인을 대상으로 가시홍채직경(수평, 수직) 및 검열의 폭과 길이를 측정하여 이들의 상관관계 및 소프트콘택트렌즈 크기의 연령별 적합성을 알아보고자 하였다. 방법: 안질환이 없고 외형적으로 미용을 포함한 눈 수술을 하지 않은 초등학생에서 일반인 총 514명(1028안)을 대상으로 가시홍채직경(수평, 수직)과 검열의 폭과 길이를 측정하고 분석하였다. 결과: 가시홍채수평직경과 수직직경은 연령별 남녀 간의 유의한 차이는 없었으나, 중학생과 대학생의 검열의 길이와 고등학생의 검열의 폭은 남학생과 여학생 간 유의한 차이가 있었다(p<0.05). 또한, 남녀 모두 가시홍채수평직경, 가시홍채수직직경, 검열의 길이 그리고 검열의 폭에서 연령별로 유의한 차이를 보였다. 가시홍채직경과 검열의 크기는 문헌에 기준한 정상범위 근사치보다 검열의 폭은 남녀를 포함한 전체 대상자의 27.9%, 가시홍채직경은 36.0%가 작은 것으로 나타났다. 결론: 가시홍채직경과 검열의 크기는 소프트콘택트렌즈의 직경 결정에 영향을 미치며, 특히 렌즈 삽입시 피검자의 불편함을 덜어주기 위해서 좀 더 세심하게 고려되어야 할 사항이라고 사료된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.457-464
• /
• 1999

The active earth pressure on the retaining wall is reduced by 3-Dimensional effects of the ground. Therefore, the test was focused on reducing the earth pressure on the retaining wall by inserting the vertical reinforcement in the backfill ground to develope the 3-Dimensional effects. Model tests in sand were peformed to measure the 3-Dimensional effects of the vertical reinforcement on the active earth pressure and its distribution and results were compared with the theories. The size of the vertical reinforcement, the geometry of the backfill space, and the wall friction of vertical reinforcement were varied. It was observed that the active earth pressure and its distribution on the underground structure were affected by the size of the vertical reforcements and wall friction.

• Wind and Structures
• /
• 제36권1호
• /
• pp.41-60
• /
• 2023

The effect of cladding panel size on the size reduction factor (SRF) of extreme area-averaging wind pressure (EAWP) on the facades of a high-rise building is often ignored in previous studies. Based on wind tunnel tests, this study investigated the horizontal and vertical correlations of wind pressure on the facade claddings of square-section high-rise buildings. Then, the influencing parameters on the SRF of the EAWP on the cladding panels were analyzed, which were the panel area, panel width, panel length and building width. The results show clear regional distinctions in the correlation of wind pressures on the building facades and the rules of the horizontal and vertical correlations are remarkably different, which causes the cladding size ratio to impact the SRF significantly. Therefore, this study suggests the use of the non-dimensional comprehensive size parameter b^𝜶h^1-𝜶/B (𝜶 is the fitting parameter) determined by the cladding panel horizontal size b, cladding panel vertical size h and the building width B rather than the cladding panel area to describe the variation of the EAWP. Finally, some empirical formula for the SRF of the EAWP on the cladding of a high-rise building is proposed with the nondimensional comprehensive size parameter.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.409-410
• /
• 2012

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.111-112
• /
• 2020

As buildings in South Korea become more skyscrapers, the risk of fire is also emerging. Thus, regulations, regulations, and guidelines are being improved to prevent the spread of smoke in the event of a fire in high-rise buildings, but research on smoke flow and pressure distribution in vertical spaces is insufficient. Therefore, in this study, the temperature of each floor in the vertical space according to the size of the fire is measured through the miniature model experiment, and the pressure difference is calculated to establish the basic data for the improvement of the performance of domestic air supply facilities in the future. Thus, a scale model of one-sixth the size of the actual building was produced to measure the temperature, and the pressure difference was derived by substituting the value for the expression. The pressure difference varies depending on the size of the cause of the fire, and it is believed that the differential pressure and conditions of the building should be taken into account before calculating the supply volume for the analysis of the pressure difference according to the size of the cause of the fire in the event of fire.