• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.5
• /
• pp.678-689
• /
• 2004

The purpose of this study was to analyze strategic alliances in fashion business in Korea and to describe the trends of alliances. Fashion business was divided into textile manufacturers, apparel manufacturers, retailers, and service businesses. Alliance cases were collected from articles in various sources of periodicals searched from data bases. A total of 247 alliance cases in fashion business from January 2000 to August 2003 were analyzed. Cases were categorized into horizontal alliances among competitors in the same distribution channel and vertical alliances with partners in a different channel within the fashion business and into alliances with partners outside the fashion business. The study described the patterns of each of the vertical and horizontal alliances within and between textile manufacturers, apparel manufacturers. and retailers as well as the alliances with service businesses outside the fashion business.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.2
• /
• pp.107-117
• /
• 2010

An analytical subthreshold swing model is presented for symmetric double-gate (DG) MOSFETs with Gaussian doping profile in vertical direction. The model is based on the effective conduction path effect (ECPE) concept of uniformly doped symmetric DG MOSFETs. The effect of channel doping on the subthreshold swing characteristics for non-uniformly doped device has been investigated. The model also includes the effect of various device parameters on the subthreshold swing characteristics of DG MOSFETs. The proposed model has been validated by comparing the analytical results with numerical simulation data obtained by using the commercially available $ATLAS^{TM}$ device simulator. The model is believed to provide a better physical insight and understanding of DG MOSFET devices operating in the subthreshold regime.

• Solar Energy
• /
• v.18 no.4
• /
• pp.39-47
• /
• 1998

The natural convection heat transfer in a vertical plate with discrete heat sources was studied experimentally. The particular interest was the thermal interaction of the heat sources. In this study, the radiative and conductive heat transfer were considered as heat loss, Thus, the net convective heat transfer rate was presented as adiabatic temperature and thermal wake function. As a results, for non-uniform heating condition, heat input ratio(q1/q2) was most dominant parameter for the thermal wake function. The convective heat transfer rate is decreased with the increasing of channel ratio. For the range of $7.50{\times}10^5<Rac<8.66{\times}10^6$, a useful correlation was proposed as a function of channel Rayleigh number.

• Advances in nano research
• /
• v.16 no.6
• /
• pp.579-591
• /
• 2024

This study explained the effects of radiation, magnetic field, and nanoparticle shape on the peristaltic flow of an Upper-Convected Maxwell nanofluid through a porous medium in an asymmetric channel for a better understanding of cooling and heating mechanisms in the presence of magnetic fields. These phenomena are modeled mathematically as a system of non-linear differential equations, that are solved under long-wavelength approximation and low Reynolds number conditions using the perturbation method. The results for nanofluid and temperature described the behavior of the pumping characteristics during their interaction with (the vertical position, thermal radiation, the shape of the nanoparticle, and the magnetic field) analytically and explained graphically. Also, the combined effects of thermal radiation parameters and some physical parameters on pressure rise, pressure gradient, velocity, and heat distribution are pointed out. Qualitatively, a reverse velocity appears with combined high radiation and Grashof number or combined high radiation and low volume flow rate. At high radiation, the spherical nanoparticle shape has the greatest effect on heat distribution.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.172-178
• /
• 2016

In this paper, we propose a sub-10 nm Ge/GaAs heterojunction-based tunneling field-effect transistor (TFET) with vertical band-to-band tunneling (BBT) operation for ultra-low-power (LP) applications. We design a stack structure that is based on the Ge/GaAs heterojunction to realize the vertical BBT operation. The use of vertical BBT operations in devices results in excellent subthreshold characteristics with a reduction in the drain-induced barrier thinning (DIBT) phenomenon. The proposed device with a channel length ($L_{ch}$) of 5 nm exhibits outstanding LP performance with a subthreshold swing (S) of 29.1 mV/dec and an off-state current ($I_{off}$) of $1.12{\times}10^{-11}A/{\mu}m$. In addition, the use of the highk spacer dielectric $HfO_2$ improves the on-state current ($I_{on}$) with an intrinsic delay time (${\tau}$) because of a higher fringing field. We demonstrate a sub-10 nm LP switching device that realizes a good S and lower $I_{off}$ at a lower supply voltage ($V_{DD}$) of 0.2 V.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.93-99
• /
• 1998

A novel four-channel narrowband wavelength demultiplexer using integrated four vertical directional coupler structures is proposed and theoretically investigated. Four ridge waveguide with different ridge width are vertically coupled to a strip-loaded waveguide which results four different wavelengths filtered out to each ridge waveguide. In order to reduce the side-lobes, the coupling coefficients are varied along the propagation direction. The spectral responses of channels were found to be quite uniform. An average channel spacing of 7 nm with power coupling efficiency of ~90%, 3-dB passband width of 2 nm, and 20 dB side-lobe suppression ratio was achieved.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.5
• /
• pp.410-415
• /
• 2012

An experimental study is carried out to investigate the near-wake characteristics of a NACA 0018 foil with a flat plate. Two-frame grey-level cross correlation PIV method is used to measure the local flow characteristic around a pitch damping foil to control the vertical motion of high speed crafts in a circulating water channel. The analysis also includes angles of attack 10 and 20 degrees respectively. Reynolds number $Re{\fallingdotseq}3.5{\times}10^4$ based on the chord length(C=100mm) of NACA0018 has been applied during the whole experiments. The distance between the foil and the flat plate is D/C=0.5, 1.0 and 1.5 respectively. The channel effect according as the distance between the foil and the flat plate has a close relation with the velocity distributions around the foil. In the wake of 20-degree of attack, the complex turbulent flow and a thick boundary layer are formed due to the processes of vortex generation and dissipation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.240-240
• /
• 2015

As Simpson et al. (1990) emphasized the importance of the straining process in the stratification and mixing in the estuarine circulation process, various researches have investigated on the relative contribution of each process to the overall potential energy anomaly dynamics. However, many numerical works have done only for two dimensional modeling along channel or the short distance cross sectional three dimensional simulations as Burchard et al. (2008) and the estuarine channel was not simulated so far. But, in the study on the physics of shallow coastal seas, spatial dimension in the three dimensional way affects significantly on results of a particular numerical model. Therefore, the comparison of two and three dimensional models is important to understand the real physics of mixing and stratification in an estuary. Also, as Geyer and MacCready (2013) pointed out that the lateral process seems to be important in determining the periodic stratifications, to study such process the three dimensional modeling must be required. The present study uses a numerical model to show the signification roles of each term of the time-dependent dynamic equation for the potential energy anomaly (PEA) in controlling along and lateral channel flows and different stratification structures. Moreover, we present the relationships between the ${\Phi}$-advection, the depth mean straining, vertical mixing and vertical advection can explain well how water level, salinity distribution and across velocity 2D model are slightly different from 3D.

• Journal of computational fluids engineering
• /
• v.7 no.3
• /
• pp.53-59
• /
• 2002

A two-dimensional laminar flow through a channel with a pair of symmetric vertical fins is investigated. At far up- and down-stream from the fins, the plane Poiseuille flow exists in the channel. The Stokes flow for this channel is first investigated analytically and then the other laminar flows by numerical method. For analytic method, the method of eigen function expansion and collocation method are employed. In numerical solution for laminar flows, finite difference method(FDM) is used to obtain vorticity and stream function. From the results, the streamline patterns are shown and the additional pressure drop due to the attached fins and the force exerted on the fin are calculated. It is clear that the force depends on the length of fins and Reynolds number. When the Reynolds number exceeds a critical value, the flow becomes asymmetric. This critical Reynolds number Re/sub c/ depends on the length of the fins.

• Journal of Distribution Research
• /
• v.2 no.1
• /
• pp.59-85
• /
• 1997

The automobile industry in Korea has grown to the fifth in the world in terms of production capacity. In spite of the production growth, the marketing aspects such as distribution and customer service in the auto industry are still behind the world-class. Thus, the major purposes of this paper are as follows. The first is to analyze competitive structure of the industry and to compare distribution strategies of the major auto firms(Hyundai, Daewoo, and Kia). The second is to theoretically explain the transition from the vertical marketing system to the dealer system using transaction cost analysis. The third is to compare auto distribution channels in Korea with those in the U.S. and Japan. Finally, an optimal channel stucture in the auto industry is suggested after reviewing five alternative channel structures such as corporate-owned VMS, sales-specializing firm, multiplex system(VMS+limited dealer system), dual sales channel, and advanced dealer system. In the short-run, sales-specilizing firm was suggested as an optimal channel system to enhance customer satisfaction by integrating sales and customer service. In the long-run, advanced dealer system through regional differentiation was desirable for an optimal channel structure by organically integrating new car sales, used car sales, and after service to provide total marketing service to customers.