• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.70-76
• /
• 2002

Effectiveness of corrective machining algorithm is verified experimentally in this paper by performing corrective machina work practically to single side and double sides hydrostatic tables. Lapping is applied as machining method. Machining information is calculated from measured motion errors by applying the algorithm, without information on rail profile. It is possible to acquire 0.13$\mu$m of linear motion error, 1.40arcsec of angular motion error in the case of single side table, and 0.07$\mu$m of linear motion error, 1.42arcsec of angular motion error in the case of double sides table. The experiment is performed by an unskilled person after he experienced a little of preliminary machining training. Experimental results show that corrective machining algorithm is very effective, and anyone can improve the accuracy of hydrostatic table by using the algorithm.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.2
• /
• pp.29-35
• /
• 2017

In this paper, we present a 5W1H programming model for IT non-experienced people who are not familiar with computer programming and those who need programming education. Based on this model, we can design a development tool that can be easily programmed by beginners. This development tool is a programming method applying the 5W1H concept and constructs a sentence to satisfy the control condition of 'Who, When, Where, What, and How', which is the sentence element of 5W1H. Therefore, the user can easily develop the target system as if constructing the sentence without learning the programming language of the target system. In this paper, to verify the effectiveness of the 5W1H programming model proposed in this paper, we applied the concept of 5W1H programming to Arduino and developed the development tool and performed the first verification and applied the second verification to the speech recognition smart home development platform.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.526-534
• /
• 2016

A MEMS solid propellant thruster array shall be operated within an allowable range of operating temperatures to avoid ignition failure by incomplete combustion due to a time delay in ignition. The structural safety of the MEMS thruster array under severe on-orbit thermal conditions can also be guaranteed by a suitable thermal control. In this study, we propose a thermal control strategy to perform on-orbit verification of a MEMS thruster module, which is expected to be the primary payload of the STEP Cube Lab mission. The strategy involves, the use of micro-igniters as heaters and temperature sensors for active thermal control because an additional heater cannot be implemented in the current design. In addition, we made efforts to reduce the launch loads transmitted to the MEMS thruster module at the system level structural design. The effectiveness of the proposed thermo-mechanical design strategy has been demonstrated by numerical analysis.

• Journal of Aerospace System Engineering
• /
• v.10 no.2
• /
• pp.14-21
• /
• 2016

In this study, we proposed a water rocket CULV-1 (Chosun University Launch Vehicle-1). Unlike a conventional water rocket, CULV-1 can perform the booster rocket, fairing, and payload separation like an actual launch vehicle and also the imaging data acquisition. The conceptual and critical design of the proposed CULV-1 have been performed considering the operation characteristics. The verification tests have been performed from subsystem to system level in accordance with the established test specifications and verification procedures. Through the final launch test of the flight model, we have verified the design effectiveness of the proposed separation mechanisms for water rocket applications and the mission requirements of the CULV-1 also have been complied.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.3
• /
• pp.62-68
• /
• 2004

Effectiveness of a corrective machining algorithm, which can construct the proper machining information to improve motion errors utilizing measured motion errors, is verified experimentally in this paper, Corrective machining process is practically applied to single and double side hydrostatic bearing tables. Lapping process is applied as a machining method. The machining information is obtained from the measured motion errors by applying the algorithm, without any information on the rail profile. In the case of the single-side table, after 3 times of corrective remachining, linear and angular motion errors are improved up to 0.13 $\mu\textrm{m}$ and 1.40 arcsec from initial error of 1.04 $\mu\textrm{m}$ and 22.71 arcsec, respectively. In the case of the double-side table, linear and angular motion error are improved up to 0.07 /$\mu\textrm{m}$ and 1.42 arcsec from the initial error of 0.32 $\mu\textrm{m}$ and 4.14 arcsec. The practical machining process is performed by an unskilled person after he received a preliminary training in machining. Experimental results show that the corrective machining algorithm is very effective and easy to use to improve the accuracy of hydrostatic tables.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.2
• /
• pp.165-174
• /
• 2021

This study describes a method of measurement and verification of array manifold of uniform circular array antenna applicable to multistatic Passive Coherent Location(PCL) system using FM broadcasting. In an environment of outdoor test where FM broadcast signals are scattered, array manifold measurement methods using network analyzer and multi-channel digital receiver are introduced. Also, the descriptions and solutions for the test limits of each measurement method and the considerations affecting the measurement accuracy are presented. In addition, to verify the validity of the measured array manifold, the gain and phase difference were compared with the array manifold data obtained by EM simulation, and the effectiveness and accuracy of the measured array manifolds were compared and analyzed by estimating the direction of arrival of the FM broadcast signal received from the multistatic PCL system.

• Industrial Engineering and Management Systems
• /
• v.6 no.2
• /
• pp.94-105
• /
• 2007

Measurement technology plays an important role in discrete manufacturing industry. Probe-type coordinate measuring machines (CMMs) are normally used to capture the geometry of part features. The measured points are then fit to verify a specified geometry by using the least squares method (LSQ). However, it occasionally overestimates the tolerance zone, which leads to the rejection of some good parts. To overcome this drawback, minimum zone approaches defined by the ANSI Y14.5M-1994 standard have been extensively pursued for zone fitting in coordinate form literature for such basic features as plane, circle, cylinder and sphere. Meanwhile, complex features such as torus have been left to be dealt-with by the use of profile tolerance definition. This may be impractical when accuracy of the whole profile is desired. Hence, the true deviation model of torus is developed and then formulated as a minimax problem. Next, a relatively new and simple population based evolutionary approach, particle swarm optimization (PSO), is applied by imitating the social behavior of animals to find the minimum tolerance zone torusity. Simulated data with specified torusity zones are used to validate the deviation model. The torusity results are in close agreement with the actual torusity zones and also confirm the effectiveness of the proposed PSO when compared to those of the LSQ.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.120-124
• /
• 2010

This paper presents a method that can automatically detect variety of degradations (i.e., scratches and blotches) in old film archive. The proposed method consists of candidate detection and verification. Degradations are first identified by finding the local extreme of a frame in spatiotemporal domains, thereby using edge detector and SROD detector. Then, to remove some false alarms occurred in the first stages, the verification is performed using the texture and shape properties of scratches and blotches. The textural properties of scratches and blotches are learned using neural networks (NNs) and their shapes are represented using morphological filters. The experiments were performed on several old films, then the results demonstrated the effectiveness of the proposed method, where it has a precision of 81% and a recall of 79%.

• International Commerce and Information Review
• /
• v.10 no.4
• /
• pp.495-512
• /
• 2008

Because Korea and Japan has joined WTO and OECD, it is impossible to carry out a direct export-promoted policy such as export subsidies. Therefore, the only policy which is internationally valid for promoting an export is the export insurance. Hence export insurance system became more useful tool since it's one of the few allowed subsidies under WTO. This paper examines to find the impacts of export insurance on the export supply in Korea and Japan. The period of data is from 1980 to 2006. Unlike previous studies on the effectiveness of export subsidy in export supply, the current study examines the stationarity nature of the concerned variables. The unit root tests show that all variables are not I(0) Time Series. Instead, they are I(1) Time Series. To this, cointegration verification was conducted based on the use of Johansen verification method to define the existence (or non-existence) of long-term balance relationship among variables. The concerned variables are revealed to be cointegrated. In order to analyze, this study introduce a VEC model. In this paper we construct two VEC models. The one is about Korea, the other is about Japan. The empirical evidences show that export insurance system has not contributed to promoting export supply in Japan. But the results of empirical analysis showed significant and positive effects of Korea export insurance upon the export supply.

• Journal of Navigation and Port Research
• /
• v.45 no.4
• /
• pp.181-185
• /
• 2021

This study deals with the development of a phrase buoy control system that can receive and analyze phrase information using an IoT-based communication network to determine whether a phrase is normal or missing, to manage the current state of the phrase, check the status of the phrase in case of abnormal conditions in the phrase, and conduct management of the phrase. The fishing gear management system and integrated control structure design using an IoT-based communication network were developed, and a system test and verification were carried out to verify the effectiveness of the system.