• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1091-1094
• /
• 2005

This paper formulates the parameter estimation of cornering behavior of a vehicle. Especially some vehicle parameter is very important on stability control of chassis by ECU, but some parameter is so hard to get by sensor which parameter is included the nonlinear characteristic of tire cornering force. So we need to deduce that parameter from used signal and numerical method. In this study, we propose a estimation method and present the simulation by parameter estimation technique.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.565-570
• /
• 2001

Vehicle dynamics control (VDC) system requires more information on driving conditions compared with ABS and/or TCS. In order to develop the VDC system, tire slip angles, vehicle side-slip angle, and vehicle lateral velocity as well as road friction coefficient are needed. Since there are not any cheap and reliable sensors, recent researches on parameter estimation have given rise to a number of parameter estimation techniques. This paper presents new vehicle model to estimate vehicle's yaw rate. This model is improved from the conventional 2 degrees of freedom vehicle model, so-called bicycle model, taking nonlinear effects into account. These nonlinear effects are: (i) tyre nonlinearity; (ii) lateral load transfer during cornering; (iii) variable gear ratio with respect to vehicle velocity. Estimation results are validated with the experimental results.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.575-582
• /
• 2019

Advanced driving assist system can support safety of driver and passengers which may require vehicle dynamics states as well as road geometry. It is essential to have in real-time estimation of related variables and parameters. Among the road geometry parameters, road slope angle which can not be measured is essential parameter in pose estimation, adaptive cruise control and others on sag road. In this paper, Kalman filter based method for the estimation of the vehicle dynamics and road slope angle using a nonlinear vehicle model is proposed. It uses a combination of Kalman filter as Cascade Extended Kalman Filter. CEKF uses measured vehicle states such as yaw rate, longitudinal/lateral acceleration and velocity. Unknown vehicle parameters such as center of gravity and inertia are obtained by 2 D.O.F lateral model and experimentally. Simulation and Experimental tests conducted with commercialized vehicle dynamics model and real-car.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.3
• /
• pp.21-26
• /
• 2010

This paper deals with the precise parameter estimation of an air vehicle without a priori information. First, Recursive Least Squares technique, which is an equation error method and does not require any a priori information, is applied and then the extended Kalman filter is used to tune parameters more precisely. To show the performance, a nonlinear longitudinal missile model is simulated and the parameters are estimated. The results show that this consecutive application of the techniques gives a very good estimation performance.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.112-118
• /
• 2000

This paper deals with the application of sensitivity method to the parameter estimation for the dynamic analysis of gener-al mechanical system. In this procedure we take the derivatives of the given system with respect to a certain parameter and use this information to implement the steepest descent method. This paper will give two examples of this technique applied to simple vehicle models. This paper will give two examples of this technique applied to simple vehicle models. Simulation results show excellent convergence and accuracy of parameter estimates.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.208-214
• /
• 2014

Vehicle dynamic states used in various advanced driving safety systems are influenced by road geometry. Among the road geometry information, the vehicle pitch angle influenced by road slope and acceleration-deceleration is essential parameter used in pose estimation including the navigation system, advanced adaptive cruise control and others on sag road. Although the road slope data is essential parameter, the method measuring the parameter is not commercialized. The digital map including the road geometry data and high-precision DGPS system such as DGPS(Differential Global Positioning System) based RTK(Real-Time Kinematics) are used unusually. In this paper, low-cost cascade extended Kalman filter(CEKF) based road slope estimation method is proposed. It use cascade two EKFs. The EKFs use several measured vehicle states such as yaw rate, longitudinal acceleration, lateral acceleration and wheel speed of the rear tires and 3 D.O.F(Degree Of Freedom) vehicle dynamics model. The performance of proposed estimation algorithm is evaluated by simulation based on Carsim dynamics tool and T-car based experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.766-771
• /
• 1992

The hydrodynamic coefficients estimation problem is important to develop an underwater vehicle and design a controller for it. In this paper, an identification theory, the Extended Kalman Filter, is applied to this parameter estimation problem. In the case that a process noise is not used, all of the parameters are almost exactly converged to the true values respectively. When a process noise is used, all of the parameters are converged to the true values, too, although some parameter estimates are slightly biased. The comparisons of the two trajectories between those generated by the true parameters and those by the estimated parameters show that the parameter estimation problem is well-solved.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.611-615
• /
• 1991

A technique for estimation of the hydrodynamic parameter of an underwater vehicle is presented. An extended, augmented Kalman Filter is used to extract the hydrodynamic parameter. Computer generated data were used for the measurement information in lieu of actual run data. The feasibility of identifying values of the hydrodynamic parameter of an underwater vehicle is studied. Computer simulation are done in order to validate the performance of the proposed algorithm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.1
• /
• pp.124-130
• /
• 2001

This paper presents a methodology on automation of a trailer type vehicle which consists of two parts: a tractor and a trailer. Backward moving and parking control is very important to automate this type of vehicle. It is difficult to control the motion such a trailer vehicle whose dynamics in non-holonomic. Therefore, in this paper, the modeling and parameter estimation of the system using a RCGA(real-coded genetic algorithm) is proposed and a backward path tracking control algorithm is then obtained. The simulation results verify the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1432-1435
• /
• 1997

This paper proposes a fault detection and isolation metho by combining the parameter estimation method[4] with the observer method[2] to use merits of both methods. To verify the performance of the method proposed some simulations applied to remotely piloted vehicle are performed.