• Steel and Composite Structures
• /
• 제29권3호
• /
• pp.333-348
• /
• 2018

An analytical method is developed for analysing the contact buckling response of infinitely long, thin corrugated plates and flat plates restrained by a Winkler tensionless foundation and subjected to linearly varying in-plane loadings, where the corrugated plates are modelled as orthotropic plates and the flat plates are modelled as isotropic plates. The critical step in the presented method is the explicit expression for the lateral buckling mode function, which is derived through using the energy method. Simply supported and clamped edges conditions on the unloaded edges are considered in this study. The acquired lateral deflection function is applied to the governing buckling equations to eliminate the lateral variable. Considering the boundary conditions and continuity conditions at the border line between the contact and non-contact zones, the buckling coefficients and the corresponding buckling modes are found. The analytical solution to the buckling coefficients is also expressed through a fitted approximate formula in terms of foundation stiffness, which is verified through previous studies and finite element (FE) method.

• 한국수자원학회논문집
• /
• 제33권6호
• /
• pp.805-814
• /
• 2000

본 연구에서는 경계요소법을 이용하여 수심이 변하는 지형을 통과할 때 발생하는 파랑의 회절을 수치해석하였다. 먼저, 트렌치지형을 통과하는 파랑의 반사율과 통과율을 계산하였으며 고유함수전개법에 의한 결과와 비교하여 본 모형을 검증하였다. 아울러, 경계요소법을 정현파형 지형에 적용하여 반사율 및 Bragg 반사를 연구하였다. 수치해석에 의한 반사율은 수리모형실험에 의한 관측결과 및 고유함수전개법에 의한 결과와 비교하였다. 전체적으로 본 연구의 결과는 기존의 자료와 잘 일치하였다.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.111-117
• /
• 2005

The vibration problems associated with gear coupled rotors have been the focus of much engineering work. These systems are complex and difficult to analyze in that they have the problems associated with conventional rotors plus those additional problems associated with the gear couplings. This paper examines the problems peculiar to the gear mesh. Because of the meshing action of gears, the elasticity of the gear teeth introduces time-varying stiffness coefficients into the governing equations of motion. This means that system response must be thought of in terms of Mathieu-type equations, where multiple-frequency response occur due to the periodic coefficients. The meshing action of the gears also couples the lateral and torsional gear motions. Gear errors, such as tooth profile and spacing errors, produce forces and torque that excite the system at multiple frequencies, some of which are much higher than shaft rotational speed. To investigate how to the time-varying stiffness in the gear teeth and the gear errors act one the dynamic response of the gear coupled rotors, a three-dimensional dynamic model with lateral-tortional oscillation is developed. The harmonic balance technique is employed to solve this mathieu-type problem.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.71-83
• /
• 2020

Cantilever sheet pile walls are subjected to surcharge loading located on the backfill soil and at different distances from the top of the wall. The response of cantilever sheet pile walls to surcharge loadings at varying distances under seismic conditions is scarce in literature. In the present study, the influence of uniform surcharge load on cantilever sheet pile wall at varying distances from the top of the wall under seismic conditions are analyzed using finite difference based computer program. The results of the numerical analysis are presented in non-dimensional form like variation of bending moment and horizontal earth pressure along the depth of the sheet pile walls. The numerical analysis has been conducted at different magnitudes of horizontal seismic acceleration coefficient and vertical seismic acceleration coefficients by varying the magnitude and position of uniform surcharge from the top of the wall for different embedded depths and types of soil. The parametric study is conducted with different embedded depth of sheet pile walls, magnitude of surcharge on the top of the wall and at a distance from the top of the wall for different angles of internal friction. It is observed that the maximum bending moment increases and more mobilization of earth pressure takes place with increase in horizontal seismic acceleration coefficients, magnitude of uniform surcharge, embedded depth and decrease in the distance of surcharge from the top of the wall in loose sand.

• 한국경영과학회지
• /
• 제34권4호
• /
• pp.15-26
• /
• 2009

Bass diffusion model have played a central role in studying the diffusion of the new products since 1969, the year of publication of Bass model. Almost 750 publications based on the Bass diffusion model have explored extensions and applications. Extension models can be divided into two types. One is the model containing marketing-mix variables and the other is the model containing additional parameters. This paper presents another extension model of the latter type. Our model allows the time varying coefficients of innovation and imitation. Two pieces approximation of time varying coefficients is introduced and it's parameters are estimated based on NLS(Non-Linear Mean Square) method. Empirical studies are performed and the results show that our model is superior to the basic Bass model and the NUI(Non-Uniform Influence) model which is the well-known extension of the Bass model. The model developed in this paper is, also, transformed into the Bass model with the ready potential adopters in order to enhance the descriptive power.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.860-863
• /
• 2002

Realizations of multirate converters are proposed using periodically time-varying (PTV) structures. By exploiting the computational redundancy of the filtering operation in a multirate filter, it is possible to implement the filter with much less hardware. In the proposed implementations, several coefficients time-share in a periodic fashion the hardware of one multiply-and-add. Therefore, each multiply-and-add circuit performs different coefficient scalings at different time instants within a period. Compared to the direct form realization, the proposed realizations reduce the hardware of an interpolator and a decimator by a factor of approximately U and M, respectively, while retaining the same processing speed, where U and M are the upsampling and downsampling factors, respectively. The approach can be used to obtain realizations for sampling rate conversion by a rational factor of U/M, where U and M are relatively prime, in which case hardware reduction by a factor of approximately UM can be achieved.

• Fisheries and Aquatic Sciences
• /
• 제10권3호
• /
• pp.159-169
• /
• 2007

The complex 2-dimensional movements of fish during an annual migration circuit were generated and simulated by a chaotic model of fish movement, which was expanded from a small-scale movement model. Fish migration was modeled as a neural network including stimuli, central decision-making, and output responses as variables. The input stimuli included physical stimuli (temperature, salinity, turbidity, flow), biotic factors (prey, predators, life cycle) and landmarks or navigational aids (sun, moon, weather), values of which were all normalized as ratios. By varying the amplitude and period coefficients of the klinokinesis index using chaotic equations, model results (i.e., spatial orientation patterns of migration through time) were represented as fish feeding, spawning, overwintering, and sheltering. Simulations using this model generated 2-dimesional annual movements of sea bream migration in the southern and western seas of the Korean Peninsula. This model of object-oriented and large-scale fish migration produced complicated and sensitive migratory movements by varying both the klinokinesis coefficients (e.g., the amplitude and period of the physiological month) and the angular variables within chaotic equations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.995-1000
• /
• 2004

A digital adaptive flight control system is presented for a Japanese automatic landing flight experiment vehicle (ALFLEX). In previous adaptive control systems based on a linear-parameter-varying (LPV) form, the output behavior was excellent, while the behavior of the adjusted parameters was unsatisfactory. In the present study, to obtain a more appropriate parameter adjustment law, the relationship between the coefficient matrices in a continuous-time state equation and the coefficients of a pulse transfer function in a discrete system for conventional aircraft is investigated. As a result, it is revealed that the coefficients of the numerator can be treated as a linear function of dynamic pressure (linear-parameter-varying: LPV), while the coefficients of the denominator can be treated as constant (linear-time-invariant: LTI). From the above analysis, an improved parameter adjustment law is derived by reducing the number of the adjustment parameters. Simulation results also revealed both good output tracking and good parameter adjustment compared with the previous results.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.15-26
• /
• 2014

This paper proposes a Modified Particle Swarm Optimization with Time Varying Acceleration Coefficients (MPSO-TVAC) for solving economic load dispatch (ELD) problem. Due to prohibited operating zones (POZ) and ramp rate limits of the practical generators, the ELD problems become nonlinear and nonconvex optimization problem. Furthermore, the ELD problem may be more complicated if transmission losses are considered. Particle swarm optimization (PSO) is one of the famous heuristic methods for solving nonconvex problems. However, this method may suffer to trap at local minima especially for multimodal problem. To improve the solution quality and robustness of PSO algorithm, a new best neighbour particle called 'rbest' is proposed. The rbest provides extra information for each particle that is randomly selected from other best particles in order to diversify the movement of particle and avoid premature convergence. The effectiveness of MPSO-TVAC algorithm is tested on different power systems with POZ, ramp-rate limits and transmission loss constraints. To validate the performances of the proposed algorithm, comparative studies have been carried out in terms of convergence characteristic, solution quality, computation time and robustness. Simulation results found that the proposed MPSO-TVAC algorithm has good solution quality and more robust than other methods reported in previous work.

• 산업공학
• /
• 제24권3호
• /
• pp.220-230
• /
• 2011

The multi-reservoir operation problem for efficient utilization of water resources involves conflicting objectives, and the problem can be solved by varying weight coefficient on objective functions. Accordingly, decision makers need to choose appropriate weight coefficients balancing the trade-offs among multiple objectives. Although the appropriateness of the weight coefficients may depend on the total amount of water inflow, reservoir operating policy may not be changed to a certain degree for different hydrological conditions on inflow. Therefore, we propose to use fuzzy Data Envelopment Analysis (DEA) to rank the weight coefficients in consideration of the inflow variation. In this approach, we generate a set of Paretooptimal solutions by applying different weight coefficients on Coordinated Multi-reservoir Operating Model. Then, we rank the Pareto-optimal solutions or the corresponding weight coefficients by using Fuzzy DEA model. With the proposed approach, we can suggest the best weight coefficients that can produce the appropriate Pareto-optimal solution considering the uncertainty of inflow, whereas the general DEA model cannot pinpoint the best weight coefficients.