Browse > Article

A Study on Dynamic Characteristics of Gear-System  

Lee, Hyoung-Woo (부산대학교 기계기술연구소)
Park, No-Gill (부산대학교 기계공학부)
Publication Information
Journal of the Korean Society for Precision Engineering / v.22, no.11, 2005 , pp. 111-117 More about this Journal
Abstract
The vibration problems associated with gear coupled rotors have been the focus of much engineering work. These systems are complex and difficult to analyze in that they have the problems associated with conventional rotors plus those additional problems associated with the gear couplings. This paper examines the problems peculiar to the gear mesh. Because of the meshing action of gears, the elasticity of the gear teeth introduces time-varying stiffness coefficients into the governing equations of motion. This means that system response must be thought of in terms of Mathieu-type equations, where multiple-frequency response occur due to the periodic coefficients. The meshing action of the gears also couples the lateral and torsional gear motions. Gear errors, such as tooth profile and spacing errors, produce forces and torque that excite the system at multiple frequencies, some of which are much higher than shaft rotational speed. To investigate how to the time-varying stiffness in the gear teeth and the gear errors act one the dynamic response of the gear coupled rotors, a three-dimensional dynamic model with lateral-tortional oscillation is developed. The harmonic balance technique is employed to solve this mathieu-type problem.
Keywords
Gear errors; Tooth profile; Oscillation; Harmonic Balance; Time varying stiffness;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Lee, H.W, Park, N.G, 'A Study on Development of Railway Reducer for Low Noise/Vibration,' Journal of the Korean Society of Precision Engineering, Vol. 21, No. 2, pp. 130-137, 2004   과학기술학회마을
2 Rao, J.S., Rotor Dynamics, John Wiley & Sons, pp. 141-156, 1983
3 Lee, Hyoung Woo and Park, No Gill, ' A Study on Development of Railway Reducer for Low Noise/Vibration,' Journal of the Korean Society of Precision engineering, Vol. 21. No. 2, pp. 130-137, 2004   과학기술학회마을
4 Coy, J.J., 'Identification and Proposed Control of Helicopter Transmission Noise at the Sourse,' USAAVSCOM-TR-87-C-2, 1987
5 Mitchell, L.D., Daws, J.W., 'A Basic Approach to Gearbox Noise Prediction,' Transactions of SAE, Vol. 91, pp. 3366-3379, 1983
6 Mitchell, L.D., David, J.W., 'Proposed Solution Methodology for the Dynamically Coupled Nonlinear Geared Rotor Mechanics Equations,' ASME, J. of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 107, pp. 112-116, 1985   DOI   ScienceOn
7 Ishida, K., Matsuda, T., 'Effect of Tooth Suraface Roughness on Gear Noise and Gear Noise transmission Path,' ASME Paper C2/Det-70, 1980
8 Cornell, R.W., 'Compliance and Stress Sensitivity of Spur Gear Teeth,' ASME Paper C2/DET-24, 1980
9 Neriya, S.V., Bhat, R.B., Sanka, T.S., 'Vibration of A Geared Train of Rotors with Tortional-Flexural Coupling,' ASME Paper DET-209, 1984
10 Inoute, Y., Seireg, A., 'Simulation of Dual Drive branched Gear Systems during selective Engagement of the Prime movers,' ASME Paper DET-209, 1984
11 Albrecht, C., 'developments in Gear Analysis and Test Techniques for Helicopter Drive Systems,' ASME Paper DET-15, 1979
12 Mitchell, L.D., Mellen, D.M., 'Torsional-Lateral Coupling in A Geared, High Speed Rotor System,' ASME Paper DET-75, 1975
13 Lynch, G.A., Mitchell, L.D., 'Origin of Noise,' Machine Design, Vol. 41, No. 10, pp. 174-178, 1969
14 Chakraborty J., Hunashikatti, H.G., 'Determination of the Combined Mesh Stiffness of a Spur Gear Pair under Load,' ASME Paper DET-39, 1974
15 Choi, M.J., 'The Combined Mesh Stiffness Charateristics of Spur and Helical Gears,' M.S Thesis, Mech. Eng. Dept., North Carolina State University, Raleigh, N.C., pp. 59-60, 1987
16 kasuba, R., August, R. 'gear Mesh Stiffness and LoadShearing in Plantary Gearing,' ASME paper DET-229, 1984
17 Toda, A., Tordion, G.V., 'Approximation of Gear Transmission Error by Standard Gear Errors,' ASME Paper C2/Det-71, 1980