• 공업화학
• /
• 제17권3호
• /
• pp.327-330
• /
• 2006

Si nanodot 배열을 형성하기 위하여 $NbO_{x}$ nanopillar를 건식식각 공정의 식각마스크로써 이용하기 위한 가능성이 조사되었다. $NbO_{x}$ nanopillar는 Al과 Nb의 양극산화 공정을 이용하여 준비되었다. $NbO_{x}$ nanopillar의 식각속도와 식각프로파일은 고밀도 플라즈마를 이용한 반응성 이온 식각법에 의해서 식각가스의 농도와 coil rf power, 그리고 dc bias voltage를 각각 변화시키면서 조사 되었다. $Cl_{2}$ 가스의 농도가 증가할수록 $NbO_{x}$ nanopillar의 식각속도는 감소하였고 coil rf power와 dc bias voltage의 증가는 식각속도의 상승을 초래했다. 선택된 식각조건에서 식각시간을 변화하여 $NbO_{x}$ nanopillar의 식각특성 및 식각메커니즘이 조사되었다.

• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.47-52
• /
• 2007

Organic field-effect transistors (OFETS) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with varying channel length. The CuPc FET device was made a top-contact type and the channel length was a $100\;{\mu}m,\;50\;{\mu}m,\;40\;{\mu}m,\;and\;30\;{\mu}m$ and the channel width was a fixed at 3 mm. We observed a typical current-voltage (I-V) characteristics in CuPc FET with varying channel length (L) and we calculated the effective mobility. Also, we measured a capacitance-voltage (C-V) by applied bias voltage with varying frequency at 43, 100, 1000 Hz.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.424-433
• /
• 2001

We present a new electrostatic repulsive-force microactuator using a lateral repulsive force induced by an asymmetric distribution of electrostatic field. The lateral repulsive force has been characterized by a simple analytical equation, derived from a finite element simulation. A set of repulsive force polysilicon microactuators has been designed and fabricated by a 4-mask surface-micromachining process. Static and dynamic micromechanical behavior of the fabricated microactuators has been measured at the atmospheric pressure for a varying bias voltage. The static displacement of the fabricated microactuator, proportional to the square of the DC bias voltage, is obtained as 1.27 $\mu\textrm{m}$ for the DC bias voltage of 140V. The resonant frequency of the repulsive-force microactuator increases from 11.7 kHz to 12.7 kHz when the DC bias voltage increases from 60V to 140V. The measured quality-factor varies from 12 to 13 for the bias volatge range of 60V∼140V. The characteristics of the electrostatic repulsive-force have been discussed and compared and compared with those of the conventional electrostatic attractive-force.

• 한국표면공학회지
• /
• 제46권1호
• /
• pp.29-35
• /
• 2013

The effect of DC bias on the growth of nanocrystalline diamond films on silicon substrate by microwave plasma chemical vapor deposition has been studied varying the substrate temperature (400, 500, 600, and $700^{\circ}C$), deposition time (0.5, 1, and 2h), and bias voltage (-50, -100, -150, and -200 V) at the microwave power of 1.2 kW, working pressure of 110 torr, and gas ratio of Ar/1%$CH_4$. In the case of low negative bias voltages (-50 and -100 V), the diamond particles were observed to grow to thin film slower than the case without bias. Applying the moderate DC bias is believed to induce the bombardment of energetic carbon and argon ions on the substrate to result in etching the surfaces of growing diamond particles or film. In the case of higher negative voltages (-150 and -200 V), the growth rate of diamond film increased with the increasing DC bias. Applying the higher DC bias increased the number of nucleation sites, and, subsequently, enhanced the film growth rate. Under the -150 V bias, the height (h) of diamond films exhibited an $h=k{\sqrt{t}}$ relationship with deposition time (t), where the growth rate constant (k) showed an Arrhenius relationship with the activation energy of 7.19 kcal/mol. The rate determining step is believed to be the surface diffusion of activated carbon species, but the more subtle theoretical treatment is required for the more precise interpretation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1568-1570
• /
• 2009

Nanocrystalline silicon thin films were deposited using an internal-type inductively coupled plasma-chemical vapor deposition at room temperature by varying the bias power to the substrate and the structural characteristics of the deposited thin film were investigated. The result showed that the crystalline volume fraction was decreased with the increase of bias power. At the low bias power range of 0~60 W, the compress stress in the deposited thin film was in the range of -34 ~ -77 Mpa which is generally lower than the residual stress observed for the nanocrystalline silicon thin films deposited by capacitively coupled plasma.

• Journal of Communications and Networks
• /
• 제14권5호
• /
• pp.540-545
• /
• 2012

In this paper, the lagged cross-correlation of two probability density functions constructed by kernel density estimation is proposed, and by maximizing the proposed function, adaptive filtering algorithms for supervised and unsupervised training are also introduced. From the results of simulation for blind equalization applications in multipath channels with impulsive and slowly varying direct current (DC) bias noise, it is observed that Gaussian kernel of the proposed algorithm cuts out the large errors due to impulsive noise, and the output affected by the DC bias noise can be effectively controlled by the lag ${\tau}$ intrinsically embedded in the proposed function.

• 한국군사과학기술학회지
• /
• 제19권2호
• /
• pp.155-162
• /
• 2016

TASS(Towed Array Sonar System) is a sonar system which tows the sensor array behind a platform. Array shape is generally assumed to be a straight line. But the array shape is often distorted by oceanic current or platform maneuvering which causes the performance loss of signal processing method like beamforming. So array shape estimation methods are needed. Typically the method based on Kalman filter using heading sensor is used. In practice, the measurement is corrupted by biases which are caused by rotation of the tow cable, varying magnetic fields and slowly varying stresses in the mechanical construction. Although they can't be calibrated but can be estimated. In this paper, we suggest the array shape estimation method based on Kalman filter compensating the sensor biases.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권2호
• /
• pp.159-169
• /
• 2019

Objective: Models for genomic selection assume that the reference population is an unselected population. However, in practice, genotyped individuals, such as progeny-tested bulls, are highly selected, and the reference population is created after preselection. In dairy cattle, the intensity of selection is higher in males than in females, suggesting that cows can be added to the reference population with less bias and loss of accuracy. The objective is to develop formulas applied to any genomic prediction studies or practice with preselected animals as reference population. Methods: We developed formulas for calculating the reliability and bias of genomically enhanced breeding values (GEBV) in the reference population where individuals are preselected on estimated breeding values. Based on the formulas presented, deterministic simulation was conducted by varying heritability, preselection percentage, and the reference population size. Results: The number of bulls equal to a cow regarding the reliability of GEBV was expressed through a simple formula for the reference population consisting of preselected animals. The bull population was vastly superior to the cow population regarding the reliability of GEBV for low-heritability traits. However, the superiority of reliability from the bull reference population over the cow population decreased as heritability increased. Bias was greater for bulls than cows. Bias and reduction in reliability of GEBV due to preselection was alleviated by expanding reference population. Conclusion: Cows are easier in expanding reference population size compared with bulls and alleviate bias and reduction in reliability of GEBV of bulls which are highly preselected than cows by expanding the cow reference population.

• 대한전자공학회논문지
• /
• 제22권5호
• /
• pp.93-101
• /
• 1985

다양한 채널 길이와 임의의 인가전압하의 MOS 트랜지스터를 2차원적으로 시뮬레이션 하기 위한 프로그램(SOMOS)을 제작하였다. Poisson의 방정식에 대하여는 Newton방법을, 연속방정식에 대하여는 발산정리를 이용하여 기본 수식들에 대한 유한차등법(FDM)에 따른 수식을 전개하였으며, 선형화된 수식의 해는 SOR 방법과 Cummel의 알고리즘을 이용하여 구했다. 하난의 동작상태의 소자를 시뮬레이션 하기 위한 시간은 VAX 11/780 컴퓨터를 사용했을때 인가전압 상태에 따라 30초 내지 4분 정도가 소요되었다. 인가전압과 전위분포에 따라 자동적으로 생성되는 그리드는 비균일한 간격을 가지며 필요에 따라 자동적으로 개선된다.

• 아태비즈니스연구
• /
• 제9권4호
• /
• pp.85-97
• /
• 2018

This paper investigates factors underlying a decrease in trading values in KOSPI 200 futures/options market on the basis of the current state of the markets. Among the factors that could affect trading values in KOSPI 200 derivatives market, we focus on the market activity of underlying assets as it has an impact on the trading of financial derivatives. Trading value and volatility are designated as market activity and the empirical results confirm that the market activity of the underlying assets is significant in explaining the decrease in trading values in KOSPI 200 futures/options market. To figure out fundamental reasons of the decrease in trading values in this market, we examine mitigation of home bias and decrease in leverage incentives as they are presumed to have influence on KOSPI 200 index market. As the global and local financial environment is time-varying, the degree of home bias and the leverage demand also changes. It implies that institutional change and/or policy effort to promote the trading of KOSPI 200 financial derivatives should be made taking into account the fact that considerable portion of the change in trading values in financial derivatives market depends on the state of the market.