• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.121-128
• /
• 2007

In this thesis, we would show how to lay out and produce the shell-type transformer using the world's first Zig-Zag winding way, instead of a general winding. Also, we omit the progress of varnish-impregnation, so that we could develop the new shell-type transformer winding which improves the short-circuit characteristics and dielectric strength. It has a copernican effect to reduce the thickness and the number of insulation papers, as compared with a general winding transformer. We would prove that it is far superior in cost reduction, loss reduction, and mechanical force of short-circuit. And eventually you must find it useful in the pole transformer for power distribution in the domestic power companies.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.97-105
• /
• 1989

This study was conducted to evaluate and compare the apical leakage among the retrograde filling materials; retrograde filling with non-zinc amalgam, cavity varnish and non-zinc amalgam, z.o.e cement, Glass Ionomer cement, scotch bond and silux. Sixty single rooted teeth were divided into six groups and each tooth was individually prepared for its particular group. The specimens were incubated at $37^{\circ}C$ for 24 hrs and then were infiltrated by 2% methylene blue for 7 days. Apical leakage was evaluated by measuring the degree of dye penetration between the filling material and the canal wall. The results were as follows: 1. The scotch bond and silux group showed the least amount of apical leakage and the control group showed the greatest amount of apical leakage. 2. The groups retrofilled with cavity varnish and amalgam, glass-Ionomer cement, scotch bond and silux showed significantly good apical seal than control group. 3. The groups retrofilled with glass Ionomer cement, scotchbond and silux showed significantly good apical seal than the groups retrofilled with Amalgam and Zinc oxide eugenol cement.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.5
• /
• pp.471-481
• /
• 2021

This study investigated the hygroscopicity and UV deterioration characteristics of 3 domestic and 4 imported woods using natural oil, stain, and varnish paints. In terms of hygroscopicity, it was found that the hygroscopicity of the painted wood was lower than that of the unpainted wood, and that as the number of coatings increased, the hygroscopicity decreased. In terms of anti-absorption, oil-based chemical paints showed higher resistance than water-based paints, and natural oils showed results comparable to oil-based paints. As for the UV deterioration, the amount of color change of the painted wood was lower than that of the unpainted wood, and there was no significant difference according to the number of times of painting. The amount of color change was found to be low in oil-based paints and hardwoods. Through this study, we confirmed effective moisture blocking and small color changes during painting using paints, and it is believed that wood can be protected from internal and external defects through selective and efficient painting based on data for excellent painting performance.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.250-260
• /
• 2022

In this research, a high-elasticity acrylic emulsion binder with core-shell polymerization and self-crosslinking system is mixed with a flame-retardant water-dispersed polyurethane (PUD) binder. In addition, finite element analysis was conducted through virtual engineering software ANSYS by applying three representative nonlinear material models. The most suitable nonlinear material model was selected after the relative comparison between the actual experimental values and the predicted values of the properties derived from simulations. The selected nonlinear material model is intended to be used as a nonlinear material model for computational simulation analysis that simulates the experimental environment of the vibration test (ASTM E1399) and the actual fire safety test (ASTM E1966). When the mass fraction of thermally expandable graphite was 0.7%, the thermal and physical properties were the best. Among the nonlinear material models, the simulation result of the Ogden model showed the closest value to the actual result.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.4
• /
• pp.467-475
• /
• 2021

The purpose of this study was to compare the effect of sodium fluoride(NaF) varnish and potassium iodide(KI) on remineralization efficacy of silver diamine fluoride(SDF) by measuring microhardness and evaluating surface morphology by scanning electron microscope(SEM). Artificial caries lesions were induced on extracted primary molars and vickers microhardness was measured. Specimens were randomly separated into 4 groups for treatment. The specimens in group I were treated with SDF, group II with NaF varnish after SDF, group III with KI after SDF and group IV with distilled water. After 8 days of pH cycling, vickers microhardness was measured and difference before and after treatment was calculated. For SEM, 2 samples were evaluated respectively after enamel polishing, lesion formation and after pH cycling. Group III showed highest increase in microhardness. Group I showed higher increase in microhardness than Group II but without statistical difference. Group IV showed lowest increase in microhardness value among 4 groups. On SEM image, group I, II and III showed smoother and less irregular surface compared to group IV. Amorphous crystal pellicles were observed in group III. In conclusion, SDF, SDF and NaF, SDF and KI groups showed smoother surface and increase in microhardness suggesting the possibility that remineralization effect might take place in oral conditions. In addition, in limited conditions of this study, applying NaF varnish after SDF did not increase the remineralization efficacy of SDF while KI significantly increased the remineralization efficacy of SDF. However, additional study considering various conditions that might affect demineralization and remineralization in clinical situations need to be conducted.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.377-384
• /
• 2009

The purpose of this study is to investigate the residual fluoride concentration of fluoride tape in oral cavity which made by spraying NaF on carboxymethylcellulose base. After 1, 3, 5, 7 hours and 1, 2, 3 days of applicating APF gel(60seconds $taste^{(R)}$, 1.23% APF gel, Group I), Fluoride varnish($CavityShield^{TM}$, 5% NaF, Group II) and Fluoride tape(SCMC-T-5, 5% NaF, Trial product, Group III) in oral cavity of 27 healthy adults in their twenties, the result of fluoride concentration in unstimulated whole saliva which measured by using fluoride sensitive electrode made up to following conclusion. 1. Until 7 hours after application in every group, it showed significantly higher fluoride concentration in saliva than baseline value but at 1, 2, 3 days after application, there were no significant differences between measurements and baseline value(p>0.05). 2. Until 7 hours after application at every time, mean fluoride concentration in saliva was higher in the order of Group II, I and III. 3. 1 hour and 3 hours after application, Group II revealed significantly higher fluoride concentration than Group III(p<0.05), but there were no significant differences between Group Ⅰ and Group III in every time.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.367-376
• /
• 2009

In this clinical research, the fluoride tape(SCMC-T-5) using fluoride(NaF) was developed and manufactured and the treatment effect of the fluoride tape in dentin hypersensitivity patients was evaluated and compared with the effect of existing fluoride varnish($CavityShield^{TM}$). Twenty two healthy adult patients(88 teeth) having dentin hypersensitivity participated in this clinical research and they were divided into two groups. The fluoride product was applied according to the manufacturer's instruction and the level of pain in the tooth after giving irritation using compressed air and ice stick was measured just after the application, after 3 days, after a week and after 4 weeks each using visual analog scale(VAS). In the experimental group, compared with the early VAS scores, all other VAS scores showed the significant decreases statistically. In the control group, all VAS scores except the VAS score of 34.091(air) measured 3 days after(using the irritation examination by the compressed air) showed the significant decreases statistically when compared with the early VAS scores. The fluoride tape and fluoride varnish used in this clinical research were able to treat the dentin hypersensitivity effectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.169-179
• /
• 1984

The purpose of this study was to observe the effect of dental varnish applied with fluoride to dental pulp by comparing the groups of commercial fluoride product $Duraphat^{(R)}$, $Copalite^{(R)}$ after 1 Mole sodium fluoride application, Cavity $Sealer^{(R)}$ after 1 Mole sodium fluoride application with the control group not applied the dental varnish. After Cl V Cavity form was prepared on the buccal surface of the crowns with the total 75 teeth by using 5 dogs, average weight of 13.2Kg, dental varnish and silver analgram were placed. This study was performed by 3, 7, 21, 28, 56 days each. The dogs were sacrificed to extract the teeth, cut at the apical one fourth, and prepared histologic examination by fixing with 10% buffered formalin perfusion at sacrifice and decalcification in 10% nitric acid. The specimens were embedded in paraffin, stained with Hematoxylin and Eosin, and serially sectioned with 6 ${\mu}$width each. Microscopic evaluation of serial sections at the various time periods among the different groups revealed the following results: 1. In the control group, the marked change of the odontoblastic layer was showed on the 3 days group, and it was decreased gradually. Healing response, such as hyperplasia, was seen on the 28 days group and it was continued to the 56 days group. 2. In the experimental group with Cavity $Sealer,^{(R)}$ a slight hemorrhage was seen in the odontoblastic layer on the 3 days group, and the healing response with the hyperplasia of the odontoblast was showed on the 21, 28 days group. It was completely healed on the 56 days group. 3. In the Duraphat R group, a slight hemorrhage showed on the 3 days group and the disarrangement of the Odontoblastic layer was seen on the 7, 21, 28 days group. Odontoblasts showed hyperplasia on the 28 days group, and healed completely on the 56 days group. 4. In the $Copalite^{(R)}$ group, the 7 days group showed remarkable hemorrhage in the odontoblastic layer and stroma, and also it showed reticular degeneration with the disarrangement of the odontoblastic layer and congestion. Each group showed disarrangement. Healing ability of this group was greater than that of the control group, but less than that of the $Duraphat^{(R)}$ and Cavity $Sealer^{(R)}$ group.

• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.707-727
• /
• 2000

매식된 인공치아의 성공을 위해서는 적절한 교합과 수동적 적합성을 갖는 보철물의 제작과 구강내 노출 직후부터의 세균성 치태조절이 요구된다. 본 연구는 전처리(passivation과 tridodecyl - methyl - ammonium chloride(TDMAC) 처리)가 다른 타이타늄 표 면에 chlorhexidine varnish와 테트라사이클린 을 도포시 약제의 방출역학을 알아보고 구강내 치태형성의 억제정도를 평가하기 위하여 시행 되었다. 이를 위해 방출용액으로 인산완충액 성분의 인조타액을 1일${\sim}$1개월간 매일 교환하여 약제농도를 측정하고 타이타늄 박막에 잔류한 약제 활성을 측정하였으며 항균제 도포한 타이타늄 원판을 부착한 장치를 구강내 위치시킨 1일${\sim}$3주 후 원판을 제거하여 주사전자현미경으로 세균 부착상을 관찰하였다. 테트라사이클린은 TDMAC 처리된 표면에서 $10{\sim}18$일까지 유효농도로 방출되었고 표면의 유효 항균 활성은 $3{\sim}4$주간 유지되었으며, chlorhexidine varnish 도포 시에는 TDMAC 전처리시 초기에 $3{\sim}7$일 간 증가한 유효 항균 활성을 방출하여 매식지대치 등에 이러한 항균제도포 시 매식치 주위환경에 항균활성 공급원으로 작용할 수 있음을 보였다. 주사현미경적 관찰시 모든 타이타늄 표면에서 구강내 위치 30분 후에는 세균이 부착되어 있지 않고 타액 단백질 성분에서 유래한 것으로 보이는 피막물질이 표면을 부분 또는 전면에 걸쳐 덮고 있었다. 구강내 노출 2시간 후 항균제 미도포 표본들에는 약간의 구균이 단층으로, $1{\sim}3$일 후에는 부분적으로 두꺼운 세균층을 형성하였고 7일 후에는 표면전체에 걸쳐 세균층이 덮여있었으며 주로 구균과 약간의 간균이 주종을 이루었다. 항균제 도포시 구강내 노출 1주일 이전까지는 미도포군에 비해 치태형성이 지연되는 경향을 보였지만 2주 이후에는 세균 수나 치태형성 양상이 유사하였다. 이 연구로부터 항균제 도포시 1주일 이전의 초기 치태형성을 감소시킬 수 있음을 알 수 있었으며 이러한 연구결과는 타이타늄 임프란트 지대치 표면에 항균제의 도포가 임상적으로 유용할 수 있음을 시사하였다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.129-138
• /
• 2012

The aim of this in vitro study was to evaluate the effectiveness of experimental 2.26% fluoride-polyvinyl alcohol (F-PVA) tape in inhibition of enamel demineralization using enamel surface microhardness (SMH) analysis and scanning electron microscopy (SEM) examination. Enamel specimens (n=60) randomly assigned to four groups: control group, F-PVA tape group, fluoride varinish (F-varnish) group, casein phosphopeptide-amorphous calcium phosphate (CPP-ACFP) group. After topical application, pH-cycling was processed. Then, SMH was measured and the percentage loss of surface microhardness (%SML) was calculated. For the SEM examination, five sample specimens in each group were treated and the morphologic character was evaluated. After pH-cycling, the SMH values of the enamel specimens of F-PVA tape and F-varnish group were significantly higher than that of CPP-ACFP group, there was no significant difference between F-PVA tape and Fvarnish group. With SEM examination, enamel surfaces in the F-PVA tape group and F-varnish group showed numerous spherical and ovoid crystals formed on the enamel surface were also observed. The density of crystals was higher than that of both control group and CPP-ACFP group. F-PVA tape is effective in inhibition of enamel demineralization. Also, F-PVA tape's inhibition of enamel demineralization is comparable to that of F-vanish and greater than that of CPP-ACFP.