• 제목/요약/키워드: variations of length

검색결과 904건 처리시간 0.027초

교량의 지간장과 고속전철하중 유효타격간격 사이의 관계에 따른 공진현상 (Resonance Phenomenon according to the relationship between Span Length of the Bridge and Effective Beating Interval of High-Speed Train)

  • 김성일;곽종원;장승필
    • 한국지진공학회논문집
    • /
    • 제3권2호
    • /
    • pp.67-76
    • /
    • 1999
  • 이동하중에 의한 교량의 공진현상은 차량의 속도와 유효타격간격에 의해 결정되는 이동하중의 운행진동수와 교량의 고유진동수가 일치할 경우 발생하게 된다. 철도교의 경우에는 정해진 열차만 통행하게 되므로 이러한 유효타격간격이 정량적으로 정해져있다 본 연구에서는 고속전철하중을 받는 교량의 지간장 변화에 따른 교량의 공진현상과 공진소멸현상을 분석하고자 한다. 강합성형 철도교에 대하여 판요소와 공간뼈대요소의 조합에 의한 3차원 모델링을 적용하였으며 또한 고속전철하중은 이동집중하중 모델과 3차원 모델링 두가지 방법을 사용하였다 수치예제로서 지간장 변화에 따른 수직처짐의 동적확대계수 상판의 최대수직가속도 단부회전각 등의 동적응답 분석을 통하여 고속철도 교량의 동적안정성에 적합한 지간장 설계기준에 대하여 논의 하였다.

  • PDF

곡절 길이비에 따른 복합적층 절판 구조물의 거동 (Behaviors of Laminated Composite Folded Structures According to Ratio of Folded Length)

  • 유용민;임성순;장석윤
    • 한국전산구조공학회논문집
    • /
    • 제19권3호
    • /
    • pp.223-231
    • /
    • 2006
  • 본 연구에서는 복합적층 절판 구조물을 고차 전단변형이론을 이용하여 길이변화에 의한 거동 특성을 해석한다. 고차 전단변형이론을 적용하기 위하여 잘 알려진 Lagrangian 및 Hermite 보간함수를 병용한 방법은 다소 복잡하고 4절점 요소에만 적용할 수 있으며, 3절점 요소에 적용할 경우 매우 복잡하게 된다. 이러한 단점 및 복잡성을 피하기 위하여 Lagrangian 보간함수만을 사용한 고차 전단변형이론을 이용하며 복합적층 절판 구조물의 해석과정의 편의성 및 정확성을 위하여 면내 회전각 자유도를 추가한다. 그러므로 한 요소 당 4개의 절점이 있으며, 한 절점 당 10개의 자유도를 가지게 된다. 기존의 절판 구조물은 길이 변화에 대한 영향을 고려한 경우가 적으므로 본 연구에서는 이를 중심 변수로 설정하여 다양한 매개변수 연구를 수행한다. 본 연구에서는 길이 변화에 따라 예측하기 힘든 복잡한 거동을 보이는 복합적층 절판 구조물의 거동특성을 분석하여 합리적인 설계가 가능하고자 한다.

서로 다른 길이를 갖는 이중벽 탄소 나노튜브 공진기의 초고주파 주파수 특성 (Ultra-High Frequency Characteristics of Double-Wall Carbon Nanotube Resonator with Different Length)

  • 김진태;이준하;이강호;최종호
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권12호
    • /
    • pp.175-180
    • /
    • 2010
  • 본 논문에서는 고전적인 분자 동역학 시뮬레이션을 통해서 다양한 길이를 가진 이중벽 탄소나노 튜브로 만들어진 초고주파 나노 기계 공진기의 주파수 변동 특성을 분석한다. 분석의 목적은 이중벽 탄소나노 튜브 벽의 길이에 따라 변동하는 공진기의 주파수 분석이다. 실험 결과, 주파수 변동이 여러 가지 외벽 길이 값 L10에 대해서는 내벽/외벽 길이 비율 L5/L10의 함수로 최대 주파수로 정규화된 공진 주파수가 Pearson VII 함수에 잘 맞고, 여러 가지 내벽 길이 값에 대해서는 외벽/내벽 길이 비율의 함수로 최대 주파수로 정규화된 공진 주파수가 Gauss 분산 함수에 잘 맞는 것을 보여준다.

한국형 틸팅차량의 터널 주행시 실내/외 압력변화에 대한 실험적 연구 (Experimental Study of the Internal/external Pressure Variation of TTX Travelling through a Tunnel)

  • 윤수환;곽민호;이동호;권혁빈;고태환
    • 한국철도학회논문집
    • /
    • 제12권2호
    • /
    • pp.309-314
    • /
    • 2009
  • 열차가 터널에 진입하면 열차의 전두부에 의해 압축파가, 후마부에 의해 팽창파가 터널 내에 각각 발생하게 된다. 터널내부에서 압축파와 팽창파가 열차와 서로 상호작용하면서 열차 실내/외의 양력은 급격하게 변화한다. 본 논문에서는 한국형 틸팅차량이 터널 주행 시 나타나는 차량의 실내 및 실외(차량표면) 압력변화 및 압력변화율을 분석하여, 터널길이와의 상관관계를 분석하였다. 또한, 현 틸팅차량의 기밀상태에서 터널주행 시 실내압력변화율을 검토하였다. 그 결과 길이가 짧은 터널에서는 압력파의 중첩이 발생하지 않아서 차량 실내/외 압력변화는 크게 나타나지 않았다. 하지만, 긴 터널에서는 압력파의 중첩과 차량과의 상호작용이 동시에 일어나면서 급격한 압력변화가 뚜렷하게 발생하였다. 또한, 특정한 길이의 터널에서는 압축파와 팽창파가 중첩되어 압력변화 및 변화율을 크게 완화시켰다.

유색대두 수집종의 특성연구 제1보 유색대두 수집종의 종실 및 생육특성 연구 (Basic Studies on the Native Colored-Soybean Cultivars I. Seed Characteristics and Performances in Growth and Yielding of Collected Colored - Soybean Cultivars)

  • 구자옥;민경수;하기용
    • 한국작물학회지
    • /
    • 제28권2호
    • /
    • pp.211-215
    • /
    • 1983
  • 수집된 재래의 유색대두종을 일률적인 재배조건하에서 종실특성 변이와 종실종군별 생육진전 및 수량형질 특성을 조사한 결과 다음의 결론을 얻었다. 1. 유색대두 수집종들은 100립중을 기준으로 하여 20gr 이하의 소립중, 20-25gr의 중립중, 25-30gr의 대립종 및 30gr 이상의 특대립종 등 4개군으로 나눌 수 있었다. 2. 종실크기에 관련된 요인중 종실장과 종실폭의 변이는 종실후보다 크게 나타났다. 3. 종실중과 경중 및 주당협수 등의 형질들은 변이계수에서 생육일수나 결과일수 등의 형질보다 큰 경향이었다. 4. 생육일수와 성숙일수 및 개화시기는 립중군별간에 유의한 차이를 나타내지 않았다. 5. 개화기와 성숙일수는 경장 및 경중과 정의 상관관계를, 경장과 경중은 수량형질과 정의 상관을 나타내었으며, 주당협수는 100립중과 부의 상관을, 또한 수량과는 정의 상관관계를 나타내었다.

  • PDF

Interspecific and Intraspecific Variation in Pollen Grains of Quercus Subgenus Lepidobalanus Endl. in Korea

  • Kim, Sang-Yong;Kim, Kae hwan
    • Plant Resources
    • /
    • 제5권1호
    • /
    • pp.17-28
    • /
    • 2002
  • Palynological characters such as pollen grain polar axis length (PL), pollen equatorial diameter (ED), colpus length, colpus width, and P/E ratio of six species of Quercus subgenus Lepidobalanus Endl. from Korea were studied. A significant interspecific variation, unequal distances between the species, and various degree of intraspecific variations were found. The taxonomic value of the pollen morphology parameters measured was found to vary according to species. These results suggest a possible relationship between parameters measured and ploidy level of the Quercus species studied.

  • PDF

원피스드레스의 소매와 스커트폭.길이변화가 인상형성에 미치는 영향 (The Effect of Sleeve and Skirt Width . Length Variation of Dress on Impression Formation)

  • 이웅희;강경자
    • 한국의류학회지
    • /
    • 제21권6호
    • /
    • pp.1060-1071
    • /
    • 1997
  • The purpose of this study is to identify the effect of clothing cues(sleeve and skirt width, length) on female impressions. The experimental materials developed for this study are a set of stimuli and response scales. The stimuli are 16 pictures manipulated with sleeve and skirt width · length variations by computer drawing. The experimental design consists of 3 factorial design: (1) sleeve shapes(plain, upper expanded, below expanded, all expanded) (2) skirt width (wide, narrow) (3) skirt length(long, short) The 7-point semantic differential response scale designed for visual evaluation of female' s impression formation on sleeve shape and skirt width · length is 27 bipolar adjectives. The results of this study are as follows: 1. When we analize the impressions of female figure by sleeve shape and width · length of skirt, it becomes clear that maturity, modernity, attention, elegance and tenderness are proved to be important. Among these five factors, maturity, modernity and attention are identified as more important ones. 2. Sleeve shape have an effect on all factors except maturity and the effects of sleeve on the four factors are not striking. ' Width of skirt are most influential to the maturity and attention, but it does not have any effect on modernity. However two factor, that is width of skirt and sleeve have an effects on modernity, attention and tenderness. ' The length of skirt has an effects on the tenderness, elegance and modernity, but it dose not have any effect on attention. But width and length of skirt have an effects on attention, tenderness and modernity The length of skirt and sleeve have an effect on tenderness.

  • PDF

곧은 사각채널을 통과하는 물성 변화가 큰 유동에 대한 수치해석 (NUMERICAL STUDIES ON FLOWS WITH STRONG PROPERTY VARIATIONS THROUGH STRAIGHT RECTANGULAR CHANNELS)

  • 최남정;최윤호
    • 한국전산유체공학회지
    • /
    • 제12권4호
    • /
    • pp.74-84
    • /
    • 2007
  • The flowfield characteristics in a straight rectangular channel have been investigated through a numerical model to analyze the regenerative cooling system that is used in rocket engine cooling. The supercritical hydrogen coolant introduces strong property variations that have a major influence on the developing flow and heat transfer characteristics. Of particular interest is the improved understanding of the physical characteristics of such flows through parametric studies. The approach used is a numerical solution of the full Navier-Stokes equations in the three dimensional form including the arbitrary equation of state and property variations. The present study compares constant and variable property solutions for both laminar and turbulent flow. For laminar flow, the variation of aspect ratio is examined, while for turbulent flow, the effects of variation of channel length and Reynolds number are discussed.

Modeling Electrical Characteristics for Multi-Finger MOSFETs Based on Drain Voltage Variation

  • Kang, Min-Gu;Yun, Il-Gu
    • Transactions on Electrical and Electronic Materials
    • /
    • 제12권6호
    • /
    • pp.245-248
    • /
    • 2011
  • The scaling down of metal oxide semiconductor field-effect transistors (MOSFETs) for the last several years has contributed to the reduction of the scaling variables and device parameters as well as the operating voltage of the MOSFET. At the same time, the variation in the electrical characteristics of MOSFETs is one of the major issues that need to be solved. Especially because the issue with variation is magnified as the drive voltage is decreased. Therefore, this paper will focus on the variations between electrical characteristics and drain voltage. In order to do this, the test patterned multi-finger MOSFETs using 90-nm process is used to investigate the characteristic variations, such as the threshold voltage, DIBL, subthreshold swing, transconductance and mobility via parasitic resistance extraction method. These characteristics can be analyzed by varying the gate width and length, and the number of fingers. Through this modeling scheme, the characteristic variations of multi-finger MOSFETs can be analyzed.

파장과 온도변화에 안정한 레이저 주사광학계 설계 (Optical Design of a Laser Scanning System Stable Against Wavelength and Temperature Variations)

  • 김다애;이종웅
    • 한국광학회지
    • /
    • 제27권1호
    • /
    • pp.32-40
    • /
    • 2016
  • 광학계의 특성은 파장과 온도에 따라 변화한다. 이 연구에서는 얇은 렌즈 근사를 이용하여 특정한 기준파장과 기준온도에서 파장과 온도변화에 안정한 광학계를 설계하는 방법에 대하여 연구하고, 이를 기반으로 2매의 렌즈로 구성된 레이저 주사광학계를 설계하였다. 설계된 레이저 주사광학계는 기대한 바와 같이 파장과 온도 변화에 따른 유효초점거리의 변화가 매우 적음을 확인 할 수 있었다.