• 한국농공학회논문집
• /
• 제52권6호
• /
• pp.19-26
• /
• 2010

Batch experiments were conducted to investigate growth and nutrient removal performance of microalgae Chlorella vulgaris by using piggery wastewater in different concentration of pollutants and the common growth models (logistic, Gompertz and Richards) were applied to compare microalgal growth parameters. Removal of nitrogen (N) and phosphorus (P) by Chlorella vulgaris showed correlation with biomass increase, implying nutrient uptake coupled with microalgae growth. The higher the levels of suspended solids (SS), COD and ammonia nitrogen were in the wastewater, the worse growth of Chlorella vulgaris was observed, showing the occurrence of growth inhibition in higher concentration of those pollutants. The growth parameters were estimated by non-linear regression of three growth curves for comparative analyses. Determination of growth parameters were more accurate with population as a variable than the logarithm of population in terms of R square. Richards model represented better fit comparing with logistic and Gompertz model. However, Richards model showed some complexity and sensitivity in calculation. In the cases tested, both logistic and Gompertz equation were proper to describe the growth of microalgae on piggery wastewater as well as easy to application.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.297-304
• /
• 2014

Due to the nonlinearity and complexity of the three-phase photovoltaic inverter, we propose an intelligent control based on fuzzy logic and the classical proportional-integral-derivative. The feedback linearization method is applied to cancel the nonlinearities, and transform the dynamic system into a simple and linear subsystem. The system is transformed from abc frame to dq0 synchronous frame, to simplify the state feedback linearization law, and make the close-loop dynamics in the equivalent linear model. The controls improve the dynamic response, efficiency and stability of the three-phase photovoltaic grid system, under variable temperature, solar intensity, and load. The intelligent control of the nonlinear characteristic of the photovoltaic automatically varies the coefficients $K_p$, $K_i$, and $K_d$ under variable temperature and irradiation, and eliminates the oscillation. The simulation results show the advantages of the proposed intelligent control in terms of the correctness, stability, and maintenance of its response, which from many aspects is better than that of the PID controller.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1907-1916
• /
• 2003

During decades, there has been much progress in understanding of the inelastic behavior of the materials and numerous inelastic constitutive equations have been developed. The complexity of these constitutive equations generally requires a stable and accurate numerical method. To obtain the increment of state variable, its evolution laws are linearized by several approximation methods, such as general midpoint rule(GMR) or general trapezoidal rule(GTR). In this investigation, semi-implicit integration schemes using GTR and GMR were developed and implemented into ABAQUS by means of UMAT subroutine. The comparison of integration schemes was conducted on the simple tension case, and simple shear case and nonproportional loading case. The fully implicit integration(FI) was the most stable but amplified the truncation error when the nonlinearity of state variable is strong. The semi-implicit integration using GTR gave the most accurate results at tension and shear problem. The numerical solutions with refined time increment were always placed between results of GTR and those of FI. GTR integration with adjusting midpoint parameter can be recommended as the best integration method for viscoplastic equation considering nonlinear kinematic hardening.

• ETRI Journal
• /
• 제28권3호
• /
• pp.301-310
• /
• 2006

In mobile communications, a class of variable-complexity algorithms for convolutional decoding known as sequential decoding algorithms is of interest since they have a computational time that could vary with changing channel conditions. The Fano algorithm is one well-known version of a sequential decoding algorithm. Since the decoding time of a Fano decoder follows the Pareto distribution, which is a heavy-tailed distribution parameterized by the channel signal-to-noise ratio (SNR), buffers are required to absorb the variable decoding delays of Fano decoders. Furthermore, since the decoding time drawn by a certain Pareto distribution can become unbounded, a maximum limit is often employed by a practical decoder to limit the worst-case decoding time. In this paper, we investigate the relations between buffer occupancy, decoding time, and channel conditions in a system where the Fano decoder is not allowed to run with unbounded decoding time. A timeout limit is thus imposed so that the decoding will be terminated if the decoding time reaches the limit. We use discrete-time semi-Markov models to describe such a Fano decoding system with timeout limits. Our queuing analysis provides expressions characterizing the average buffer occupancy as a function of channel conditions and timeout limits. Both numerical and simulation results are provided to validate the analytical results.

• 한국통신학회논문지
• /
• 제34권1C호
• /
• pp.113-119
• /
• 2009

The training sequence with the appropriate length for equalization and initial synchronization is necessary before sending the pure data in the burst transmission type DS-UWB system. The length of the training sequence is one of the factors which make throughput decreased. The noble structure with the variable length of the training sequence whose length can be adaptively tailored according to the channel conditions (CM1,CM2,CM3,CM4) in the DS-USB systems is proposed. This structure can increase the throughput without sacrificing the performance than the method with fixed length of training sequence considering the worst case channel conditions. Simulation results under IEEE 802.15.3a channel model show that the proposed scheme can achieve higher throughput than a conventional one with the slight loss of BER performance. And this structure can reduce the computation complexity and power consumption with selecting the short length of the training sequence.

• 설비공학논문집
• /
• 제27권4호
• /
• pp.187-194
• /
• 2015

This paper describes the PI controller design based on a practical transfer function model for centrifugal water chillers. The rotational speed of a compressor and the opening angle of an electronic expansion valve were simultaneously regulated as manipulated variables to maintain temperature reference and to ensure high efficiency of the chiller. The COP according to the change in each variable was investigated by performing some static experiments, and it was reflected in the PI controller design to accomplish the high efficiency control. Especially, the practical transfer function model of the chiller was built based on the dynamic experimental data considering the strong inherent non-linearity and complexity of the chiller system. The validity of the designed PI controller was proven by some experimental results using the test facility and the results were also compared to the conventional evaporating pressure control results.

• 경영과학
• /
• 제28권3호
• /
• pp.113-124
• /
• 2011

Today, change in the information technology field is very fast, the innovative technology or product to be released for the other sectors tend more frequent. In this situation, most of potential users should think carefully about the adoption of innovative technology such as Web2.0. On the other hand, the adoption or acceptance of innovative technology has the paradox of technology. In order to verify the acceptance factors of innovative technology, we are proposed the model based on the DOI and MIR. Conceptually, we examine the four independent variables such as relative benefit, compatibility, complexity, risk that are divided into two parts as positive and negative, a moderating variable effect on independent variables that is the social influence, and their impacts on the acceptance of new technology. The questionnaire which consists of 100 questions was used to analyze the result to IT suppliers and customers in public sector. Finally, our research model was tested in an empirical study, which confirmed all of our hypotheses.

• 지식경영연구
• /
• 제9권3호
• /
• pp.77-105
• /
• 2008

This study primarily aims at identifying what factors significantly affect the diffusion of knowledge management systems(KMS) and finding out how these identified factors can be effectively managed, especially for Korean companies. The research model is derived based on previous researches on innovation diffusion, information systems implementation, and KMS. The model is used to examine the role of determinants in influencing the extent to which KMS is diffused within organizations. Independent variables of this research are composed of technical characteristics, organizational characteristics and environmental characteristics. 'Breadth of diffusion' and 'depth of diffusion' concept are used to measure the extent of KMS diffusion which is the dependent variable of this model. The 101 companies of total 1,000 samples responded to the survey. To analyze tile results of this empirical study, we performed the multiple regression analysis. As a result, it was shown that the relative advantage, complexity, information system maturity, size, top management support, champion, competitive pressure have influences on both the breadth and the depth diffusions. On the other hand, the organizational culture, valuation and compensation, and uncertainty of environmental factors were not verified to be significant. This empirical study will provide Korean companies with insights into effective ways to diffuse the KMS and succeed in business competition.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2270-2273
• /
• 2003

Fuzzy logic control has been widely implemented in air conditioning and ventilation systems which has uncertainty or high robust system. Since the dynamic behaviors of the systems contain complexity and uncertainty in its parameters , several fuzzy logic controllers had been implemented to control room temperature in the field of air conditioning system. In this paper, the fuzzy logic control has been developed to control room temperature and humidity in the precision air conditioning systems. The nonlinear mathematical model was formulated using energy and continuity equations. MATLAB was used to simulate the fuzzy logic control of the multi-variable air conditioning systems. The simulation results show that fuzzy logic controller can reduce the steady-state errors of the room temperature and relative humidity in multivariable air conditioning systems. The offset are less than 0.5 degree Celsius and 3 percent in relative humidity respectively under random step disturbance in heating load and moisture load respectively

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1016-1019
• /
• 2002

This paper deals with a fundamental and classical scattering problem by a finite strip. For the analysis of scattered acoustic field, a “single” integral equation is derived. Firstly, the complexity by considering the effect of the mean flow is alleviated by the introduction of Prandtl-Glauert coordinate and the new dependent variable. Secondly, the difficulty of solving the resultant strongly-coupled integral equations which always appear in this kind of 3-part mixed boundary value problem is solved by observing some good properties of the functions in complex domain and manipulating the equations and variables for the use of those properties. The solution can be obtained asymptotically in terms of gamma function and Whittaker function. One aim of this study is the improvement of methodology for the research using integral equations. The other is the basic understanding of scattering by a finite strip related to the linear cascade model of rotating fan blades.