• Korean Journal of Ecology and Environment
• /
• v.40 no.3
• /
• pp.370-378
• /
• 2007

The objective of this research was to diagnose integrative ecological health in Bansuk Stream, one of the tributaries of Gap Stream, using the fish assemblage during July 2006${\sim}$April 2006. For this research, we selected six sampling sites and applied some approaches such as the Index of Biological Integrity (IBI), Qualitative Habitat Evaluation Index (QHEI), and necropsy-based Health Assessment Index (HAI). The stream health condition, based on the IBI values, averaged 24 (n= 18, range: $10{\sim}46$), indicating "poor${\sim}$fair" condition according to the criteria of US EPA (1993). Physical habitat condition, based on the QHEI, averaged 116 (n=6, range: $77{\sim}139$), indicating "fair${\sim}$good" condition. Values of IBI were more correlated with 3 metrics of instream cover ($M_1$, r=0.553, p=0.017, n=18), flow/velocity ($M_3$, r=0.627, p=0.005, n=18), and riffes/bends ($M_7$, r=0.631, p=0.005, n=18) than other metrics. Value of HAI in the control was zero (i.e., excellent condition), while the values in the T1 and T2 treatments were 5 (range: 0${\sim}$30) and 50 (range: 40${\sim}$80), respectively. The maximum values of IBI (46) were coincided with zero of HAI. Thus, these approaches seem to be a good tool for a diagnosis and evaluations of stream ecosystem health.

• Korea Real Estate Review
• /
• v.27 no.3
• /
• pp.87-102
• /
• 2017

The purpose of this study was to compare the taxation equity of non-residential collective real estate based on its standard market prices set by National Tax Service and those for taxation set by the Ministry of Government Administration and Home Affairs with that of the apartment houses in Seoul, South Korea. The study findings were as follows. First, the analysis results of the standard market price rates of non-residential collective real estate pointed to a huge gap in the assessment rate (AR) of the taxation standards among the Gu offices. Second, there was a big coefficient of dispersion (COD) in the standard market prices of non-residential collective real estate, which confirmed the presence of horizontal inequity. Finally, there was regressive vertical inequity, which leads to the undervaluation of high-value assets, in the standard market prices of non-residential collective real estate. The evaluation of the standard market prices of non-residential collective real state should thus reflect the market prices and the addition and assessment of the land and buildings to achieve taxation equity. Based on these findings, it is hoped that this study will make a significant contribution to the improvement of the official announcement system for non-residential real estate based on real transactions during the shift to such system.

• Journal of the Korean Magnetics Society
• /
• v.18 no.4
• /
• pp.131-135
• /
• 2008

The electronic structures, magnetism, and half-metallicity of the full-Heusler $Co_2TiSn$(001) surfaces have been investigated by using the all-electron full-potential linearized augmented plane wave method within the generalized gradient approximation. We have considered both of the Co atoms terminated(Co-term) and the TiSn atoms terminated(TiSn-term) surfaces. From the calculated density of states, we found that the half-metallicity was destroyed at the surface of the Co-term, while the half-metallicity was retained at the TiSn-term. For the surface of the Co-term, due to the reduced coordination number the occupied minority d-states were shifted to high energy regions and that cross the Fermi level, thus destroy the surface half-metallicity. On the other hand the surface states at the surface of the TiSn-term were located just below the Fermi level, which reduces the minority spin-gap with respect to that of the center layer. The calculated magnetic moment of the surface Co atom for the Co-term was increased by 10 % to 1.16 ${\mu}_B$ with respect to that of the inner-layers, while the magnetic moment of the subsurface Co atom in the TiSn-term has almost same value of the innerlayers(1.03 ${\mu}_B$).

• Journal of vocational education research
• /
• v.36 no.1
• /
• pp.1-22
• /
• 2017

This study examined the process of admission selection of vocational high schools and meister high schools and how the process have been utilized by schools to select appropriate students and by students to make decisions for application in consideration of their interests, aptitudes, and career paths. To address the purpose of this study, Focus Group Interviews(FGI) were conducted with three groups of participants: vocational high schools and meister high schools teachers, high school freshmen' parents, and middle school teachers who had many students advanced to vocational and meister high schools. The findings indicated that during the promotion process, schools made efforts to attract students with higher GAP and provided information mainly regarding employment rate instead of curriculum or program of majors. Since schools usually visited middle schools where higher GPA students were, not all students had balanced opportunities of high school promotions and enough information about majors. For the application process, the schools placed a high value on scholastic performance while students applied high schools considering their interests, aptitudes, and career paths. In terms of admission type and criteria, the high school teachers reported no big differences between special admission and general admission while students took advantage from the special admission process which was less competitive than general admission. Based on the findings, a number of suggestions were made in order to improve the process of admission selection of vocational high schools and meister high schools.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.15-21
• /
• 2019

We investigated the structural, electrical and optical properties of zinc oxide (ZnO) ultra-thin films grown at $150^{\circ}C$ by atomic layer deposition (ALD). Diethylzinc and deionized water were used as metal precursors and reactants, respectively, for the deposition of ZnO thin films. The growth rate per ALD cycle was a constant 0.21 nm/cycle at $150^{\circ}C$, and samples below 50 cycles had amorphous properties due to the relatively thin thickness at the initial ALD growth stage. With the increase of the thickness from 100 cycles to 200 cycles, the crystallinity of ZnO thin films was increased and hexagonal wurtzite structure was observed. In addition, the particle size of the ZnO thin film increased with increasing number of ALD cycles. Electrical properties analysis showed that the resistivity value decreased with the increase of the thin film thickness, which is correlated with the decrease of the grain boundary concentration in the thicker ZnO thin film due to the increase of grain size and the improvement of the crystallinity. Optical characterization results showed that the band edge absorption in the near ultraviolet region (300 nm~400 nm) was increased and shifted. This phenomenon is due to the increase of the carrier concentration with the increase of the ZnO thin film thickness. This result agrees well with the decrease of the resistivity with the increase of the thin film thickness. Consequently, as the thickness of the thin film increases, the stress on the film surface is relaxed, the band gap decreases, and the crystallinity and conductivity are improved.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.647-657
• /
• 2018

This study was carried out to review as criteria for zoning at management plan for river restoration, in case of naturalness of river environment and suitability of water friendly activity suggested at assessment system of river environment in Korea. As a result of reviewing law and guidelines concerned, historic & cultural resources used as criteria for preservation zone, it was judged that the historical and cultural value as the preservation zone needs to be examined in connection with waterfriendly activity zone. In this study, we propose a sequential evaluation method to distinguish the waterfriendly activity zone by applying suitability of waterfriendly activity reflecting land use social characteristics, followed division of preservation and restoration zone at the first stage by the naturalness of river environment reflecting the natural environmental characteristics as a result of application to the test bed, Gap and Yudeung streams. In particular, it was concluded that the results of the present study provided more clear criteria for the problem that the last criteria for zoning did not reflect the difference between the left and the right side of stream, or the designation of the excessive water friendly zone. On the other hand, the criteria for designation in this study reflect the characteristics of various river environments as well as the setting of assessment unit based on the physical characteristics of rivers, and other legal regulations and local situations should be adjusted and supplemented in administrative procedures.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.366-372
• /
• 2019

In this paper, we fabricated a capacitive humidity sensor with an IDT(Interdigitated) electrode using commercial polyimide containing fluorine, and its properties were measured and analyzed. First, in order to analyze the composition of commercial polyimide, EDS analysis was performed after patterning process on a silicon wafer. The area of the humidity sensor was $1.56{\times}1.66mm^2$, and the width of the electrode and the gap between the electrodes were $3{\mu}m$ each. The number of electrodes was 166 and the length of the electrode was 1.294mm for the sensitivity of the sensor. The fabricated sensor showed that the sensitivity was 24 fF/%RH, linearity <${\pm}2.5%RH$ and hysteresis <${\pm}4%RH$. As a result of measuring the capacitance value according to the frequency change, the capacitance vlaue decreased with increasing frequency. Capacitance deviations with 10kHz and 100kHz were measured as 0.3pF on average.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.54-59
• /
• 2022

This paper is a purpose to study and analyze the failure examples for timing belt, camshaft position sensor and ignition coil of LPG automotive engine. The first example, whe the service man install the front case bracket of engine, he excessively tightened up a 12mm bolt for being fixed of brackct. As a results, the bolt was separated from joint part so that it was put in between the crankshaft sprocket. Therefore the belt was broken off because of interference between timing belt and sprocket tooth. The second example, it verified the disharmony phenenomen of engine that the gap of the camshaft position sensor and camshaft senseing point assembled on cylinder head part was small more than iregular value so that the it was generated senseing damage phenomenon by pulse signal misconduct. The third example, it was found the engine disharmony phenomenon that the fire in the ignition coil was leaked by inner damage of Number 2 ignition coil.Therefore, the the manager of a car throughtly have to inspect not in order to arise the failure symptoms.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1301-1314
• /
• 2022

Normalized Difference Vegetation Index (NDVI) is utilized as an indicator to represent the vegetation condition on the land surface in various applications such as land cover, crop yield, agricultural drought, soil moisture, and forest disaster. However, satellite optical sensors for visible and infrared rays cannot see through the clouds, so the NDVI of the cloud pixel is not a valid value for the land surface. This study proposed a real-time correction of the underestimation noise for GEO-KOMPSAT-2A (GK2A) daily NDVI and made sure its feasibility through the quantitative comparisons with Moderate Resolution Imaging Spectroradiometer (MODIS) NDVI and the qualitative interpretation of time-series changes. The underestimation noise was effectively corrected by the procedures such as the time-series correction considering vegetation phenology, the outlier removal using long-term climatology, and the gap filling using rigorous statistical methods. The correlation with MODIS NDVI was higher, and the difference was lower, showing a 32.7% improvement compared to the original NDVI product. The proposed method has an extensibility for use in other satellite products with some modification.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.499-503
• /
• 2022

La_0.7Sr_0.3MnO₃ precursor solution were prepared by a sol-gel method. La_0.7Sr_0.3MnO₃ thin films were fabricated by a spin-coating method on a Pt/Ti/SiO₂/Si substrate. Structural and electrical properties with the variation of sintering temperature were measured. All specimens exhibited a polycrystalline orthorhombic crystal structure, and the average thickness of the specimens coated 6 times decreased from about 427 nm to 383 nm as the sintering temperature increased from 740℃ to 830℃. Electrical resistance decreased as the sintering temperature increased. In the La_0.7Sr_0.3MnO₃ thin films sintered at 830℃, electrical resistivity, TCR, B-value, and activation energy were 0.0374 mΩ·cm, 0.316%/℃, 296 K and 0.023 eV, respectively.