• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.5
• /
• pp.435-440
• /
• 2002

In this study, we have investigated photo-induced changes of optical energy gap( $E_{OP)}$ and photoluminescence (PL) in amorphous ($\alpha$-) S $e_{100-x}$G $e_{x}$ (x=5, 25 and 33) thin films prepared by conventional thermal evaporation method. In the $\alpha$-S $e_{100-x}$G $e_{x}$ thin film, the $E_{OP}$ is obtained by a linear extrapolation of the ($\alpha$hν)$^{\frac{1}{2}}$ versus hν plot to the energy axis using the optical absorption coefficient ($\alpha$) calculated from the extinction coefficient k measured in the wavelength range of 290~900nm. Although the values of $\Delta$ $E_{OP}$ are very different, all films exhibit photo-induced photo-darkening (PD) effect that is a red shift of $E_{OP}$ . In particular, $\Delta$ $E_{OP}$ in $\alpha$-S $e_{75}$ G $e_{25}$ thin film exhibits the largest value (i, e., $\Delta$ $E^{OP}$ ~40meV for $\alpha$-S $e_{95}$ G $e_{5}$ , $\Delta$ $E_{OP}$ ~200meV for $\alpha$-S $e_{75}$ G $e_{25}$ , $\Delta$ $E_{OP}$ ~130meV for $\alpha$-S $e_{67}$ G $e_{33}$ ). PL spectra in $\alpha$-SeGe by hν$_{HeCd}$ have no-Stokes shift (SS) and show a tendency dependent on both composition and illumination time. We explain the energy-induced phenomena such as the PD and thermal bleaching, the native charged-defect generation and the no-SS PL, etc..the PD and thermal bleaching, the native charged-defect generation and the no-SS PL, etc..tc..

• Korean Journal of Materials Research
• /
• v.21 no.12
• /
• pp.639-643
• /
• 2011

Zinc oxide as an optoelectronic device material was studied to utilize its wide band gap of 3.37 eV and high exciton biding energy of 60 meV. Using anti-site nitrogen to generate p-type zinc oxide has shown a deep acceptor level and low solubility. To increase the nitrogen solubility in zinc oxide, group 13 elements (aluminum, gallium, and indium) was co-added to nitrogen. The effect of aluminum on nitrogen solubility in a $3{\times}3{\times}2$ zinc oxide super cell containing 72 atoms was investigated using density functional theory with hybrid functionals of Heyd, Scuseria, and Ernzerhof (HSE). Aluminum and nitrogen were substituted for zinc and oxygen sites in the super cell, respectively. The band gap of the undoped super cell was calculated to be 3.36 eV from the density of states, and was in good agreement with the experimentally obtained value. Formation energies of a nitrogen molecule and nitric oxide in the zinc oxide super cell in zinc-rich conditions were lower than those in oxygen-rich conditions. When the number of nitrogen molecules near the aluminum increased from one to four in the super cell, their formation energies decreased to approach the valence band maximum to some degree. However, the acceptor level of nitrogen in zinc oxide with the co-incorporation of aluminum was still deep.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.170-181
• /
• 2021

The purpose of this study is to produce the results of the cultural aspects of the Honam region and present the aesthetic specificity of the traditional dances inherited in the Yehyang Honam region. The research method examined the regional characteristics of Honam dance and the form of Lee Mae-bang, Choi Seon, Jang Geum-do, and Cho Gap-nyeo Salpuri dance, and analyzed the authenticity and dance tendencies of Honam dance through the analysis.The work of understanding the background of local culture and creating cultural values through these representative salpuri dances in Honam region is an attempt to reflect on the essential value of the region as an intangible heritage of the region.

• Journal of Korea Trade
• /
• v.25 no.1
• /
• pp.89-111
• /
• 2021

Purpose - The U.S. Trade Preference Expansion Act (TPEA) of 2015 enables the US Department of Commerce (DOC) to inflate dumping margin when the particular market situation (PMS) exists in the exporter's home market. DOC applied PMS provisions to the steel products from Korea. This paper analyzes whether DOC's calculation by using the regression analysis is consistent with WTO rules. Design/methodology - This paper analyzes the PMS application in law and regression analysis that extends the data period from 10 years to 18 years using the same economic model with DOC, and changes the country group according to the quantities of steelmaking capacity. Findings - Results show that DOC's argument conflating the sales-based with cost-based PMS designed to inflate dumping margins might not be consistent with WTO Antidumping Agreement Article 2.2 and 2.2.1.1 in which costs shall normally be calculated on the basis of records kept by the exporter, providing generally accepted accounting principles and reasonably reflection of the costs and PMS that exists in the Korean steel product markets. Even if it will be consistent, DOC's calculated margin by the regression analysis using a 10-year data is a big gap (5 times) compared with an 18-year data projection and different countries' data through the same methodology, which is a huge gap of regression coefficient. It means that dumping margin would be very wide range from 7.8% to 38.54% and unstable to calculate. Inflating dumping margin by DOC using regression analysis would not only be inconsistent with WTO rules, but also projection result is unreliable. Originality/value - Literature papers have mainly analyzed WTO law itself. This paper however, would be the first attempt to analyze the DOC's new way of dumping margin calculation in both manners of law and an empirical methodology perspective at the same time.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.10
• /
• pp.207-215
• /
• 2019

The aim of the research is analyzing the simple adiabatic temperature rising properties and the heat of hydration based on different placing timing of the mass concrete depending on various replacing ratios of blast furnace slag to comparative analyze the thermal cracking index and cracking possibility. As a result from the experiment, a suggested adiabatic temperature rising equation based on various blast furnace slag replacing ratios can be provide favorable correlation with over 0.99 of $R^2$ value by applying the initial induction period. With this relationship, more accurate prediction of the amount of the hydration heat rising and heating timing, and it is known that there is an approximately $13.1^{\circ}C$ of gap between plain concrete without blast furnace slag and concrete with 80 % of replacing blast furnace slag. To control the setting time and heat rising gap, the mix designs between top and bottom concrete casts were changed 15 cases, and D, E, H, I, and L models of controlling the heat of hydration showed 41.23 to $46.88^{\circ}C$ of core temperature and 0.98 to 1.27 of thermal cracking index. Therefore the cracking possibility was 15 to 52 % of favorable results of possibly controlling both the cracking due to the internal and external retainment and concrete temperature at early age.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.89-94
• /
• 2021

Recently, the boundaries between people who produce and consume digital contents disappears due to the massive developments in information and communications technology (ICT) and the rapidly increasing spread of smartphones unlike in the traditional mass media (e.g., newspapers, radios, and TVs). Through the open service platform, the problem perception for each individual remains the same, but the problem solving methods varies as the service types have been diversified. The creation of added value through the growth of the new media platform industry is expected to enrich our lives, but it can also cause severe social side effects. For example, communication problems between social classes due to the information gap have led to generational conflict, and if such problems persist, it can cause national and social losses. Therefore, this paper analyzes the policy efforts to resolve the information gap and the necessity of the legalization of multimedia literary education to maximize the synergy effect through psychological model.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.27-37
• /
• 2022

In this study, a study and interpretation of the spinning process in copolymerized aramid spinning was conducted. In order to proceed with the spinning process modeling and analysis, the spinning process was modeled through the physical property modeling of the spinning solution and the structural modeling of the spinneret, and structural stability and flow of the spinneret for this spinning were analyzed. After modeling the spinning solution and the spinneret in a virtual space, the pack pressure and flow rate when the spinning solution was discharged were simulated. Macroscopically, the structural stability of the spinneret was confirmed at the standard pack pressure (100 kg·f/cm²), and microscopically, the flow rate and pressure drop data of the spinning solution according to the L/D(Length (L)/Diameter (D)) value were analyzed. Based on the research and development of virtual engineering modeling and analysis, we present the possibility of changing the shape and mechanical properties of copolymer aramid fibers according to the spinning process.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.6
• /
• pp.1-12
• /
• 2022

As the music streaming service and the Hi-Fi market grow, various audio devices are being released. As a result, consumers have a wider range of product choices, but it has become more difficult to find products that match their musical tastes. In this study, we proposed a system that extracts the vocal component from the user's preferred sound source and recommends the most suitable audio device to the user based on this information. To achieve this, first, the original sound source was separated using Python's Spleeter Library, the vocal sound source was extracted, and the result of collecting frequency band data of manufacturers' audio devices was shown in a grid graph. The Matching Gap Index (MGI) was proposed as an indicator for comparing the frequency band of the extracted vocal sound source and the measurement data of the frequency band of the audio devices. Based on the calculated MGI value, the audio device with the highest similarity with the user's preference is recommended. The recommendation results were verified using equalizer data for each genre provided by sound professional companies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1175-1180
• /
• 2022

STI has been studied a lot as a process technology for wide area planarization according to miniaturization and high integration of semiconductor devices. In this study, as methods for improving the STI profile, wet etching of pad oxide using hydrofluorine solution and dry etching of O₂+CF₄ after STI dry etching were proposed. This process technology showed improvement in profile imbalance and leakage current between patterns according to device density compared to the conventional method. In addition, as a result of measuring the HLD thickness after CMP for a device having the same STI depth and HLD deposition, the measured value was different depending on the device density. It was confirmed that this was due to the difference in the thickness of the nitride film according to the device density after CMP and the selectivity of the slurry.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.503-509
• /
• 2001

Thin films of hydrogenated amorphous silicon (a-Si : H) and hydrogenated amorphous silicon carbide (a-SiC:H) of different compositions were deposited on Si(100) wafer and glass by RF plasma-enhanced chemical vapor deposition (RF-PECVD). In the present work, we have investigated the effects of the RF power on the properties, such as optical band gap, transmittance and crystallinity. The Raman data show that the a-Si:H material consists of an amorphous and crystalline phase for the co-presence of two peaks centered at 480 and $520 cm^{-1}$ . The UV-VIS data suggested that the optical energy band gap ($E_{g}$ ) is not changed effectively with RF power and the obtained $E_{g}$(1.80eV) of the $\mu$c-Si:H thin film has almost the same value of a-Si:H thin film (1.75eV), indicating that the crystallity of hydrogenated amorphous silicon thin film can mainly not affected to their optical properties. However, the experimental results have shown that$ E_{g}$ of the a-SiC:H thin films changed little on the annealing temperature while $E_{g}$ increased with the RF power. The Raman spectrum of the a-SiC:H thin films annealed at high temperatures showed that graphitization of carbon clusters and microcrystalline silicon occurs.