• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.107-113
• /
• 2013

In this study, the microstructure and valuable metals dissolution properties of PDP waste panel powders were investigated as a function of milling parameters such as ball diameter size, milling time, and rotational speed during high-energy milling process. The complete refinement of powder could achieved at the ball diameter size of 5 mm due to sufficient impact energy and the number of collisions. With increasing milling time, the average particle size was rapidly decreased until the first 30 seconds, then decreased gradually about $3{\mu}m$ at 3 minutes and finally, increased with presence of agglomerated particles of $35{\mu}m$ at 5 minutes. Although there was no significant difference on the size of the particle according to the rotational speed from 900 to 1,100 rpm, the total valuable metals dissolution amount was most excellent at 1,100 rpm. As a result, the best milling conditions for maximum dissolving amount of valuable metals (Mg: 375 ppm, Ag 135 ppm, In: 17 ppm) in this research were achieved with 5 mm of ball diameter size, 3min of milling time, and 1,100 rpm of rotational speed.

• 자원리싸이클링
• /
• 제26권5호
• /
• pp.77-84
• /
• 2017

알루미늄 재활용공정에서 화이트드로스와 블랙드로스가 발생한다. 블랙드로스에 함유된 유용 성분을 회수할 수 있는 공정은 아직까지 개발되지 않았다. 습식공정은 알루미늄 드로스의 처리에 적합하다. 블랙드로스에 함유된 염은 물로 용해시켜 회수할 수 있다. 염회수 후 잔사는 알칼리용액이나 산용액으로 침출한다. 알칼리용액에서 침출속도는 산성용액에서의 속도보다 낮지만, 중간생성물이 알루미나를 함유한 제품을 생산하기에 더욱 적합하다. 알루미늄 드로스의 처리 및 유용성분의 회수를 위한 방향에 대해 고찰했다.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.477-485
• /
• 2016

As expensive and valuable metals being used in electronic and semiconducting industries are abandoned as industrial wastes after use of them, it is required to recover them from e-wasted electronics parts. Gold which is used for printed circuit boards or electronic equipments, accessories, etc., is one of e-Wasted materials and recently indium, gallium, zirconium, cobalt, molybdenum and lithium are bacome valuable metals to be recovered from the e-wastes. Since the amount of precious metals is now being faced with scarcity, lean too much on area and instability of supply, and industrial demands are rapidly increasing every year, it becomes more important to recover the valuable metals from the industrial wastes. In this review, we introduced technologies and research trend of the recovery processes of valuable metals from the e-wastes in high-tech devices over the world.

• 동의생리병리학회지
• /
• 제22권2호
• /
• pp.333-339
• /
• 2008

Korean ginseng (Panax ginseng C. A. Meyer) has been used as an important medicinal plant in the Orient for a long time. It has been claimed that ginseng has many beneficial bioactive effects on human health, such as antitumor, antistress, antiaging and enhancing immune functions. Red ginseng possibly have new ingredients converted during steaming and dry process from fresh ginseng. Kujeungkupo method which means 9 repetitive steaming and drying process was used for the processes of green tea, Polygonatum odoratum, and Rehmanniae radix preparata. In this study, ingredient conversion of ginseng by 9 repetitive steaming and drying process were investigated measuring conversion efficiency of brown materials, crude lipids, crude proteins and aromatic compounds. Brown materials, as an antioxidant, in red ginseng were produced through non-enzymatic reaction by heat. Repetitive steaming and drying treatments on ginseng root contiunously increased the content of brown materials and the chromaticity. Crude lipids were degraded by heat and converted into volatile aromatic ingredients. Crude lipids were degraded and decreased by 0.52% after the 5th and 7th. Crude proteins were also decomposed and converted to amino acid. Crude proteins after the 9th treatment were decreased by more than 85% as increased times of treatments. A bicyclogermacrene as aromatic material was decreased as increased treatment times, while but a aromatic caramel was increased.

• Journal of Electrochemical Science and Technology
• /
• 제9권2호
• /
• pp.157-162
• /
• 2018

In the study, herbaceous biomass waste including giant miscanthus, corn stalk, and wheat stalk were used to prepare commercially valuable activated carbons by KOH activation. The waste biomass predominantly consists of cellulose/hemicellulose and lignin, in which decomposition after carbonization and activation contributed to commercially valuable specific surface areas (>$2000m^2/g$) and specific capacitances (>120 F/g) that exceeded those of commercial activated carbon. The significant electrochemical performance of the herbaceous biomass-derived activated carbons indicated the feasibility of utilizing waste biomass to fabricate energy storage materials. Furthermore, with respect to both economic and environmental perspectives, it is advantageous to obtain activated carbon from herbaceous biomass waste given the ease of handling biomass and the low production cost of activated carbon.

• 자원리싸이클링
• /
• 제17권2호
• /
• pp.46-54
• /
• 2008

폐 컴퓨터나 OA기기 중 PCB (Printed Circuit Board)에는 귀금속을 포함한 많은 양의 금속성분이 함유되어 있으며, 본 연구에서는 이들을 분리회수하기 위한 건식처리 기술을 검토하였다. 폐 컴퓨터로부터 얻은 PCB 스크랩을 산화처리한 시료에 대해 정량분석을 실시하고, 함유된 산화물 종류에 대하여 적합한 슬래그계를 선정하여 유가금속을 분리회수하기 위한 산화물 성분의 슬래그화를 시도하였다. 용융작업을 위해 슈퍼칸탈 회전로를 사용하였으며, 이때 도가니 회전이 금속의 회수율에 미치는 영향을 조사하였다.

• 자원리싸이클링
• /
• 제21권2호
• /
• pp.3-8
• /
• 2012

유한자원의 순환활용과 환경보전 관점에서 도시광석으로부터 산업원료로 재사용될 수 있는 금, 은, 팔라듐 및 구리, 주석, 니켈, 코발트, 리튬 등 유용금속의 회수는 매우 중요하다. 현재까지 도시광석으로부터 유용금속을 회수하기 위한 많은 공정이 개발되었으며, 그 중 일부는 상업적으로 가동되고 있다. 본 논문에서는 문헌을 통하여 조사된 도시광석으로부터 산업원료로 사용되는 유용금속을 재생하기 위하여 개발된 중요한 건식공정들을 간략히 소개하고자 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.193-197
• /
• 2001

This study was carried out to recover gold, silver and other valuable metals from the printed circuit boards (PCB) of waste computers. PCB samples were crushed to under 1mm by a shredder and initially separated into 30% conducting and 70% non-conducting materials by an electrostatic separator. The conducting materials, which contained the valuable metals, were then used as the feed material for magnetic separation where it was found that 42% was magnetic and 58% non- magnetic. The non-magnetic materials contained 0.227mg/g Au and 0.697mg/g Ag. Further leaching of the non-magnetic component using 2.0M sulfuric acid and 0.2M hydrogen peroxide at 85$^{\circ}C$ extracted more than 95% copper, iron, zinc, nickel and aluminium. Au and Ag were not extracted in this solution, however, more than 95% of Au and 100% of Ag were selectively leached with a mixed solvent (0.2M ammonium thiosulfate, 0.02M copper sulfate, 0.4M ammonium hydroxide). Finally, the residues were reacted with a NaCl solution to leach out Pb while sulfuric acid was used to leach out Sn. Recoveries reached 95% and 98% in solution, respectively.

• 자원리싸이클링
• /
• 제25권2호
• /
• pp.42-48
• /
• 2016

국내 전자 디스플레이 산업의 고도화된 기술과 평판 디스플레이 제품의 글로벌 점유율은 세계 최고 수준이지만 사용 후 버려지는 폐 디스플레이 제품에 대한 재활용 기술 및 재활용 현황은 아직 글로벌 리더 수준에는 못 미치고 있다. 평판 디스플레이 제품의 짧은 순환주기를 고려할 때, 폐 디스플레이 제품의 재자원화는 전 세계적으로 경제와 환경측면에서 이슈가 되고 있다. 본 연구는 향후 폐 LCD (Liquid Crystal Display) 제품 재활용 플랜트에서 활용할 수 있는 재자원화 데이터베이스를 구축하기 위한 기초연구로 40인치와 42인치 크기의 폐 LCD 제품의 분리해체 방법과 해체 모듈과 부품에서 회수 가능한 유용자원의 종류와 구성비를 분석하였다. 폐 LCD 해체 분석결과를 보면 무게비로 플라스틱은 약 22%, PCB (Print Circuit Board)는 약 9%, 패널부는 약 34%, 이 외 금속류를 포함한 기타는 약 35%의 구성비를 가지고 있었다. 본 연구에서 얻어진 폐 LCD 데이터베이스는 폐 제품의 재활용률 향상은 물론 효율적 재자원화를 통한 경제적 해체 공정 시스템을 구축하는데 기여할 것으로 판단된다.

• 자원리싸이클링
• /
• 제23권4호
• /
• pp.21-29
• /
• 2014

폐리튬이온전지 NCM($Li(Ni_xCo_yMn_z)O_2$)양극활물질 내에는 코발트(15 ~ 20%), 니켈(25 ~ 30%), Mn(10 ~ 15%) 및 리튬(5 ~ 10%) 등의 유가금속이 존재한다. 본 연구에서는 폐리튬이온전지 NCM 양극활물질로부터 친환경 유기산인 말릭산을 이용한 유가금속 침출 공정을 연구하였다. 주요공정인자는 말릭산 농도, 과산화수소 농도, 고액비, 반응온도 등이었으며, 침출액 내 금속농도는 ICP-OES(Inductively Coupled Plasma Optic Emission Spectrometer)를 통해 분석하였다. 환원제($H_2O_2$) 첨가로 인해 유가금속의 침출율이 상승하는 효과를 얻었으며, 최적공정인자는 말릭산 2 M, 과산화수소 5 vol.%, 고액비(solid/liquid ratio) 5 wt.%, 반응온도 $80^{\circ}C$이었으며, 침출율은 코발트 99.10%, 니켈 99.80%, 리튬 99.75%이었다.