• 한국분말재료학회지
• /
• 제5권4호
• /
• pp.293-298
• /
• 1998

In all larger hardmetal workshops furnaces for dewaxing, vacuum sintering or vacuum and overpressure sintering are today's standard. The furnace technology is well established. Equipment specifications such as operating overpressure, determine sintering cost, product quality, safety and reliability of the furnace and ultimately influence the competitiveness of the hard metal procucer in the global market. Essential furnace requirements are an efficient utilization of the furnace, an environmental friendly dewaxing system, high temperature uniformity, metallurgical treatment with process gases, as well as reduced cooling time by means of rapid cooling. Examples of reduced sintering costs are described achieved using a new design of vacuum sintering furnace with an improved rapid cooling device, cooling times are reduced by up to 45%. Additionally, a cost comparison of two different designs of vacuum overpressure sintering furnaces are included.

• 반도체디스플레이기술학회지
• /
• 제4권3호
• /
• pp.23-27
• /
• 2005

The effects of the base vacuum level on a plasma display panel (PDP) produced by the vacuum in-line sealing technology were investigated. The main equipment of the vacuum in-line sealing process consists of the sealing chamber, pumping systems for evacuating, mass flow controller for introducing the plasma gases, and other measuring systems. During the sealing process, the impurity gases were fully evacuated and the panel was prevented from the adsorption of impurity gases. As a result, the brightness increased as the impurity gas density decreased, so we found that the vacuum in-line sealing process was more efficient technology an the conventional sealing process.

• 설비공학논문집
• /
• 제9권3호
• /
• pp.284-291
• /
• 1997

A hydrogen liquefaction equipment by direct cooling has been designed and built at KIST. Cool-down characteristics and liquefaction performance of the equipment have been investigated. The hydrogen liquefaction equipment consists of a GM refrigerator, a liquefaction velssel, a radiation shield and a cryostat. It is found that the hydrogen starts to be liquefied in the liquefaction vessel after 40~50 minutes of cool-down from the gas state of 270K. The effect of natural convection phenomena of charged gas in liquefaction vessel on the cool-down characteristics is evaluated by comparing with those in vacuum of liquefaction vessel. It is seen that the cool-down time of a liquefaction vessel is substantially increased in vacuum environment of liquefaction vessel. The experiments have been performed for 1~5 atm of hydrogen pressure to investigate the influence of hydrogen pressure on the liquefaction rate and figure of merit(FOM). It is found that both liquefaction rate and FOM are increased as the charged hydrogen pressure is increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.817-820
• /
• 2001

This machine is a high-vacuum exhaust sealing device which makes the inside of PDP element in high vacuum state, blows inactive gases into it and finally seals it. This machine consists of vacuuming parts, heating parts and exhausting parts. Applying the energy saving technology, this machine improves the temperature uniformity of vacuuming and heating parts.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1795-1797
• /
• 2001

This machine is a high-vacuum exhaust sealing device which makes the inside of PDP element in high vacuum state, blows inactive gases into it and finally seals it. This machine consists of vacuuming parts, heating parts and exhausting parts. Applying the energy saving technology, this machine improves the temperature uniformity of vacuuming and heating parts.

• 한국진공학회지
• /
• 제14권3호
• /
• pp.103-109
• /
• 2005

정적법을 이용하여 새로운 중진공 국가표준기를 개발하였다. 이 장치의 성능평가를 위해 측정범위가 각각 133pa과 1,333pa인 두 개의 용량혈 진공게이지를 전달표준기로 사용하여 초음파간섭 수은주압력계와 중진공 표준을 상호비교하였다. Error normalized (En) 값으로 분석한 결과 교정압력 $3pa\;\sim\;100pa$에서 두 표준기는 합성불확도 범위 내에서 잘 일치하고 있음을 알 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.361-364
• /
• 2009

마이크로 인공위성에 적용가능한 마이크로 추력기를 개발하기 위해서는 우주환경을 모사할 수 있는 진공설비가 요구된다. 본 논문에서는 $10^{-5}\;torr$의 진공도를 목표로 정하고 진공설비를 구축하였고, $100{\sim}120\;km$의 고도를 모사한다. 장치 선정 및 실제 장치 구축 후 진공도 성능 실험을 수행하였고 저진공 펌프를 작동시켜 누센펌프의 멤브레인에 따른 특성연구를 진행하였다. 또한 향후 열진공챔버로의 전환을 위한 계획을 서술하였다.

• 상하수도학회지
• /
• 제30권3호
• /
• pp.313-319
• /
• 2016

In this study, the performance experiment was conducted to compare the permeate flux of hollow fiber Vacuum Membrane Distillation module according to leak problem between module housing and membrane bundle. For the permeate flux performance experiment of the two Vacuum Membrane Distillation modules, the Lab-scale experimental equipment was built in the capacity of $1m^3/day$. The performance test of the two Vacuum Membrane Distillation modules were analyzed according to the feed water conditions. As a result, it was analyzed that the leak VMD module decreased about 14% of permeate flux than normal VMD module.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.39-42
• /
• 2001

This paper addresses the development of VP curing equipment for the substitution of autoclave which has several limits in application. This equipment adopt vacuuming and pressurizing processes similarly to the autoclave, but has flexible pressurizing and movable system. The experiments were pursued to determine and to compare specific properties of the specimens produced by three kinds of processes; autoclave, hotpress, and VP. The results show that the VP curing equipment can produce the useful composite material with a little inferior quality to the autoclave, but better than the hotpress. Considering the movability of VP curing equipment, it can be expanded its application to the areas of composite patch-repaired structure in large objects.

• 한국진공학회지
• /
• 제6권S1호
• /
• pp.133-136
• /
• 1997

In this paper multi-arc plasma plating film equipment Bulat-6 and its technical characteristics were analyzed in detail. This machine is the first of its kind in China. Influential factors and reducing methods on microdroplets of titanium were investigated. By method of electromagnetic field control and ion beam enhanced deposition excellent titanium nitride film could be obtained. Bicrohardness and adhesion were 250Mpa and 6.5Kg respectively.