• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1277-1279
• /
• 1994

In the structure of ZnO/nip-SiC: H/metal substrate amorphous silicon (a-Si:H) solar cells, the effects of inserting a rear textured ZnO in the p-SiC:H/metal interface and a graded bandgap buffer layer in the i/p-SiC:H have been analysed by computer simulation. The incident light was taken to have an intensity of $100mW/cm^2$(AM-1). The thickness of the a-Si:H n, ${\delta}$-doped a-SiC:H p, and buffer layers was assumed to be $200{\AA},\;66{\AA}$, and $80{\AA}$, respectively. The scattering coefficients of the front and back ZnO were taken to be 0.2 and 0.7, respectively. Inserting the rear buffer layer significantly increases the open circuit voltage($V_{oc}$) due to reduction of the i/p interface recombination rate. The use of textured ZnO markedly improves collection efficiency in the long wavelengths( above ${\sim}550nm$ ) by back scattering and light confinement effects, resulting in dramatic enhancement of the short circuit current density($J_{sc}$). By using the rear buffer and textured ZnO, the i-layer thickness of the ceil for obtaining the maximum efficiency becomes thinner(${\sim}2500{\AA}$). From these results, it is concluded that the use of textured ZnO and buffer layer at the backside of the ceil is very effective for enhancing the conversion efficiency and reducing the degradation of a-Si:H pin-type solar cells.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.3
• /
• pp.173-177
• /
• 1977

Optical properties were studied in the Japan Sea based on the optical observations in nine oceanographic stations from September 28 to October 2, 1976. Submarine light intensity was measured by using a submarine illuminometer (RIGO, Type: 2501-A) : equipped with a filter(RIGO, Type:V-R-60, wavelength: 600-620nm). In the upper 40 m depth layer light intensity was measured at 1 m depth interval. The absorption coefficient for red color in the area ranged from 0.142 to 0.323 (mean 0.232) : the Secchi-disc depth in the area ranged from 15 to 23 meters (mean 19.8 meters). The relation ship between absorption coefficient (m) am transparency depth (D) was m =4.93/D. The rates of light penetration for red color at three different depths are computed with reference to the surface light intensity At tile depths of 5 m, 10 m and 20 m, the rates of light penetration were $23.11\%(15-34.2\%),\;6.49\%(3.04-12\%)\;and\;0.698\%(0.113-1.27\%)$ respectively.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.4
• /
• pp.187-192
• /
• 2011

Photoelectrochemical performances of ZnO electrodes are enhanced by coupling with cobalt-based catalyst (CoPi) in phosphate electrolyte (pH 7). For this study, hexagonal pillar-shaped ZnO nanorods are grown on ZnO electrodes through a chemical bath deposition, onto which CoPi is deposited with different photodeposition times (10-30 min). A scanning electron microscopic study indicates that CoPi deposition does not induce any change of ZnO morphology and an energy-dispersive X-ray spectroscopic analysis shows that inorganic phosphate ions (Pi) exist on ZnO surface. Bare ZnO electrodes generate the current of ca. $0.36mA/cm^2$ at a bias potential of 0.5 V vs. SCE, whereas ZnO/CoPi (deposited for 10 min) has ca. 50%-enhanced current ($0.54mW/cm^2$) under irradiation of AM 1.5G-light ($400mW/cm^2$). The excess loading of CoPi on ZnO results in decrease of photocurrents as compared to bare ZnO likely due to limited electrolyte access to ZnO and/or CoPi-mediated recombination of photogenerated charge carriers. The primary role of CoPi is speculated to trap the photogenerated holes and thereby oxidize water into molecular oxygen via an intervalency cycle among Co(II), Co(III), and Co(IV).

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.22-31
• /
• 2013

Flight tests on flight control performance of helicopter, conversion and airplane mode for the Smart UAV were completed. Automatic take-off and landing, automatic return home as well as automatic approach to hover were performed in helicopter mode. Climb/descent, left/right turn using speed and altitude hold mode were performed in each $10^{\circ}$ tilt angle in conversion mode. The rotor speed in airplane mode was reduced to 82% from 98% RPM in order to increase rotor efficiency with reducing Mach number at tip of rotors. It reached to the designed maximum speed, $V_{TAS}$=440 km/h at 3 km altitude. This paper presents the flight test result on full envelopment of Smart UAV. Detailed test plan and test data on control performance were also presented to prove that all data meets the flying qualities requirement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.76-82
• /
• 2002

In this paper, we implemented on the classifier for differential diagnosis of laryngeals disease which is normal, polyp, nodule, palsy, and each step of glottic cancer using hierarchical neural network. We conducted on classifier of various vowels as /a/, /e/, /i/, /o/, /u/ from normal group, laryngeal disease group, each step of cancer group. The experimental result on classification of each vowels as follows. A /a/ vowel shows excellent classification result to the other vowels in regard to each Input parameters. Thus we implemented the hierarchical neural network for differential diagnosis of laryngeals disease using only /a/ vowel. A implemented hierarchical neural network is composed of each other laryngeals disease apply to each other parameter in each hierarchical layer. We take the voice signals from patient who get the laryngeal disease and glottic cancer, and then use the APQ, PPQ, vAm, Jitter, Shimmer, RAP as input parameter of neural networks.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.470-477
• /
• 2018

With a highly functional methyl vinyl silicone rubber (VMQ) matrix and filler materials of $B_4C$, PbO, and benzophenone (BP) and through powder surface modification, silicone rubber mixing, and vulcanized molding, a flexible radiation shielding and resistant composite was prepared in the study. The dispersion property of the powder in the matrix filler was improved by powder surface modification. BP was added into the matrix to enhance the radiation resistance performance of the composites. After irradiation, the tensile strength, elongation, and tear strength of the composites decreased, while the Shore hardness of the composites and the crosslinking density of the VMQ matrix increased. Moreover, the composites with BP showed better mechanical properties and smaller crosslinking density than those without BP after irradiation. The initial degradation temperatures of the composites containing BP before and after irradiation were $323.6^{\circ}C$ and $335.3^{\circ}C$, respectively. The transmission of neutrons for a 2-mm thick sample was only 0.12 for an Am-Be neutron source. The transmission of ${\gamma}$-rays with energies of 0.662, 1.173, and 1.332 MeV for 2-cm thick samples were 0.7, 0.782, and 0.795, respectively.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.603-610
• /
• 2021

The major drawback of zirconia-based materials, in view of their applications as targets for minor actinide transmutation, is their poor thermal conductivity. The addition of MgO, which has high thermal conductivity, to zirconia-based materials is expected to improve their thermal conductivity. On these grounds, the present study aims at phase characterization and thermophysical property evaluation of neodymium-substituted zirconia (Zr_0.8Nd_0.2O_1.9; using Nd₂O₃ as a surrogate for Am₂O₃) and its composites with MgO. The composite was prepared by a solid-state reaction of Zr_0.8Nd_0.2O_1.9 (synthesized by gel combustion) and commercial MgO powders at 1773 K. Phase characterization was carried out by X-ray diffraction and the microstructural investigation was performed using a scanning electron microscope equipped with energy dispersive spectroscopy. The linear thermal expansion coefficient of Zr_0.8Nd_0.2O_1.9 increases upon composite formation with MgO, which is attributed to a higher thermal expansivity of MgO. Similarly, specific heat also increases with the addition of MgO to Zr_0.8Nd_0.2O_1.9. Thermal conductivity was calculated from measured thermal diffusivity, temperature-dependent density and specific heat values. Thermal conductivity of Zr_0.8Nd_0.2O_1.9-MgO (50 wt%) composite is more than that of typical UO₂ fuel, supporting the potential of Zr_0.8Nd_0.2O_1.9-MgO composites as target materials for minor actinides transmutation.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.28 no.2
• /
• pp.7-14
• /
• 2022

Purposed: This study was conducted to find out by ultrasonic waves the thickness change of the deep abdominal muscles, such as transverse abdominal, internal oblique and external oblique when performing general bridge exercise on the stable surface (GBE), single-legged bridge exercise on the stable surface (BES), bridge exercise with a sling (SBE) and single-legged bridge exercise with a sling (SBS). Methods: The subject, 33 healthy adults(18 men and 15 women) in their 20s of V university in J city were subjected to take four postures of GBE, BES, SBE, and SBS. When performing each posture, the thickness of transverse abdominal, internal oblique and external oblique were measured by ultrasonic waves and analyzed by repeated measures of ANOVA. This significance level was set to be p<.05. Results: Muscle thickness was increased in the order of BES, SBE, and GBE in the external oblique, resulting in statistically significant differences(p<.001). The internal oblique was significantly thicker in SBE and SBS rather than in GBE, and was thicker in SBE and SBS rather than in BES (p<.01). The thickness of the transverse abdominal was significantly increased in SBS than in GBE (p<.01). Conclusion: As the result, it may be more effective for the trunk stabilization exercises to activate the internal oblique and transverse abdominal by applying both-legged or single-legged bridge exercise in slings.

• Clinical and Experimental Pediatrics
• /
• v.46 no.7
• /
• pp.702-709
• /
• 2003

Purpose : $IFN{\gamma}$ sentitizes many tumor cells to $TNF{\alpha}$ and FASL-mediated apoptosis by enhancing the expression of TNF or FAS/CD95 receptor and modulating the activation of caspase and Bcl-2 family. It has been reported that $IFN{\gamma}$ and $TNF{\alpha}$ synergistically caused differentiation and growth inhibition of neuroblastoma cells. Even though some neuroblastoma cell express FASR/FASL on the cell surface, they could not induce apoptosis by ligation of the FAS/CD95 receptor. But the treatment of $IFN{\gamma}$ is reported to induce apoptosis in some neuroblastoma cell lines through the CD95/CD95L autocrine circuit. In this study, we examined whether $IFN{\gamma}$ could affect $TNF{\alpha}$ and agonistic FAS/CD95 antibody(CH-11)-induced apoptosis against neuroblastoma cell lines that had shown diverse drug sensitivity and resistance. Methods : CHLA-15, CHLA-90 and LA-N-2 neuroblastoma cells were cultured in IMDM and treated with recombinant $IFN{\gamma}$, $TNF{\alpha}$ and CH-11 antibody. Cell viability was measured by DIMSCAN with a fluorescent calcein-AM. Apoptosis was analyzed through flow cytometry using Annexin V-PE and 7-ADD staining and confirmed by pancaspase and caspase-8 blocking experiments. The expression of TNF RI and FAS/CD95 receptor was evaluated by flow cytometry using the corresponding antibody and PE-conjugated secondary antibody. Results : $IFN{\gamma}$ or $TNF{\alpha}$ alone had no demonstrable cytotoxic effects, whereas both cytokines in combination induced apoptosis synergistically in CHLA-15 and CHLA-90 cells. Although there was no cytotoxicity with the ligation of CH-11 alone in CHLA-90 cells, pretreatment of $IFN{\gamma}$ increased the sensitivity of CH-11-mediated apoptosis. The expression of TNFRI and FAS/CD95R were non-specifically enhanced after treatment of $IFN{\gamma}$ without relation to sensitivity to $TNF{\alpha}$ and CH-11. This finding suggest up-regulation of both receptors may contribute to sensitization of $TNF{\alpha}$ and CH-11-mediated apoptosis by $IFN{\gamma}$ in only sensitive cell lines. Conclusion : $IFN{\gamma}$ induced sensitization of $TNF{\alpha}$ and agonistic FAS/CD95 antibody-mediated apoptosis on some neuroblastoma cells through up-regulation of TNFRI and FAS/CD95 receptor.

• Korean journal of applied entomology
• /
• v.16 no.1 s.30
• /
• pp.1-6
• /
• 1977

The 'Kresek' disease in Korea caused by Xanthomonas oryzae was first found from eight counties in Jeon-nam and Kyungnam province in 1976. The study has been carried mainly on the grouping of pathogens and reproduction of the symptoms on Milyang #23, the variety had shown severe damages at the fields, by using the isolates from Hwa-sun and Kwang-san counties where the first epidemics took place. 1. The 'Kresek' disease was found mainly on Milyang #23, a new variety, at Hwa-sun, Mu-an, Kang-jin. Yung-am, Gog-sung counties in Jeon-nam province and Jin-yang county in Kyung-nam province. 2. The groups of 'Kresek' causing pathogens were the same of those producing bacterial leaf blight symptoms such as group I , II, IN and V of Xanthomonas oryzae. 3. Seventeen out of 21 isolates from Hwa-sun county where the first and severe damage found belonged to group IV, 2 to group II and 2 to group V All of 5 isolates from Kwang-san county belonged to the group IN. 4. The 'Kresek' type symptom could reproduced within 5 days after inoculation to seedlings by using root tut, spray and needle inoculation methods. j. The most of effective method for the inoculation was root cut, and then were spray and needle method. respectively. The higher concentration of inoculum produced the higher disease incidence.