국내 건축구조물의 내진설계기준에 의하면 현장탄성파시험으로 전단파속도를 측정하여 지반을 5종으로 분류하고 이에 의해 건축물에 작용하는 지진하중을 산정하고 있으나 공정상 성토지반에 대해서는 현장탄성파시험을 할 수 없다. 이에 실내에서 간편하게 현장의 상황을 고려하여 전단파속도를 추정할 수 있는 방법을 찾고자 공진주/비틂전단시험과 각종 현장 탄성파 시험결과를 비교 분석하였다. 분석결과 성토체의 구속압을 적절히 고려할 경우 현장탄성파 시험결과와 매우 유사한 결과를 얻을 수 있었다. 또한, 공진주/비틂전단시험에 의해 최대 전단탄성계수와 구속압의 영향평가를 실시한 결과 n값이 0.434~0.561의 일반적 범위의 값을 나타내어 공진주/비틂전단시험으로도 현장지반 전단탄성계수를 유용하게 추정할 수 있는 것으로 나타났다.
본 연구는 기술금융에 사용되는 '미래 진보성' 중심의 기술력 평가모형을 이용하여 기업의 고활동성 여부에 대한 사전적(Ex-ante) 판별력 검증을 목적으로 한다. 분석 대상기업을 업종(제조업군/비(非)제조업군)과 업력(창업기업군/비(非)창업기업군)으로 구분한 후 해당 군집의 평균 총자산회전율 2배 이상을 달성한 기업을 고활동성 중소기업으로 정의하였다. 의사결정나무 모형 중 하나인 C5.0 기법을 적용하여 판별모형을 작성한 결과 모든 업종과 업력에서 99% 이상의 분류정확도를 보였으며, 모형의 판별력이 안정적임을 확인하였다. 분석 결과 경영진 전문성, 자본참여도, 자금조달능력 항목은 업종·업력과 무관하게 고활동성 중소기업 여부를 결정하는 중요변수로 확인되었으며, 제조업군에서는 기술경영능력과 기술수명주기 또한 고활동성 중소기업 여부를 결정하는 평가항목임이 확인되었다. 이를 통해 기술력 평가항목을 이용하여 고활동성 중소기업 여부에 대한 사전적 판별 및 정책적 활용에 대한 가능성을 일정부분 확인할 수 있었다.
이동 컴퓨팅(Mobile Computing)환경에서 빈번한 접속 단절은 클라이언트의 캐시 일관성(Consistency)문제로 직결된다. 이러한 캐시 일관성 문제를 해결하기 위해 무효화 보고(Invalidation Report)에 관한 연구가 진행되고 있다. 그러나 기존의 무효화 보고 기법은 서버 측의 데이타의 수가 많아지거나, 갱신(Update)되는 데이타의 양이 증가하게 되면 무효화 보고 기법의 크기의 증가 및 캐시 효율성의 저하를 가지고 온다. 또한 캐시 전체의 무효화를 확인하는 보고 기법은 선택적 청취(Selective tuning)를 지원하지 못한다. 본 논문에서는 이러한 기존 방식의 문제점을 해결하며 효율성을 개선한 무효화 보고 기법으로써 TTCI(Timestamp Tree-based Cache Invalidation scheme)를 제안한다. 갱신된 데이타의 타임스탬프를 이용하여 타임스탬프 트리를 구성하고 데이타의 아이디를 갱신된 순서대로 나열하여 무효화 보고를 만든다. 이를 활용하게 되면 각 클라이언트는 자신의 단절(Disconnect)된 시점에 맞는 정보를 확인하여 캐시의 이용률을 증가 시킬 수 있다. 또한 트리 구조를 이용하여 선택적 청취를 가능하게 함으로써 클라이언트의 자원 소비를 줄일 수 있다. 이러한 본 구조의 효율성을 검증하기 위해 기존의 기법인 DRCI(Dual-Report Cache Invalidation)와 성능비교를 실시한다.
The purpose of present study was to evaluate the effect of endurance exercise training on skeletal muscle free amino acid concentrations, and differences in free amino acid concentration between soleus muscle which consists of mostly slow twitch oxidative fiber and extensor digitorum longus muscle which consists of fast twitch oxidative glycolytic fiber. Sixteen male SD rats (4 weeks old) were randomly devided into two groups, and fed a purified AIN-93M diet with or without aerobic exercise training according to the protocol (running on the treadmill at 25 m/min for 60 min, 5 days a week) for 6 weeks. Exercise-training for 6 weeks significanly reduced the commulative body weight gain (p<0.05) and food efficiency ratio (p<0.01) of rats. The result showing mitochondrial citrate synthase activity of soleus muscle was significantly higher in exercise-trained rats compared to the value for control animals (p<0.01) indicates aerobic exercise-training was successfully accomplished in the trained group. No difference was found in the muscle aminogram pattern between soleus muscle and extensor digitorum longus muscle of control animals. However, free amino acid concentrations of soleus muscle were from 1.2 to 3.9 times of those found in extensor digitorum longus muscle of control rats, depending on an individual amino acid. Intermediate level of endurance exercise training for 6 weeks did not influence concentrations of most of free amino acid in soleus muscle of rats collected at an overnight fasted and rested state. In contrast, isolucine and leucine concentrations in extensor digitorum longus muscle of exercise-trained rats were significantly lower than those for control animals. These results indicate that aerobic energy metabolism had not been efficiently conducted, and thereby the utilization of BCAA for energy substrate was enhanced in fast twitch oxidative glycolytic fibers of extensor digitorum longus muscle of rats followed exercise-training protocol for 6 weeks.
본 연구에서는 증발산 원리를 이용한 최종복토층 공법의 재료로서 석탄회와 인산석고의 활용성에 대해서 고려하였다. 복토재료는 일반 화강암질 풍화토에 석탄회와 인산석고를 혼합하는 것으로 하고 이에 따른 환경적 영향을 예측하기 위해서 실내용출시험, 컬럼실험, 현장 모형실험을 순서적으로 실시하였다. 용출실험 결과에서 각 혼합물의 중금속 함유량은 규정값 이하로 나타났으며, 관계규정과 컬럼실험의 결과를 컴토하여 재료간 최적 배합비율은 토양(4):석탄재(1):인산석회(1)로 결정하여 현장모형실험에 적용하였다. 환경적 평가를 위한 현장모형실험은 2004년 2월에서 6월까지 진행하였는데, 실험기간 중 혼합 복토재와 우수에 의해 발생되는 침출수의 관찰결과에서는 본 연구에서 고려한 혼합재료가 환경적으로 안전하게 사용될 수 있는 것으로 나타났다.
ISWANTO, Apri Heri;HAKIM, Arif Rahman;AZHAR, Irawati;WIRJOSENTONO, Basuki;PRABUNINGRUM, Dita Sari
Journal of the Korean Wood Science and Technology
/
제48권1호
/
pp.32-40
/
2020
While the utilization of wood as a raw material in related industries has been increasing with the population increasing, the availability of wood from natural forests has continued to decline. An alternative to this situation is the manufacture of particleboard from non-wood lignocellulose materials through the modification of sandwich particleboard (SPb) using bamboo strands as reinforcement. In this study, strandsof belangke bamboo (Gigantochloa pruriens W) and tali bamboo (Gigantochloa apus) were utilized. The non-wood particles included sugar palm fibers, cornstalk, and sugarcane bagasse. The board was made in a three-layer composition of the face, back, and core in a ratio of 1: 2: 1. The binder used was 8% isocyanate resin. The sheet was pressed at a temperature of 160℃ for 5 min under a pressure of 3.0 N/㎟. Testing included physical and mechanical properties based on the JIS A 5908 (2003) standard, while acoustic testing was based on ISO 11654 (1997) standards. The results showed that using bamboo strands as reinforcement has an effect on the mechanical and physical properties of SPb. Almost all the types of boards met the JIS A 5908 (2003) standards, with the exception of thickness swelling (TS) and internal bond (IB) parameters. Based on the thickness swelling parameter, the C-type board exhibited the best properties. Overall, the B-type board thatused a belangke bamboo strand for the surface and sugarcane bagasse as the core underwent the best treatment. Based on the acoustical parameter, boards using a tali bamboo strand for the surface and sugar palm fiber as the core (E-type board) exhibited good sound absorption properties.
Sharath, S.;Gayana, B.C.;Reddy, Krishna R.;Chandar, K. Ram
Advances in concrete construction
/
제8권3호
/
pp.239-246
/
2019
Substitution of natural fine aggregates with industrial by-products like precious slag balls (PS Balls) offers various advantages like technical, economic and environmental which are very important in the present era of sustainability in construction industry. PS balls are manufactured by subjecting steel slag to slag atomizing Technology (SAT) which imparts them the desirable characteristics of fine aggregates. The main objective of this research paper is to assess the feasibility of producing good quality concrete by using PS balls, to identify the potential benefits by their incorporation and to provide solution for increasing their utilization in concrete applications. The study investigates the effect of PS balls as partial replacement of fine aggregates in various percentages (20%, 40%, 60%, 80% and 100%) on mechanical properties of concrete such as compressive strength, splitting tensile strength, and flexural strength. The optimum mix was found to be at 40% replacement of PS balls with maximum strength of 62.89 MPa at 28 days curing. Permeability of concrete was performed and it resulted in a more durable concrete with replacement of PS balls at 40% and 100% as fine aggregates. These two specific values were considered as optimum replacement is 40% and also the maximum possible replacement is 100%. Scanning electron microscope (SEM) analysis was done and it was found that the PS balls in concrete were unaffected and with optimum percentage of PS balls as fine aggregates in concrete resulted in good strength and less cracks. Hence, it is possible to produce good workable concrete with low water to cement ratio and higher strength concrete by incorporating PS balls.
본 연구에서는 기본적인 평면 태양 전지 구조에 1차원 주기를 가지는 에미터 전극 배치를 통해 광학 및 전기적 효율을 최적화하는 설계방법을 제안한다. 에미터 전극의 주기가 줄어들면 애퍼처 비율이 감소해 빛 흡수율이 줄어들어 태양 전지 성능 저하에 영향을 끼친다. 본 연구에서는 시뮬레이션을 통해 가장 간단한 평판형 태양 전지 구조 내에서 에미터 전극 배열의 최적안을 제시하였다. 광학적 측면에서 에미터 전극이 없이 광흡수층 전면에서의 광흡수를 하는 레퍼런스 소자와 성능이 유사한 조건을 도출했다. 그리고 광흡수 및 전기적 효율 측면을 모두 고려하여 가장 효과적인 전극 구조를 제안하였다. 본 연구 결과는 광전 변환으로 생성된 전하를 전극으로 가장 효율적으로 전달할 수 있는 구조를 제안함으로써, 대체 에너지원에서 큰 비중을 차지하고 있는 태양 전지의 활용성을 높이는데 기여할 것이다.
Purpose: This study conducted an economic evaluation of hospital-based home care services for the patients who had undergone breast cancer surgery. Methods: A total of 12,483 patients over 18 years of age who had received breast cancer surgery in 26 tertiary hospitals in 2018 were analyzed with the claim data from the Health Insurance Review & Assessment Service using cost-minimization analysis and societal perspectives. Results: There were 156 patients who utilized hospital-based home care services within 30 days after breast cancer surgery, and they received 2.17 (SD=1.17) hospital-based home care service on average. The average total cost was 5,250,028 KRW (SD=1,905,428) for the group receiving continuous hospital-based home care and 6,113,402 KRW (SD=2,033,739) for the group not receiving continuous hospital-based home care (p<.001). The results of the economic evaluation of continuous hospital-based home care services in patients who had undergone breast cancer surgery indicated a total benefit of 953,691,000 KRW, a total cost of 819,004,000 KRW, and a benefit-cost ratio of 1.16 in 2018. Conclusion: Continuous hospital-based home care was considered economically feasible as the total costs for the group receiving continuous hospital-based home care were lower than those of the group not receiving continuous hospital-based home care. Therefore, policy modification and financial incentives are recommended to increase the utilization of hospital-based home care services for patients who had undergone breast cancer surgery.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.