• 전기학회논문지P
• /
• 제58권2호
• /
• pp.122-129
• /
• 2009

Frequency is an important operating parameter of a power system. It is essential that the frequency of a power system be maintained very close to its nominal frequency. And frequency measurement devices have need to measure a fast and accurate of frequency using voltage signals. This paper proposes a comparative study of frequency estimation techniques using the high speed FIR filter based algorithm, the DFT filter based algorithm using phasor angle between two phasors, and positive sequence component based algorithm using the half angle between two successive positions of phasor. The discussed three techniques have been formed through numerical manipulation of a discrete system. The proposed techniques have been tested using signals obtained from selected power system model using ATP simulation package. Some test results are shown in this paper.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.840-843
• /
• 2006

The aim of this study was to detect landslide using satellite image and apply the landslide to probabilistic landslide-susceptibility mapping at Gangneung area, Korea using a Geographic Information System (GIS). Landslide locations were identified by change detection technique of KOMSAT-1 (Korea Multipurpose Satellite) EOC (Electro Optical Camera) images and checked in field. For landslide-susceptibility mapping, maps of the topography, geology, soil, forest, lineaments, and land cover were constructed from the spatial data sets. Then, the sixteen factors that influence landslide occurrence were extracted from the database. Using the factors and detected landslide, the relationships were calculated using frequency ratio, one of the probabilistic model. Then, landslide-susceptibility map was drawn using the frequency ration and finally, the map was verified by comparing with existing landslide locations. As the verification result, the prediction accuracy showed 86.76%. The landslide-susceptibility map can be used to reduce hazards associated with landslides and to land cover planning.

• 대한인간공학회지
• /
• 제18권3호
• /
• pp.127-140
• /
• 1999

In order to apply three-dimensional images to industries, the possibility of realizing three-dimensional images should be ensured and when operating a task using three-dimensional images, the intention of the observer and the result of operation should be precisely related. The aim of this paper is to investigate the task performance of a human operator during operating a robot manipulator using three-dimensional and two-dimensional image displays. From the result of this research, it was found that the accuracy of robot operation in the case of using three-dimensional displays is much higher than in the case of using two-dimensional displays and the adapting time to the operating task using three-dimensional displays is shorter than that using two-dimensional displays. From such results, we concluded that the application of three-dimensional displays, which can closely reflect real environment, to industries is desirable.

• 대한전자공학회논문지
• /
• 제27권12호
• /
• pp.1841-1851
• /
• 1990

Self-aligned gate GaAs MESFETs using ion beam deposited tungsten applicable to GaAs LSI fabrication process have been fabricated. Silicon implanted samples were annealed using isothermla two step RTA process and conventional one step RTA process. The electrical and physicla characteristics of annealed samples were investigated using Hall and I-V measurements. As results of measurements, activation characteristics of the isothermal two step RTA process are better than those of one step annealed ones. Using the developed processes, GaAs SAFETs (Self-Aligned Gate FET) have been fabricated and electdrical characteirstics are measured. As results, subthreshold currents of SAGFETs are 6x10**-10 A/\ulcorner, that is compatible to conventional MESFET, maximum transconductances of 0.75\ulcorner gate MESFET using one step RTA process and 2\ulcorner gate MESFET using isothermal two step RTA process are 18 mS/mm, 41 mS/mm respectively.

• 전자공학회논문지B
• /
• 제30B권2호
• /
• pp.51-58
• /
• 1993

This paper describes the development of a speaker-dependent isolated word recognizer as applied to voice dialing in a car noise environment. for this purpose, several methods to improve performance under such condition are evaluated using database collected in a small car moving at 100km/h The main features of the recognizer are as follow: The endpoint detection error can be reduced by using the magnitude of the signal which is inverse filtered by the AR model of the background noise, and it can be compensated by using variants of the DTW algorithm. To remove the noise, an autocorrelation subtraction method is used with the constraint that residual energy obtainable by linear predictive analysis should be positive. By using the noise rubust distance measure, distortion of the feature vector is minimized. The speech recognizer is implemented using the Motorola DSP56001(24-bit general purpose digital signal processor). The recognition database is composed of 50 Korean names spoken by 3 male speakers. The recognition error rate of the system is reduced to 4.3% using a single reference pattern for each word and 1.5% using 2 reference patterns for each word.

• 전자공학회논문지S
• /
• 제34S권10호
• /
• pp.71-79
• /
• 1997

This paper introduces a methodology of the precise control of a mobile/task robot using visual information captured bythe camera attached at the hand of the task robot. The major problem residing in the precise control of mobile/task robot is providing an accurate and stable base for the task robot through the precise control of mobile robot. On account of uncertainties on the surface, the precise control of mobile robot is not feasible without using external position sensor. In this paper, the methodology for the precise control of mobile robot is proposed, which recognizes the position of mobile robot using the camera attached at the hand of the task robot. While the task robot is approaching to an assembly part, the position of mobile robot is measured using the line correspondence between the image capturesd by the camera and the real assembly part, and using the kinematic transformation from the hand of the task robot to the mobile robot. To verify the solidness of this method, experimental data for the measurement of camera position/orientation and for the precise control of mobile robot using measurement are shown.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2492-2497
• /
• 2009

In this paper, a user application based on ZigBee is developed using UML. Conventional development procedure for an application using ZigBee stack requires a tremendous effort, since a developer has to study programming interfaces and analyze sample code to modify and add necessary code. In this study, a sample user application based on ZigBee is modeled using UML and embedded software code is generated using an automatic code generation tool. If the application development method using UML proposed in this paper is used, it is possible for a user to easily develop an application using powerful notations of UML diagrams without paying attention to the details of complex programming code.

• East Asian mathematical journal
• /
• 제26권2호
• /
• pp.141-150
• /
• 2010

In this study, we study on the length of bisector of angle by the method using the area, the method using the vector and the method using the similarity, also the length of trisector of angle by the method using the sine law, the method using the area and the method using the second law of cosine in triangle, respectively. And we study on the length of trisector of angle with the length of bisector in angle. This study is expected to use the learning materials for the interesting construction and the problem solving using trigonometric functions.

• 디지털산업정보학회논문지
• /
• 제6권4호
• /
• pp.217-223
• /
• 2010

In the case of image magnification by using interpolation methods, interpolated pixels are estimated from the known pixels in source image. The magnified image is composed of the known pixels in source image and the interpolated pixels which is estimated. If the interpolated pixels are estimated to have the locality which is exists in real images, the magnified image is much closer to the real image. In this paper, an improved interpolation scheme is proposed to estimate pixels from the known pixels in source image using the locality which is exists in real images. The magnified image by using the proposed interpolation scheme is much closer to the real image. The performance of the proposed interpolation scheme is evaluated by using PSNR(Peak Signal to Noise Ratio) in experiment. The PSNR of the magnified image by using the proposed scheme is improved than that of the magnified images by using existing interpolation methods. So, the proposed interpolation scheme is an efficient interpolation method for the quality improvement of magnified image.

• 한국정보처리학회논문지
• /
• 제7권5S호
• /
• pp.1599-1608
• /
• 2000

Automated collaborative filtering is on the verge of becoming a popular technique to reduce overloaded information as well as to solve the problems that content-based information filtering systems cannot handle. In this paper, we describe three different algorithms that perform collaborative filtering: GroupLens that is th traditional technique; Best N, the modified one; and an algorithm that uses clustering. Based on the exeprimental results using real data, the algorithm using clustering is compared with the existing representative collaborative filtering agent algorithms such as GroupLens and Best N. The experimental results indicate that the algorithms using clustering is similar to Best N and better than GroupLens for prediction accuracy. The results also demonstrate that the algorithm using clustering produces the best performance according to the standard deviation of error rate. This means that the algorithm using clustering gives the most stable and the best uniform recommendation. In addition, the algorithm using clustering reduces the time of recommendation.