• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.97-107
• /
• 2013

On the Staggered Crosswalks, pedestrians cross the crosswalks two times. This method can reduce the cycle, the vehicle delay and the walking distance by increasing the major direction of green time. The safety of pedestrians is also effective. This study suggests the warrant of the facilities of island width and length etc. by considering the road structure and pedestrians. Also this study suggests the standard of the safety through the accident analysis of Staggered crosswalks and General Crosswalks. In the results, accident rate of the Staggered Crosswalks 18.3(100 million vehicle-km) was lower than the accident rate of the General Crosswalks 28.3(100million vehicle-km). By understanding the start point of crossing of the Staggered Crosswalks, the analysis of the location and types of accident suggests the safety zone(spare space). The setting warrants of Staggered Crosswalks are 4 lane over the road and the 2 meter over sidewalk width of island. The minimum length of the Pedestrian island was doubled compared to the crosswalks width. And the maximum length was set by considering the wait time of the pedestrians.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.1
• /
• pp.115-126
• /
• 2018

A new urban paradigm that moves from a vehicle-centric to pedestrian-centric culture should be considered to improve the quality of the pedestrian environments for women, children, senior citizens, and disabled persons as well as to promote community unification by providing general movement rights to everyone. This study was implemented to provide decent alternatives to improve street spaces. The street spaces around the Commercial and Residential Area No.1 located in the Administrative-Centered City, Sejong Special Autonomic City, were selected to analyze and define the status of the walkways and the street spaces. Satellite imagery and numerical maps were used to collect geographic data. Practical and actual surveys for the selected sites were performed to analyze the street status and the pedestrian status. Based on the all collected data, analysis results, and literature reviews, the questionnaire was made, and 315 inquiries qualified for analysis. The physical status of all four study sites was the highest level, Grade A, and green open spaces were relatively sufficient. As a result, the factors obtained from the factor analysis have an impact on the satisfaction of the pedestrian streets in the commercial area. The factors are as followed Design > Convenience > Roadside trees and rest areas > Safety > Safety protective facilities > Transportation and information facilities > Continuity > Basic state of road surfaces > Comfortability, and in the residential area: Transportation and information facilities > Basic state of road surfaces > Comfort > Convenience > Continuity > Design > Illumination and crime prevention facilities > Safety > Roadside trees and rest areas.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.2
• /
• pp.33-41
• /
• 2018

Large amounts of leaves from street trees fall onto the streets annually and need to be cleaned and treated. Cherry trees are common street trees in Korea. The adsorption characteristics of Pb(II) by cherry leaf (CL) and cherry leaf-derived biochar (CB) were studied through a series of batch experiments. CB was produced through the carbonization of CL at $800^{\circ}C$ for 90 min. Carbonization increased the C content and pH value, while decreased H and O contents. Well developed pore structure was observed at the surface of CB. The pseudo-second order model better described the kinetics of Pb(II) adsorption onto CL and CB, indicating that the rate-limiting step of the heavy metal sorption is chemical sorption. Fast adsorption rates and high adsorption capacities were obtained by the carbonization from CL to CB. Langmuir models better adequately described the Pb(II) adsorption onto CL and CB. Maximum adsorption capacities of Pb(II) expressed by Langmuir constant, $Q^0$ were 37.31 mg/g and 94.34 mg/g, when CL and CB were used as adsorbents, respectively.

• Journal of Korean Society of Forest Science
• /
• v.105 no.4
• /
• pp.422-428
• /
• 2016

Ginkgo (Ginkgo biloba L.) is one of the most appropriate roadside trees because of a good transplantation nature and ability to grow well in urban environment. Ginkgo is a dioecious species. Sex discrimination of ginkgo is possible through comparing morphological characters of reproductive organs. However, it needs more than about twenty years for reproductive organs to appear after sexual maturity. Until now, ginkgo trees for roadside plantation have been planted without discriminating the sex because ginkgo trees have been usually planted before sexual maturity. Ginkgo nuts from the female ginkgo trees planted along the roadside emit a foul odor, and make much pollution on the streets. Thus in this study a novel SCAR marker (SCAR-GBM) for the early sex discrimination was developed. Primers were developed on the basis of the sequence of male-specific RAPD variants reported previously. False-negative problem of SCAR marker, probably caused by dominant nature, was resolved by using multiplex PCR using primers of both the SCAR-GBM and a universal primer set of atp1 region in mitochondria DNA, which resulted in improved discrimination efficiency. The results showed that DNA bands of 1,039 bp were commonly amplified by the atp1 primer set in male and female trees, and SCAR-GBM markers of 675 bp were specifically amplified only in male trees. Reproducible and specific discrimination of the multiplex PCR was finally confirmed by applying multiple male and female individuals.

• The Journal of the Korea Contents Association
• /
• v.17 no.8
• /
• pp.209-225
• /
• 2017

This study examines the effect of residential and neighboring environment on the residents' social exclusion in Daejeon Chokbangchon, the city's slum area. Based on GIS methodology with residents' addresses and other characteristics, this study finds out the feminization and the ageing trends in the central part of this area. Besides, longitudinal data between 2007 to 2016 shows this area's depopulation resulting in people's spread into other parts of the city. This study took pictures of 252 images of in the streets and indoors, analysed them and defined the problems of residential and neighboring environment. According to this picture analysis, the predicaments of this area was categorized into 4 types such as appearance-hygiene, narrowness-lack of residential functions, safety-privacy violation and stigma. This area ranging 1 km from north to south adjacent with Daejeon railway station was divided into 4 sections with different main problems. The follow-up survey for residents living in each section showed each section was different in work state, neighbor satisfaction, stigma and social exclusion. Finally, residential satisfaction was found to be the most important affecting factor on social exclusion. Based on these results, this study suggests government's housing policy on this area to be more enthusiastic and specific to cope with each problems of sections.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.117-122
• /
• 2011

Asphalt concrete pavement can be widely seen on urban streets, highways, parking lots, and bike trails. Asphalt concrete pavement is relatively temperature sensitive materials due to the viscoelastic behavior, which can be defined as flexible performance in summer and rigid performance in winter. In terms of maintenance, it can be fixed quite easily if damaged. In addition, asphalt concrete pavement is generally found to be black and grey in color. However, several colors can be adopted to change the appearance of plain old boring, black and grey. Generally, there are two types of color systems in hot mix asphalt concrete materials. One system uses colored cementitious material that is applied to pavement surface through coating the surface of the asphalt pavement. The major disadvantage to this system requires a careful skill set to be used on the construction site in order to prevent taking off the cementitious material. The other coloring system colors the asphalt hot mixtures through using color additives. The main advantage to this system is that the asphalt pavement layer is colored using the same techniques that are already used in paving. The disadvantage is that the colors are limited to mainly reds and browns. In this study, a suggested color additive was evaluated, based on rutting, moisture sensitivity, and fatigue cracking performance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.263-270
• /
• 2020

This study evaluates the structural behavior of connected long-span beams applied for excavation in urban areas with a narrow street. Generally, the reliability of the connection is reduced owing to the defect of the upper flange in the connection. An improved connection part was developed to complement the defects in the connected long-span beam. A finite element analysis based on a commercial program, ABAQUS, was employed to evaluate the behavior of the improved connection part. A numerical analysis model was proposed to analyze the high-strength bolt connection and the composite behavior of steel and concrete applied to the improved connection. The suitability of the proposed numerical analysis was verified by comparing the experimental and numerical analysis results of the references. Using the proposed numerical analysis method, the improved and general connections were analyzed and compared with each other. The stress distribution and elastic-plastic behavior of the long-span beam were analyzed numerically. The analysis confirmed that 25% of the compressive stress was improved, resulting in the improvement of structural safety and performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.132-142
• /
• 2014

In this paper, we propose a traffic lights detection method using visual attention and spot-lights detection. To detect traffic lights in city streets at day and night time, the proposed method is used the structural form of a traffic lights such as colors, intensity, shape, textures. In general, traffic lights are installed at a position to increase the visibility of the drivers. The proposed method detects the candidate traffic lights regions using the top-down visual saliency model and spot-lights detect models. The visual saliency and spot-lights regions are positions of its difference from the neighboring locations in multiple features and multiple scales. For detecting traffic lights, by not using a color thresholding method, the proposed method can be applied to urban environments of variety changes in illumination and night times.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.837-844
• /
• 2017

Generally, V/C ratio in uninterrupted traffic flow and average travel speed in interrupted traffic flow are utilized as measure of effect for assessing operational situation of roads. The set of road conditions and traffic conditions are considered to be major variables for assessing operational situation in the traffic flow. However, weather conditions such as rainfall also affect the operational situation of roads. The studies reflected by the rainy situation are conducted in the uninterrupted flow, but the related studies are insufficient in the interrupted flow. In this study, the modification factors during rainfall in the interrupted flow were suggested, and the factors could be used when calculating the average travel speed during rainfall in the interrupted flow. By utilizing the data that were investigated in the same road and traffic conditions and the different weather conditions (rainy day or clear day), the modification factors were founded on regression analysis of the travel speed during rainfall as a dependent variable. Modification factors was suggested in dividing peak time, non-peak time, and whole period. Based on this study, the modification factors can be used to complementing the average travel speed model for assessing the operational situation of urban streets during rainfall.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.11-23
• /
• 2011

The objective of this paper is to develop a daily pattern clustering algorithm using historical traffic data that can reliably detect under various traffic flow conditions in urban streets. The developed algorithm in this paper is categorized into two major parts, that is to say a macroscopic and a microscopic points of view. First of all, a macroscopic analysis process deduces a daily peak/non-peak hour and emphasis analysis time zones based on the speed time-series. A microscopic analysis process clusters a daily pattern compared with a similarity between individuals or between individual and group. The name of the developed algorithm in microscopic analysis process is called "Two-step speed clustering (TSC) algorithm". TSC algorithm improves the accuracy of a daily pattern clustering based on the time-series speed variation data. The experiments of the algorithm have been conducted with point detector data, installed at a Ansan city, and verified through comparison with a clustering techniques using SPSS. Our efforts in this study are expected to contribute to developing pattern-based information processing, operations management of daily recurrent congestion, improvement of daily signal optimization based on TOD plans.