• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.3
• /
• pp.1-9
• /
• 1997

We present an extension of the well-known generalized upper bound (GUB) constraint and consider a linear knapsack problem with both the extended GUB constraints and the simple upper bound (SUB) constraints. An efficient algorithm of order O($n^2log n$) is developed by exploiting structural properties and applying binary search to ordered solution sets, where n is the total number of variables. A numerical example is presented.

• Bulletin of the Korean Mathematical Society
• /
• v.41 no.2
• /
• pp.371-385
• /
• 2004

In this paper, we investigate the uniqueness of positive solutions to weak competition models with self-cross diffusion rates under homogeneous Dirichlet boundary conditions. The methods employed are upper-lower solution technique and the variational characterization of eigenvalues.

• Journal of applied mathematics & informatics
• /
• v.27 no.5_6
• /
• pp.1361-1370
• /
• 2009

In this paper, we consider singular fourth-order two point boundary value problems $u^{(4)}$ (t) = f(t, u), 0 < t < 1, u(0) = u(l) = u'(0) = u'(l) = 0, where $f:(0,1){\times}(0,+{\infty}){\rightarrow}[0,+{\infty})$ may be singular at t = 0, 1 and u = 0. By using the upper and lower solution method, we obtained the existence of positive solutions to the above boundary value problems. An example is also given to illustrate the obtained theorems.

• Journal of the Korean Mathematical Society
• /
• v.49 no.1
• /
• pp.153-164
• /
• 2012

In this paper, we study the existence, non-existence, and multiplicity of positive solutions for a coupled telegraph system using the xed-point theorem of cone expansion/compression type, the upper-lowe solutions method, and xed point index theory.

• Journal of applied mathematics & informatics
• /
• v.28 no.3_4
• /
• pp.625-637
• /
• 2010

In this paper, we are concerned with the quasilinear elliptic systems with boundary blow-up conditions in a smooth bounded domain. Using the method of lower and upper solutions, we prove the sufficient conditions for the existence of the positive solution. Our main results are new and extend the results in [Mingxin Wang, Lei Wei, Existence and boundary blow-up rates of solutions for boundary blow-up elliptic systems, Nonlinear Analysis(In Press)].

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.5
• /
• pp.827-837
• /
• 1994

This paper presents robustness propertis of the Kalman Fiter and the associated LQG/LTR method for linear time-invariant output-delayed systems. It is shown that, even for minimum phase plants, the LQG/LTR method can not recover the target loop transfer function. Instead, an upper bound on the recovery error is obtained using an upper bound of the solution of the Kalman filter Riccati equations. Finally, some dual properties between output-delayed systems and input-delayed systems are exploited.

• Honam Mathematical Journal
• /
• v.43 no.4
• /
• pp.667-678
• /
• 2021

Blow-up phenomena for a nonlocal reaction-diffusion system with time-dependent coefficients are investigated under null Dirichlet boundary conditions. Using Kaplan's method with the comparison principle, we establish new blow-up criteria and obtain the upper bounds for the blow-up time of the solution under suitable measure sense in the whole-dimensional space.

• Journal of Powder Materials
• /
• v.20 no.4
• /
• pp.302-307
• /
• 2013

A5J32-T4 and A5052-H32 dissimilar aluminum alloy plates with thickness of 1.6 and 1.5 mm were welded by friction stir lap welding (FSLW). The FSLW were studied using different probe length tool and various welding conditions which is rotation speed of 1000, 1500 rpm and welding speed of 100 to 600 mm/min and material arrangement, respectively. The effects of plunge depth of tool and welding conditions on tensile properties and weld nugget formation. The results showed that three type nugget shapes such as hooking, void, sound have been observed with revolutionary pitch. This plunge depth and material arrangement were found to effect on the void and hooking formation, which in turn significantly influenced the mechanical properties. The maximum joint efficiency of the FSLWed plates was about 90% compared to base metal, A5052-H32 when the A5052-H32 was positioned upper plate and plunge depth was positioned at near interface between upper and lower plates.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.694-700
• /
• 2007

Recently, a new cellular metal, WBK(Wire woven Bulk Kagome) has been introduced. WBK is fabricated by assembling metal wires in six directions into a Kagome-like truss structure and by brazing it at all the crossings. Wires as the raw material are easy to handle and to attain high strength with minimum defect. And the strength and energy absorption are superior to previous cellular metals. Therefore, WBK seems to be promising once the fabrication process for mass production is developed. In this paper, an upper bound solution for the mechanical properties of the bulk WBK under compression is presented. In order to simulate uniform behavior of WBK consisted of perfectly uniform cells, a unit cell of WBK with periodic boundary conditions is analyzed by the finite element method. In comparison with experimental test results, it is found that the solution provides a good approximation of the mechanical properties of bulk WBK cellular metals except for Young's modulus. And also, the brazing joint size does not have any significant effect on the properties with an exception of an idealized thin joint.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.461-469
• /
• 2017

A segment of the wave board has been expressed as a submerged line segment in the two dimensional wave flume. The lower end of the line segment could be extended to the bottom of the wave flume and the other opposite upper end of the board could be extended to the free surface. It is assumed that the motion of the wave board could be defined by the sinusoidal motion in horizontal direction on either end of the wave board. When the amplitude of sinusoidal motion of the wave board on lower and upper end are equal, the wave board motion could express the horizontally oscillating submerged segment of piston type wave generator. The submerged segment of flap type wave generator also could be expressed by taking the motion amplitude differently for the either end of the board. The pivot point of the segment motion could play a role of hinge point of the flap type wave generator. Simplified analytic solution of oscillating submerged wave board segment in water of finite depth has been derived through the first order perturbation method at two dimensional domain. The case study of the analytic solution has been carried out and it is found out that the solution could be utilized for the design of wave generator with arbitrary shape by linear superposition.