• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.188-198
• /
• 1994

The distributed arithmetic approach has been commonly recognized as an efficient method to implement the inner-product type of computation with fixed coefficients such as DCT/IDCT. This paper presents a novel architecture and the implementation of 2-D DCT/IDCT VLSI chip based on distributed arithmetic. The main feature of the proposed architecture is a fully 2-bit serial pipeline and parallel structure with memory-based signal processing circuitry, which is efficient to the implementation of the bit-serial operation of distributed arithmetic. All modules of the proposed architecture are designed with NP-dynamic circuitry to reduce the power consumption and to increase the performance. This chip is applicable in HDTV systems working at video sampling rate up to 75 MHz.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.256-261
• /
• 2011

We demonstrate 3-Gb/s wireless link using a 60-GHz receiver front-end fabricated in $0.25-{\mu}m$ SiGe:C bipolar complementary metal oxide semiconductor (BiCMOS) and a mixed-mode quadrature phase-shift keying (QPSK) demodulator fabricated in 60-nm CMOS. The 60-GHz receiver consists of a low-noise amplifier and a down-conversion mixer. It has the peak conversion gain of 16 dB at 62 GHz and the 3-dB intermediate-frequency bandwidth of 6 GHz. The demodulator using 1-bit sampling scheme can demodulate up to 4.8-Gb/s QPSK signals. We achieve successful transmission of 3-Gb/s data in 60 GHz through 2-m wireless link.

• Korean Journal of Health Education and Promotion
• /
• v.15 no.1
• /
• pp.165-178
• /
• 1998

The purpose of this explanatory study was to provide baseline information on the secondary prevention health behavior of cervical cancer in Korea which was related to the utilization of the Papanicolaou (Pap) smear screening test. The secondary data from the 1992 Korean Health Behavior Survey was used for analysis in order to determine sociodemographic profiles and the predictor variables. The sample analyzed for this study contained 1,489 Korean women residing in Korea aged 20-59 selected by multi-stage sampling method from the 1990 Korean census. Univariate, bivariate, and logistic regression analysis were performed to produce the findings of this study. Only 27.9% of the study sample had had a Pap test in 1992. It was found that the relative sociodemographic profiles of the Pap test between users and non-users were distinctive. The predictors variables were age, marital status, educational status, usual source of care, perceived household economic status, health check-up, and presence of chronic diseases

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.109-110
• /
• 2007

본 논문에서는 베이시안 초해상도 영상처리시 저해상도 영상들을 고해상도 격자에 맞게 정합해서 업샘플링(upsampling)을 하는 새로운 방식에 대해 제안한다. 제안하는 업샘플링 방식은 각 장을 따로 보간하는 방식과 달리 여러 저해상도 영상의 고주파 정보가 고해상도 영상 격자의 모든 위치에 적절히 영향을 미칠 수 있도록 여러 장의 저해상도 영상의 고주파 정보를 함께 사용하여 보간한다. 보간하는 방법은 B-스플라인 (B-Spline) 기반 비정규 리샘플링(non-uniform resampling)을 기반으로 초해상도 영상처리에 맞도록 적용한다. 실험결과를 통해 일반적으로 적용되는 0-삽입(zero-padding) 업샘플링 방식과 쌍일차 보간법(bilinear interpolation) 등을 적용할 때의 효과를 살펴보고, 제안하는 방식이 일반적인 방식을 사용하는 것에 비해 정량적, 정성적으로 고해상도 정보를 더 정확히 생성해내는 것을 확인한다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.756-761
• /
• 2013

This paper propose the new demodulation method that can detect resolver signal's peak at the time of position estimation when the position information is required during current controller period. The proposed method is performed in a synchronous demodulation way with exciting signal and also cover a capability which can compensate the lag element of exciting signal caused by the resolver's inductive component and filter circuit. This paper carried out the experiment to investigate the validity and performance of the suggested method by using the test board made up of DSP and demodulation circuit. The test results show that the proposed method is theoretically clear and work completely as expected from making sure of sampling resolver signal's peak at the time of position estimation. In addition, Software position tracking algorithm is executed with the demodulated signals generated by the suggested method and an exact position can be estimated.

• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.73-75
• /
• 2005

In present measurement of moisture contents is used as one of method for estimating degradation of transformer. Most of people use Karl-Fischer titration method for detection moisture contents but this measurement is inconvenient method because we must analyze transformer oil-paper after dismounting transformer and sampling in field. Therefore we don't directly investigate them in field. In this paper we will introduce Recovery Voltage Method(RVM) that is new method for estimating measurement in field though dismounting facility. For measure of moisture contents using RVM in accordance with accelerated thermal aging we have made experimental test cell and aged at a temperature up to 140$^{\circ}C$ for 300 hours. And we have been measured at intervals of 100 hours using RVM 5462 made in fetter company.

• Journal of Plant Biology
• /
• v.33 no.3
• /
• pp.173-182
• /
• 1990

To investigate the structure of the plant community structure of Mt. Yongmun in Kyonggi-do, fifty-four plots were set up by the clumped sampling method. The classification by TWINSPAN and DCA ordination were applied to the study area in order to classify them into several groups based on woody plant and environmental variables. By both techniques, the plant community were divided into two groups by the aspect. the dominant species of south aspect were Pinus densiflora, Quercus aliena, Q. mongolica, Carpinus laxiflora and of north aspect were Q. ongolica, Fraxinus rhynchophylla. The successional trends of tree species in south aspect seem to be from P. densiflora through Q. serrata, Q. aliena, A. mongolica to C. laxiflora. As a result of the analysis for the relationship between the stand scores of DCA and environmental variables, they had a tendency to increase significantly from the P. densiflora and Q. mongolica community to C. laxiflora and F. rhynchophylla community that was the soil moisture, the amount of soil humus and soil pH.

• The Research Journal of the Costume Culture
• /
• v.11 no.6
• /
• pp.879-888
• /
• 2003

Song is a significant message with organic combination of relics and melody. As such, songs could be an important way to deliver messages in the relics and melodies. Among the several kinds of songs ‘popular song’ is the most common and has the strongest effect on the public. On this purpose, total 700 songs published from 1995 to 2001 popular songs have been researched after extracting 100 songs chronologically in regards of broadcasting times, popularity rankings and records of yearly awards during its production year. These selected popular songs have been collected and studied before sampling the expression of the costume included in the relics. Clothes, hair styling, make-up, shoes & purses, accessaries and body figure, etc. are covered In this study. As the recent symbolism embedded in the relics of popular songs is closely related with our generation background, public preference & dislike and the change of modem costume, it shows the symbolism of costumes evidently again.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1324-1331
• /
• 2014

This paper proposes a compensation PWM technique for the extension of output voltage ranges in three-phase VSI applications using three shunt resistors. The proposed technique aims to solve the dead zone, which occurs in high modulation indexes. In the dead zone, two phase currents cannot be sampled correctly, so that the three-phase VSI cannot be operated up to the maximum output voltage. The dead zone is analyzed in detail, and the compensation PWM algorithm is developed. The proposed algorithm is verified by numerical analysis and experimental results.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.6
• /
• pp.588-599
• /
• 1992

This paper describes the variable speed drive of an induction motor by the line commutated inverter, which is operated in the forced commutation mode from start-up to operating point of load commutation. A novel forced-commutation circuit is proposed in this paper. The selection range of leading condenser to decide load commutation starting point is simulated by the sampling data of a general purpose IM and a high speed IM. The experiment to drive IM by a line commutated inverter with the proposed forced commutated circuits is performed. There was no problem in driving IM from standstill to starting point of load commutation by a line commutated inverter with forced commutation.