• Journal of Powder Materials
• /
• v.24 no.1
• /
• pp.24-28
• /
• 2017

Silicon alloys are considered promising anode active materials to replace Li-ion batteries by graphite powder, because they have a relatively high capacity of up to 4200 mAh/g, and are environmentally friendly and inexpensive ECO-materials. However, its poor charge/discharge properties, induced by cracking during cycles, constitute their most serious problem as anode electrode. In order to solve these problems, Si-Ge-Al alloys with porous structure are designed as anode alloy powders, to improve cycling stability. The alloys are melt-spun to obtain the rapidly solidified ribbons, and then ball-milled to make fine powders. The powders are etched using 1 M HCl solution, which gives the powders a porous structure by removing the element Al. Subsequently, in this study, the microstructures and the characteristics of the etched powders are evaluated for application as anode materials. As a result, the etched porous powder shows better electrochemical properties than as-milled Si-Ge-Al powder.

• Transactions of Materials Processing
• /
• v.26 no.6
• /
• pp.356-364
• /
• 2017

In this study, submerged arc cladded Fe-Cr-Ni-Mo-CuWNbV-C stainless steels containing various Cr contents between 11.2 wt.% and 16.7 wt.% were prepared with fixed C content at about 0.14 wt.%. Using these alloys, changes in microstructure, tensile property, and thermal fatigue property were investigated. Phase fraction of delta-ferrite was increased gradually with increasing Cr content. However, tensile strength, hardness, and thermal fatigue resistance appeared to be decreased. When the microstructure of delta-ferrite was observed, it was revealed that the mesh structure retained up to about 15% Cr content. Although thermal fatigue resistance was almost the same for Cr contents between 11.0 and 14.5 wt.%, it was significantly decreased at higher Cr contents. This was evident from mean value of crack lengths of 10 largest ones. Evaluation of thermal fatigue resistance on alloys with various Cr contents revealed the following important results. First, the reproducibility of ranking test was excellent regardless of the number of cycles. Second, thermal fatigue resistance was increased in proportion to true tensile fracture strength values of overlay materials. Finally, the number of thermal fatigue cracks per unit length was increased with increasing true tensile fracture strength.

• Fashion & Textile Research Journal
• /
• v.22 no.2
• /
• pp.181-191
• /
• 2020

The fashion industry has faced environmental, social, and ethical issues due to increased interest in ethical consumption. Numerous ethical studies have been conducted in the fashion industry. This study looked at the current state of research by year, academic journal, and detail in major related papers published in Scopus, KCI and KCI between 2009 and 2019. Ethical fashion studies began to appear in 2009 and were concentrated in certain academic journals and focused on fashion marketing and fashion design. Topics in ethical fashion were terms such as sustainable, eco-friendly, up-cycling, recycling, eco, zero-waist, and organic. In ethical fashion studies, environmental studies were conducted most often; in addition, the terms used along with ethical fashion tend to be frequently used for each particular major. Looking at key words used in research by period, the study showed that research was most diverse between 2016 and 2019. In particular, environmental and social issues of ethical fashion and convergence with animal protection, new distribution, science and technology sectors were newly added between 2016 and 2019. This study used text mining and network analysis to understand the overall trends of ethical fashion studies in Korea. In conclusion it is important to realize the relationship between the main words along with the current status analysis.

• Nuclear Engineering and Technology
• /
• v.40 no.7
• /
• pp.561-570
• /
• 2008

When reactivity insertion such as refueling occurs in CANDU reactors, the power and the water levels are tilted in the upper outer zone of the LZCS (Liquid Zone Control System) and fluctuate unstably for a certain period of time (1-5 days). The instability described above is observed in most CANDU reactors in service around the world, but its root cause is unidentified and no solutions to this problem have been established. Therefore, this study attempted to prove experimentally and analytically that the root cause lies in the hold-up of light water on the top of the TSP (Tube Support Plate) due to the mismatch between net volumetric flow rate of light water and helium crossing the narrowed porous TSP installed within the LZCS compartment. Our method was to perform a hydrodynamic simulation of in/outflow of light water and helium. Two solutions for the aforementioned instability of LZCS are suggested. One is to regulate the compartment for both inflowing helium gas and outflowing light water; the other is to enlarge the flow paths of helium and light water within TSP. The former may be applicable to nuclear reactors in service and the latter to those planned for construction.

• Korean Journal of Materials Research
• /
• v.27 no.1
• /
• pp.25-31
• /
• 2017

This study investigates changes in the mechanical behaviors, especially hardness and indentation load-displacement curves, of thermal barrier coatings (TBCs) brought about by thermal shock. The TBCs on the Nickel-based bondcoat/superalloy was prepared with diameters of 25.4 mm and $600{\mu}m$ thickness. The results of thermal shock cycling test from $1100^{\circ}C$ of the highest temperature indicate that the thermal shock do not influence on the mechanical behavior, but a continuous decrease in porosity and increase in hardness were observed after 1200 thermal shock cycles; these changes are believed to be due to sintering of thermal barrier coating materials. The results that no degradation in the indentation load-displacement curves indicate that the coating shows good thermal shock resistance up to 1200 cycles at $1100^{\circ}C$ in air.

• Nuclear Engineering and Technology
• /
• v.35 no.3
• /
• pp.179-190
• /
• 2003

The multiple steam generator tube rupture (SGTR) event scenario with available safety systems was experimentally and analytically evaluated. The experiment was conducted on the large scaled test facility to simulate the multiple SGTR event and investigate the effectiveness of operator actions. As a result, it indicated that the opening of pressurizer power operated relief valve was significantly effective in quickly terminating the primary-to-secondary break flow even for the 6.5 tubes rupture. In the analysis, the recent version of RELAP5 code was assessed with the test data. It indicated that the calculations agreed well with the measured data and that the plant responses such as the water level and relief valve cycling in the damaged steam generator were reasonably predicted. Finally, sensitivity study on the number of ruptured tubes up to 10 tubes was performed to investigate the coolant release into atmosphere. It indicated that the integrated steam mass released was not significantly varied with the number of ruptured tubes although the damaged steam generator was overfilled for more than 3 tubes rupture. These findings are expected to provide useful information in understanding and evaluating the plant ability to mitigate the consequence of multiple SGTR event.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.11 s.242
• /
• pp.1480-1487
• /
• 2005

Metal matrix composites(MMCs) have been rapidly becoming one of the strongest candidates for structural materials fur many high temperature application. However, among the various high temperature environments in which metal matrix composites was applied, thermal shock is known to cause significant degradation in most MMC system. Due to the appreciable difference in coefficient of thermal expansion(CTE) between reinforcement and metal matrix, internal stresses are generated following temperature changes. Infernal stresses affect degradation of mechanical properties of MMC by causing microscopic damage in interface and matrix during thermal cycling. Therefore, the nondestructive evaluation on thermal shock damage behavior of SiC/A16061 composite has been carried out using ultrasonics. For this study, SiC fiber reinforced metal matrix composite specimens fabricated by a squeeze casting technique were thermally cycled in the temperature range 298$\~$673 K up to 1000cyc1es. Three point bending test was conducted to investigate the efffct of thermal shock damage on mechanical properties. The relationship between thermal shock damage behavior and the propagation characteristics of surface wave and SH-ultrasonic wave was discussed by considering the result of SEM observation of fracture surface.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.2
• /
• pp.54-60
• /
• 2010

Piping failures due to thermal fatigue have been widely reported in normally stagnant non-isolable reactor coolant branch lines. Since the thermal fatigue due to thermal stratification was not considered in the piping fatigue design in old NPPs, it is important to evaluate the effect of thermal stratification on the integrity of branch lines. In this study, geometrical screening criteria for Up-horizontal branch lines in MRP-132 were applied to SI(Safety Injection) lines of KSNP 2-loop and WH 3-loop. Some computational fluid dynamic(CFD) analyses on the Reactor Coolant System(RCS) branch lines were also performed to develop the regulatory guidelines for screening criteria. As a result of applying MRP-132 screening criteria, KSNP 2-loop and WH 3-loop SI lines are determined to need further detailed evaluation. Results of CFD analyses show that both valve isolation and amount of leakage through valve can be used as technical bases for the screening criteria on the thermal fatigue analysis.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.1
• /
• pp.61-66
• /
• 2007

X-ray diffraction studies have been made to investigate the effects of binding of ADP, ADP+Vi, ADP+AIF4, $ADP+BeF_3$ on the structure of glycerinated rabbit skeletal muscle in the rigor state. Although these phosphate analogs are known to bind actively cycling myosin heads, it is not clear whether they can bind to the attached heads in the rigor muscle. We have found that these analogs can bind to the myosin heads attached to actin filaments in the rigor state. The present results indicate that (1) bound myosin heads altered their conformation in the proximal end toward the plane perpendicular to the fiber axis when MgADP bound to them, and (2) myosin heads were dissociated substantially (up to 50%) from actin filaments but still remained in the vicinity of actin filaments when MgADP and metallofluorides (AIF4 and BeF3) or vanadate bound to them. We detected new conformations of myosin heads attached to actin filaments when they had MgADP or ADP.Pi analogs. We report here these findings on the effects of MgADP and MgADP+phosphate analogs to the rigor crossbridges.

• Journal of International Academy of Physical Therapy Research
• /
• v.3 no.2
• /
• pp.453-457
• /
• 2012

The Goal of this study was to assess the effect of aerobic exercise on cognitive function of elderly people. The participants' cognitive functions were measured before exercise. Exercise was practiced three times a week for nine weeks. The aerobic exercises consisted of warm-up exercises for five minutes followed by cycling for 30 minutes. The exercise intensity was set to 65%~75% of the intensity for the maximum heart rate(220-age). The control group did not perform any exercises. The subjects' cognitive functions were measured nine weeks later. In the aerobic exercise group, between before and after the exercises, significant increases appeared in total K-MMSE scores and scores of some sub items comprising memory registration, concentration and calculation abilities but not in other items. In the control group, no significant differences appeared in any items between before and after the experiment. In a comparison between the aerobic exercise group and the control group, significant differences appeared in total K-MMSE scores and scores of two sub items comprising concentration and calculation abilities but not in other items(p<.05). Aerobic exercises were effective in the improvement of cognitive functions and among sub items of cognitive functions, concentration and calculating abilities were improved. Aerobic exercises performed by elderly persons are considered to be effective in improving cognitive functions.