• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2986-2988
• /
• 1999

This paper presents a new concept to implement and to control of tactile reproduction simulator by implementation of compliance emulator system. Compliance emulator system is a kind of levitation system using magnetic force. In the compliance emulator system, a floated plate moves vertically. When an external force is applied to the plate, the system produces a controlled reaction force by using 6 electromagnet. For the control, a LVDT displacement sensor and PD control method is used.

• Kyungpook Mathematical Journal
• /
• 제56권1호
• /
• pp.47-55
• /
• 2016

In this paper, we consider a discrete predator-prey system obtained from a continuous Beddington-DeAngelis type predator-prey system by using the method in [9]. In order to investigate dynamical behaviors of this discrete system, we find out all equilibrium points of the system and study their stability by using eigenvalues of a Jacobian matrix for each equilibrium points. In addition, we illustrate some numerical examples in order to substantiate theoretical results.

• Tribology and Lubricants
• /
• 제21권4호
• /
• pp.165-170
• /
• 2005

Engine lubrication system has very complex oil flow networks. Therefore it is difficult to evaluate and optimize the system only depending on experimental results. When we plan upgrading the engine performance the engine lubrication system must be considered in the plan. In this paper, engine lubrication system design using computational fluid dynamic analysis was studied. To do this, unsteady transient flow network analysis on the engine oil circuit system was carried out. Finally we discussed the design process in the modified engine lubrication system.

• Bulletin of the Korean Chemical Society
• /
• 제28권9호
• /
• pp.1489-1492
• /
• 2007

Belousov-Zhabotinsky (BZ) reaction containing oxalic acid and acetone as a mixed organic substrate catalyzed by Ce(IV) in a flow system has been investigated. The reaction system is analyzed by varying flow rate, inflow concentrations, and temperature. Interchangeable oscillating patterns are observed in a certain range of concentrations, and above or below the condition a steady state is obtained. The increase in temperature increases the frequency and decreases the amplitude of oscillations. The apparent activation energy for the system is calculated by using the Arrhenius equation, which means that temperature has a greater effect on the reaction. Bifurcation phase diagrams for the system show the region of oscillations or steady states along with a small region of multistability. Further the behavioral trend observed in this system is discussed by mechanistic character of the system.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2905-2908
• /
• 2009

Immuno-sensing for high accurate and selective sensing was performed by fluorescence spectroscopy and surface plasmon resonance (SPR), respectively. Engineered assembly of two fluorescent quantum dots (QDs) with bovine serum albumin (BSA) and anti-BSA was fabricated in PBS buffer for fluorescence analysis of fluorescence resonance energy transfer (FRET). Furthermore, the same bio-moieties were immobilized on Au plates for SPR analysis. Naturally-driven binding affinity of immuno-moieties induced FRET and plasmon resonance angle shift in the nanoscale sensing system. Interestingly, the sensing ranges were uniquely different in two systems: e.g., SPR spectroscopy was suitable for highly accurate analysis to measure in the range of 10$^{-15{\sim}-10$ng/mL while the QD fluorescent sensing system was relatively lower sensing ranges in 10$^{-10{\sim}-6$ng/mL. However, the QD sensing system was larger than the SPR sensing system in terms of sensing capacity per one specimen. It is, therefore, suggested that a mutual assistance of FRET and SPR combined sensing system would be a potentially promising candidate for high accuracy and reliable in situ sensing system of immune-related diseases.

• Journal of Information Display
• /
• 제12권1호
• /
• pp.37-41
• /
• 2011

Presented herein is a novel stereoscopic three-dimensional (3D) display system with active color filter glasses. This system provides full-color 3D images by applying the time-multiplexing technique on the original anaglyph method. By switching between the opposite anaglyph statuses, a full-color anaglyph is presented. A liquid crystal panel from a 3D monitor serves as an active color filter operating at 120 Hz. A display panel and a color filter are connected to one graphic card as a dual-link system, for synchronization. To test the quality of this system, a left/right-eye image separation test and an experiment with stereoscopic images were carried out. Although there was some crosstalk and blur, the system, as expected, provided full-color 3D display. This system overcomes a monochromatic 3D image, which is the major weakness of the original anaglyph system.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권6호
• /
• pp.514-518
• /
• 2004

Many methods are used in the measurement of antioxidative capacity. These meth­ods require very complex procedures and pretreatment. Our suggestions for research will be simple and accurate methods for obtaining many kinds of samples, especially colored samples such as natural product extracts for measuring antioxidative capacities. For oxidation-reduction potential (ORP) system value, we examined the relationships between the ORP-pH system and the ORAC, FRAP methods. To evaluate ORP System value, we calculated the absolute slope/intercept from the linear regression of each standard material at different concentrations and ORP-pH system, and compared the correlations with ORAC and FRAP values.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권3호
• /
• pp.18-22
• /
• 2015

This paper deals with high-Tc superconducting (HTS) power charging system with GdBCO magnet, photo-voltaic (PV) controller, and solar panels to charge solar energy. When combining the HTS magnet and the solar energy charging system, additional power source is not required therefore it is possible to obtain high power efficiency. Since there is no resistance in superconducting magnet carrying DC transport current the energy losses caused by joule heating can be reduced. In this paper, the charging characteristics of HTS power charging system was simulated by using PSIM. The charging current of HTS superconducting power charging system is measured and compared with the simulation results. Using the simulation of HTS power charging system, it can be applied to the solar energy applications.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 2010년도 춘계국제학술대회
• /
• pp.65-74
• /
• 2010

Most university has provided the information system that fit with their university peculiarity only, but there is not proper evaluation on the user satisfaction by that. In this study, first of all, it analysed which factors give satisfaction to the users when university operated the information systems and inquired the needed outcome variables in order to operate successful university information system. Through the inquisition of fitting supposition, we got something that organizational support and computer self efficacy which is personal factors were effected as an affirmative side to make a user satisfactions of information system. In more detail, organizational support and personal factors effected as an affirmative side to the quality of information system. And, so the quality of information system was influenced to user satisfaction that it raised the work result and increased the work products in organization through personal outcomes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1126-1127
• /
• 2008

A photovoltaic panel is a device that, through the photovoltaic effect, converts luminous energy into electric energy. Photovoltaic generation system used infinity of solar energy, cost of fuel is needless and there in no air pollution or waste occurrence. This paper summarizes the results of these efforts by offering a photovoltaic system structure in 30[kW] large scale applications installed in Mokpo National University dormitory roof. The status of photovoltaic system components, are inter-connection and safety equipment monitoring system will be summarized as this article. This describes configuration of utility interactive photovoltaic system which generated power supply for dormitory. In this paper represent 30[kW] utility photovoltaic system examination result.