• Journal of Biosystems Engineering
• /
• v.35 no.5
• /
• pp.294-301
• /
• 2010

This study was performed to improve the utilization of the ROPS and seatbelt of tractors in Korea. We surveyed the ROPS and seatbelt use and the tractor related accidents through the personal interviews for 141 farmers. And comfort test for tractor seatbelts is done for 4 different subjects by measuring the body pressure distribution. The survey showed that 79.3% of the tractor accidents was overturning accidents. And, in case the tractor has ROPS and seatbelt, there was no serious injuries. With this results, we could confirm that ROPS and seatbelt is very effective devices for protecting drivers in overturning accidents. But, in case farmers didn't wear seatbelt, there was some fatal injuries. This shows the importance of the seatbelt use in working and driving tractors. Therefore, we tested the comfort of the tractor seatbelt for 4 different subjects operating the pedal in tractor seat simulator and in the tractor running on various roads. From the results of the static test in the Lab, it was shown that more the seatbelt anchorage point is far form SIP point, more the body pressure of the belly became higher, and more the subjects feel uncomfortable. Not only in the static test in the simulator, but also in the dynamic test in riding tractors, it was shown that non retractable seatbelt was more uncomfortable than retractable seatbelt. According to this study, we concluded that we need to promote the utilization of the ROPS and seatbelt use. And, the non retractable seatbelt need to be replaced by retractable seatbelt. Also, we recommend that the seatbelt anchorage position should to be in the seatbelt anchorage area of the ISO 3776 standard.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.53-67
• /
• 2014

Numerical modeling is commonly used to reproduce the physical phenomena of dam-break and to compile resulting flood hazard maps. The accuracy of a dam-break model depends on the physical structure that describes the volume of storage, breach formation and progress, input variables, and model parameters. Model input and parameters are subjective in that they are prescribed; hence, caution is needed when interpreting the results. This study focuses on three parameters (breach degree ${\theta}$, shape factor P, and collapse rate k) used when the dam-break model is coupled with FLO-2D (a two-dimensional flood simulation model) to estimate flood coverage and depth etc. The results show that the simulation is sensitive to the shape factor P and the collapse rate k but not to the breach degree ${\theta}$. This study will contribute to reducing flood damage from dam-break disasters in the future.

• Journal of Internet Computing and Services
• /
• v.22 no.1
• /
• pp.31-39
• /
• 2021

Obtaining delivery addresses from calls is one of the most important processes in TV home shopping business. By automating this process, the operational efficiency of TV home shopping can be increased. In this paper, a method of recognizing and validating road name address, which is the address system of South Korea, from speech oriented text is proposed. The speech oriented text has three challenges. The first is that the numbers are represented in the form of pronunciation. The second is that the recorded address has noises that are made from repeated pronunciation of the same address, or unordered address. The third is that the readability of the resulted address. For resolving these problems, the proposed method enhances the existing address databases provided by the Korea Post and Ministry of the Interior and Safety. Various types of pronouncing address are added, and heuristic rules for dividing ambiguous pronunciations are employed. And the processed address is validated by checking the existence in the official address database. Even though, this proposed method is for the STT result of the address pronunciation, this also can be used for any 3^rd party services that need to validate road name address. The proposed method works robustly on noises such as positions change or omission of elements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.583-590
• /
• 2021

This paper is a study on the digitization of an analog 3D pen. The term digital implies features such as homeostasis, transformability, combinability, reproducibility, and convenience of storage. One device that produces a combination of these digital characteristics is a 3D printer, but its industrial use is limited due to low productivity and limitations with materials and physical characteristics. In particular, improvements are required to use 3D printers, such as better user accessibility owing to expertise and skills in modeling software and printers. Complementing this fact is the 3D pen, which is excellent in portability and ease of use, but has a limitation in that it cannot be digitized. Therefore, in order to secure a digitalization capability and ease of use, and to secure the safety of printing materials that pose controversial hazards during the printing process, research problems and alternatives have been derived by combining food, and digitization was demonstrated with a newly developed 3D pen. In order to digitize the 3D pen, a sensor in a structured device detects the motion of an analog 3D pen, and this motion is converted into 3D data (X-Y-Z coordinate values) through a spatial analysis algorithm. To prove this method, the similarity was confirmed by visualization using MeshLab version 1.3.4. It is expected that this food pen can be used in youth education and senior healthcare programs in the future.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.2
• /
• pp.99-111
• /
• 2021

The connected farm that agricultural land, agricultural machinery and farmer are connected with an IoT gateway is in the commercialization stage. That has increased productivity, efficiency and profitability by intimate information exchange among those. In order to develop the educational program of intelligent agricultural machinery and the agricultural machinery safety education performance indicator, this study analyzed patent trends of agricultural machine with unmanned technology used in agriculture and efficiency technology applied advanced technologies such as ICT, robots and artificial intelligence. We investigated and analyzed patent trends in agricultural machinery of Korea, the USA and Japan as well as the countries in Europe. The United States is an advanced country in the field of unmanned technology and efficiency technology used in agriculture. Agricultural automation technology in Korea is insufficient compared to developed countries, which means rapid technological development is needed. In the sub-fields of field automation technology, path generation and following technology and working machine control technology through environmental awareness have activated.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4777-4781
• /
• 2012

Objective: To investigate the relationship between the efficacy and safety of different doses of thalidomide (Thal) plus dexamethasone (Dex) as the initial therapy in elderly patients with newly diagnosed multiple myeloma (MM). Methods: Clinical data of 28 elderly patients with newly diagnosed MM who underwent the TD regimen as the initial therapy were analyzed retrospectively. The patients were divided into two groups according to the maximal sustained dose of Thal: lower dose (group A) and higher dose (group B). The overall response rate (ORR), progression free survival (PFS), overall survival (OS), and adverse events (AES) were compared between the two groups. Results: A total of 28 patients were followed up with a median of 18 months. The ORR was 60.1%. The median response time and PFS were 2.0 and 17.0 months, respectively. The mean sustained dose of Thal in group B was significantly higher than group A (292.9 mg v 180.4 mg, P=0.01). There was no significantly difference in ORR (57.1% v 64.3%, P=1.00) and PFS (9.63months v 17.66 months, P=0.73) between groups A and B. During the follow up, only five patients died (<40%) and, therefore, median OS values were not available. It is estimated, however, that the mean survival time in the two groups was 35.6 and 33.4 months (P>0.05), respectively. All of the patients tolerated the treatment well. The incidence of AES in patients with a grading above 3 in group B was significantly higher than in group A (P=0.033). Conclusions: The TD regimen results in a high response rate and manageable AES as the initial therapy in elderly patients with MM. TD should be considered as the front line regimen for the treatment of elderly patients with MM in areas with financial constraints. The clinical response can be achieved at a low dose Thal with minimal toxicity.

• The Journal of Society for e-Business Studies
• /
• v.21 no.2
• /
• pp.47-59
• /
• 2016

Parcel service is to deliver goods from one place to the designated destination requested according to user request. Parcel operations such as sorting, distributing, etc. or the managed information are heterogeneous by the companies. Additionally, it is impossible to support interoperability between companies with unformatted data of manual processing. Most parcel package boxes attached to paper typed waybill is attached is delivered to consignee. So, security problems such as personal information leaking are occurred, or extra processing time and logistics costs are needed due to wrong or the damaged information. Business environment of parcel service is rapidly changed as introducing unmanned delivery or the advanced technology such as Internet of Things. User want to know the accurate status or steps from parcel service request to delivery. To provide these requirements, the unified and integrated waybill information for reliable transportation of parcel service is needed. This information will provide to pickup or delivery carrier, warehouse or terminal, and parcel service user per pickup, transport, and delivery stage of parcel delivery service. Therefore, this paper defines the simplified and unified information model for parcel service waybill by analyzing information systems used for logistics unit processes that is occurred to parcel service, and manual work processes, and developing the relevant information of work flows occurred between business processes or transactions with the collected or processed information by from parcel service's stages. It is possible to share these standard model between business entities, and replacing paper typed waybill will improve national life safety as preventing security threats by paper typed waybill. As a result, it will promote the public interest from the stakeholder's perspective.

• Korean Journal of Veterinary Research
• /
• v.55 no.1
• /
• pp.9-12
• /
• 2015

Brachyspira (B.) hyodysenteriae is a causative agent of swine dysentery that is responsible for death and economic losses in the pig industry. It is imperative that clinical samples be delivered fresh for accurate diagnosis. The viability and DNA detection of B. hyodysenteriae using lab-made (phosphate buffered saline and modified tryptic soy broth) or commercial transport media (C, D, and E) were compared by culturing and real-time PCR at $4^{\circ}C$ or room temperature (RT), respectively. B. hyodysenteriae grown in D (Anaerobe Systems, USA) and E (Starplex Scientific, Canada) media was viable for 4 days at $4^{\circ}C$ and RT. However, B. hyodysenteriae in A, B, and C (culture swab; BD Biosciences, USA) media were not recovered after 2 days at RT. Ct values for real-time PCR at $4^{\circ}C$ and RT ranged from $27.2{\pm}2.1$ (C) to $29.6{\pm}0.5$ (B), and $28.0{\pm}0.9$ (E) to $30.2{\pm}1.5$ (B), respectively. Considering the field conditions, it is important that transport media is used for specimen isolation and PCR to obtain an accurate diagnosis of swine dysentery.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.2
• /
• pp.137-142
• /
• 2011

This study was conducted to establish the optimal electrolyte and bismuth concentrations using bismuth film electrode in laboratory and to confirm the possibilities of using this operational condition for heavy metals monitoring in field. In lab test, heavy metal measurement was not accurate more than 600 ppb when heavy metal (Pb, Cd, Zn) range 100~1,000 ppb was measured with bismuth 2,000 ppb. So, bismuth and heavy metal was reacted about 1:1 with ASV method. In electrolyte test, 0.1 M acetate buffer (pH 4.5), 0.1 M chloroacetate buffer (pH 2.0), 0.1 M HCl (pH 2.0), 0.1 M $HNO_3$ (pH 2.0) was tested. As a results, 0.1 M acetate buffer was most suitable in ASV measurement with bismuth film electrode. In field application, Pb, Cd and Zn was measured respectively 36~45 ppb, 84~91 ppb, 90~98 ppb when heavy metal (Pb, Cd, Zn) 100 ppb was spiked in field sample. These results were identified of matrix effect in field sample, So relationship between heavy metal measurement and matrix effects will be studied.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.271-305
• /
• 2020

An effect of coupled thermo-hydro-mechanical and chemical (THMC) behavior is an essential part of the performance and safety assessment of geological disposal systems for high-level radioactive waste and spent nuclear fuel. Furthermore, numerical models and modeling techniques are necessary to analyze and predict the coupled THMC behavior in the disposal systems. However, phenomena associated with the coupled THMC behavior are nonlinear, and the constitutive relationships between them are not well known. Therefore, it is challenging to develop numerical models and modeling techniques to analyze and predict the coupled THMC behavior in the geological disposal systems. It is also difficult to verify and validate the development of the models and techniques because it requires expensive laboratory tests and in-situ experiments that need to be performed for a long time. DECOVALEX was initiated in 1992 to efficiently develop numerical models and modeling techniques and validate the developed models and techniques against the lab and in-situ experiments. In Korea, Korea Atomic Energy Research Institute has participated in DECOVALEX-2011, DECOVALEX-2015, and DECOVALEX-2019 since 2008. In this study, all tasks in the three DECOVALEX projects were introduced to the researcher in the field of rock mechanics and geotechnical engineering in Korea.