• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.199-203
• /
• 2011

With the improvement of standard of manufacturing process, oil cooling unit for manufacturing machine has been developed. A control system must be designed in order to keep oil temperature of the machine within a very restricted range and also to reduce energy consumption. In order to get the low deviation of the controlled temperature and the low efficiency, the on/off control scheme is gradually being replaced by a variable speed refrigeration system (VSRS) with an inverter driven compressor over recent decades. This paper gives the flowchart to control the compressor speed and also the electronic expansion valve (EEV) aperture in oil cooling unit refrigeration system using R22 as the refrigerant. This control scheme has already tested in experiment apparatus with room temperature condition constant at $25^{\circ}C$ and variable load condition at 4kW, 6kW, 7kW, 8kW and 10kW.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1282-1285
• /
• 2004

The high voltage driving system with multi-phase shifter including piezoelectric actuators comprised a driving power unit for outputting the driving power by converting input alternate current into direct current, a frequency shifting unit for supplying the direct current power and shifting or generating a frequency, a high-voltage amplification unit for amplifying the input signal outputted from the driving power unit and the frequency shifting unit into a high-voltage signal, and a phase shifting unit for shifting the phase difference of the amplified signal applied to the high-voltage amplification unit and driving plural piezoelectric actuators sequentially. The results that the operating voltage was stable, the voltage loss ratio was low and the response velocity was fast could be obtained. An experiment on performance of the high voltage driving system with multi-phase shifter designed and manufactured as above described was conducted by using a piezoelectric pump having 3 sheets of round unimorph piezoelectric actuators laminated respectively in a rectangular case. It sucks any fluid by causing the first piezoelectric actuator to shift from the inlet porter side, the phase delay of 60$^{\circ}$ causes the second piezoelectric actuator to begin to shift, and the phase delay of 120$^{\circ}$ causes the third piezoelectric actuator to begin to shift. As a result of measuring each change in the outlet flow rate of the piezoelectric pump, it was shown that the frequency-flow rate characteristic, the voltage-flow characteristic, and the load pressure-flow rate characteristic were improved.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.147-154
• /
• 2008

A simulation program is developed for the optimal design of small scale district heating and cooling system. Main features for the simulation program are the reliability and the easiness for the optimal design of the DHC(District Heating and Cooling) systems. In order for implementing those features, the operational characteristics according to the prime movers is modeled based on the materials of efficiency as a function of operational load. The unit energy load model is also developed extensively for several building types, of which the corresponding district consist, such as apartment complex, hotel, hospital, buildings for business and commercial use respectively. The specific features and the overall procedure of the simulation are described in brief in this paper. The results of the simulation for several test cases will be presented in subsequent study.

• 항공우주시스템공학회지
• /
• 제13권5호
• /
• pp.57-64
• /
• 2019

항공전자 시스템은 유지비용 감소 및 운용성능 향상을 위하여 기능을 모듈화, 통합화 설계를 적용한 모듈 통합형 항공 전자 시스템으로 개발 되어지고 있으며, 다양한 임무 제어 수행을 위해서 가상화 기술을 적용한 파티셔닝 운용체제를 적용 하고 있다. 가상화 기술을 적용 할 경우 CPU 처리 부하 분배는 중요한 고려 대상이며, 특히 입출력 처리 시간에 대한 불확실성은 안정성 있는 항공전자 시스템 설계에 있어 위험 요소 중 하나이다. 본 논문에서는 유즈케이스를 통해 입/출력 처리 방식에 따르는 CPU 처리 부하량을 비교 분석하여 공간적/시간적 파티셔닝 예시에 적용함으로써 입/출력 처리 방식의 영향성을 검토하고자 한다.

• 한국공간정보시스템학회 논문지
• /
• 제6권1호
• /
• pp.51-58
• /
• 2004

모바일 매핑시스템은 차량에 GPS(Global Positioning System), IMU(Inertial Measurement Unit), CCD 카메라 등을 탑재하고 위치 및 영상 정보를 취득하는 효율적인 방법이다. 모바일 매핑시스템은 도로 시설물 관리, 지도 갱신 등 다양한 분야에 이용되고 있다. 국외에서 개발된 모바일 매핑시스템은 각 센서의 통합 및 동기화 방안을 알 수 없으므로 업그레이드하거나 새로운 센서를 추가하기 어렵다. 본 연구에서는 모바일 매핑시스템의 개선 및 센서추가를 위해서 모바일 매핑시스템에 기본석으로 필요한 GPS, IMU, 그리고 CCD 카메라와 향후 추가될 센서인 레이저, 오도미터(Odometer) 등의 센서가 추가될 경우를 고려하여 멀티 센서 통합 및 동기화 구현 방안을 제시하였다. 또한 동기화에 필요한 각 센1서의 요구사항을 파악한 후 동기화 장비를 설계 및 제작하고 실험하였다.

• 조명전기설비학회논문지
• /
• 제25권2호
• /
• pp.61-68
• /
• 2011

The circuit breaker of power distribution board is essential part for the protection of electrical disaster from load short, trouble of power system. For the normal operation of circuit breaker, trip coil of the circuit breaker can cut the mechanical contact of circuit breaker from the detection of power system troubles. This paper presents a design and experimental results of trip coil fault detection system for the real time monitoring of the circuit breaker. The designed system is consisted by the trip coil fault detector which is connected to the each circuit breaker and remote monitoring unit. The trip coil fault detector can detect the impedance and operating voltage of the trip coil, and the detected values are compared with the normal state. And the remote monitoring unit can be connected to the 32 channels of trip coil fault detectors by serial communication. From the designed system, the fault and normal states of the trip coil can be remotely monitored in real time. The designed system is verified by the practical circuit breaker of power distribution board. And the results shows the effectiveness of the designed system.

• 한국태양에너지학회 논문집
• /
• 제30권4호
• /
• pp.22-28
• /
• 2010

This study analyzed the performance of passive solar system for office building. A unit model of the passive solar system was proposed in order to predict its performance under varying parameters and Seoul weather date. Steady state heat transfer equations were set up using a energy balanced equations and solved using a inverse matrix method. Numerical simulation program to analyze system was developed by using MATLAB. As the results, the passive solar system performance of office building was determined by the insolation and the outdoor air temperature. Also the passive solar system indicate 6.7~16.2% of annual average efficiency. In the comparison with other systems of the conventional wall, mass wall could reduce the heating loads of 7.1% and trombe wall could reduce heating loads of 11.5%. Through this study, performance of passive solar system for office building was verified by numerical method. Consequently, the passive solar system could operate an important role as the alternative for saving energy consumption of office building, and the additional studies should be made through the experimental method for the commercialization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.877-880
• /
• 1991

In this paper, the architecture of a dataflow logic solving processor for programmable logic controller is proposed. As the proposed DFLSP(dataflow logic solving processor) is designed based on the dataflow architecture, it has inherently concurrent processing and data synchronization capabilities. And also, it has dynamic load balancing capabilites which increases the utilization of the whole system that can he hardly implemented in other multiprocessor system. The re-matching unit gets rid of unnecessary matching cycles in LSU, which increases the performance of LSU and allows the multiple input multiple output operations.

• 한국실내디자인학회논문집
• /
• 제14호
• /
• pp.27-32
• /
• 1998

Present structure design has a problem arising from the fact that present apartment housing design doesn't satisfy user's diverse demand. An aim of this study on searching out the alternative to solve this problem. The results of study are as follows : 1) Methods of flexible structure are analyzed to reflect user's needs and practical example of those proposed. 2) To raise the flexibility of design reinforced concrete pannel wall system are selected. The basic types of T and II for the figures of pannel are adopted. As a result it brought so much open space not having influenced on the load of construction that it enhances the flexibility of the space allocation. Also that made it easy to meet the user's demand for 8 kinds of plan types are easily designed according to the arrangement of the space and its scale. These results will become basic data of future unit plan design in apartment housing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1114-1116
• /
• 1999

This paper presents a new algorithm which evaluates production cost and reliability indices under various constraints of the thermal generation system. In order to consider the operational constraints of thermal units effectively, the proposed algorithm is based on Monte Carlo techniques instead of analytical ones which have difficulty in modelling the units with additional constraints. At that point, generating units are modelled into two types, base load units and peaking units. These generating unit models are used in state duration sampling simulation for which approach can readily consider the peaking unit operating cycles and easily calculates frequency-duration indices. The proposed production simulation algorithm is applied to the IEEE Reliability Test System, and performs the production simulation under the given constraints. The results show that the proposed algorithm is accurate, reliable and useful.