• 재무관리연구
• /
• 제22권2호
• /
• pp.71-89
• /
• 2005

본 연구는 SFA 방법을 이용하여 2001년도 우리나라 7개 대도시 194개의 신용협동조합에 대한 효율성을 측정하였다. 필요한 투입요소들을 선택하기 위하여, 반응변수는 총비용을 설명변수는 산출물과 투입물을 고려하였다. 이때, 산출물로는 대출채권과 상품유가증권, 투자유가증권의 합으로 정의되는 유가증권을 고려하였으며, 투입물로는 단위당 투입가격을 고려하기 위해서 직원수 1인당 인건비(인건비/직원수), 예금 1단위당 예금이자(예금이자/예금), 유형자산 1 단위당 판관비(판관비/유형자산)를 고려하였다. 전체 신용협동조합의 효율성 분석결과 50%의 신용협동조합들이 가장 효율적인 신용협동조합보다 약 17% 이상 비효율적인 것으로 나타났고, 상위25%의 신용협동조합들이 가장 효율적인 신용협동조합보다 약 9% 이하로 비효율적인 것으로 나타났다. 지역과 자산규모에 따라서 신용협동조합별로 효율성의 차이가 있었는데, 서울과 대구에서는 규모간 효율성의 차이가 없었지만 나머지 지역들에서는 중규모 신용협동조합의 효율성이 대규모 신용협동조합의 효율성보다 큰 것으로 나타났다.

• 보존과학회지
• /
• 제25권2호
• /
• pp.219-231
• /
• 2009

본 연구는 대전에서 출토된 조선시대 초중기의 여산송씨가 출토복식을 보존처리함에 있어 출토복식의 세척처리 현황을 조사하고 본 출토복식의 세척과정을 보고하여 앞으로 출토복식의 세척방안에 대한 자료로 제공하고자 하는데 그 목적이 있다. 여산송씨 출토복식은 15세기의 남자복식과 16세기중후반의 남녀복식을 비교할 수 있는 좋은 자료가 되고 있다. 출토유물은 모두 184점이 출토되었으며 면, 견, 마, 교직물 등 다양한 직물이 있었다. 여산송씨 출토복식의 세척은 직물의 상태와 오염을 분석한 후 진공흡입에 의한 고형오염을 충분히 제거하고 습식세척과 건식세척방법을 시행하였으며 1, 2차로 진행되었다. 습식세척의 경우 음이온계 계면활성제(LAS)와 비이온계 계면활성제(Triton X-100)를 사용하였고 건식세척의 경우 n-hexane과 n-decane(4:6) 혼합용제 및 석유계 드라이클리닝용제를 사용하였다. 1차 세척 후 빠지지 않은 얼룩이 있는 면직물이나 마직물의 경우 표백처리를 실시하였으며 견직물 중 상태가 좋은 것은 유기용제에 의한 건식세척을 재실시하였다.

• 대한토목학회논문집
• /
• 제38권2호
• /
• pp.337-347
• /
• 2018

정부는 노후불량주거지에 대한 개선책으로 "도시 및 주거환경정비법"을 통한 주거지정비사업을 시행하고 있다. 하지만, 최근 경제성장 하락을 포함한 다양한 요소가 복합적으로 작용하여 정비사업 추진은 난항을 겪고 있다. 정비사업의 추진실적이 저조함에 따라, 그 원인을 규명하여 사업의 추진성을 향상시키고자 다양한 연구가 진행되어 왔다. 이러한 연구의 동향에서, 본 연구는 부산시를 대상으로 토지 및 건축물특성에 따른 정비사업 추진 분석을 진행하였다. 분석 간 종속변수는 "도시 및 주거환경정비법"에서 명시하는 바와 같이, 추진단계를 종합적 단계적으로 구성하였다. 그리고 정비(예정)구역 지정 시 기준이 되는 토지 및 건축물특성을 독립변수로 설정하였다. 순서형로짓모형을 통해 이를 분석하였으며, 지형적 여건, 조합원 수와 관련된 요인, 분양가에 영향을 미치는 요인, 입지적 여건이 사업 추진에 유의미한 영향을 미치는 것으로 추정되었다. 분석결과를 종합하면, 다수의 요인이 사업의 경제성과 연관되어있음을 알 수 있다. 노후불량주거지에 대한 도시계획사업의 일환으로 진행되는 주거지정비사업은 공공성이 요구되는 사업인 만큼, 단순 사업의 경제성과 연관된 요인에 편중되기보다 해당 정비구역의 주거환경을 고려하여 정비 시급성에 의한 사업추진이 필요해 보인다. 이에 따라, 신속하고 합리적인 사업 추진을 당부하는 바이며, 사업추진 지연에 따른 행정적 경제적 손실 등을 미연에 방지해야 할 것이다.

• 대한지리학회지
• /
• 제38권4호
• /
• pp.575-590
• /
• 2003

연산과 회덕 지방에 있어서 16~17세기의 시기는 경판 생산과 사회적 관계망 확장단계(landscape phase)로 대변된다. 그 만큼 사회적으로 의도된 다양한 상징경관이 생산되던 시기로서, 혈연관계를 중심 매개로 했던 이전의 생태적 정착 단계와는 다른 지역 정체성을 구성해갔다. 15세기를 지나면서 이들 지역에서 수위 종족집단으로 부상한 광산김씨와 은진송씨는 "권력 과시형 경관"을 지역에 이식하면서 중앙에서 획득한 자신들의 권력을 지방에 과시하였고, 16세기부터는 지방민들을 포섭하기 위한 '시혜$.$교화형 경관"을 생산하면서 지역사회에 완전히 착근할 수 있었다. 광산김씨의 경우 후자에 해당하는 첫 번째 경관이 정회당이었고, 다음으로 양성당, 임리정이 생산되었다. 이러한 경관 창출은 순차적인 영역성 확대를 유도하였고, 영역성에 내포된 초기의 (pseudo-spatial) 성격은 보다 분명한 공간적 정초를 확립하면서 내실을 기해갔다. 이러한 경관 생산을 통해서 학문적 계보의식이 탄생하였고 그 계보의식은 일정한 지역적 범위를 향해서 확대, 심화될 수 있었다. 또 한가지 이 시기의 중요한 특징은 '시혜$.$교화형 경관'이 매개가 되어 연산의 광산 김씨와 회덕의 은진송씨가 사회$.$공간적으로 결합될 수 있었다는 점이다. 이들의 사회적 결합은 곧 공간적 영역의 통합을 의미하는 것이었다. '국지적'(local)규모의 수위 종족집단이 서로 결합함으로써 '지역적(regional)규모의 지역사회가 형성되었음을 말한다. 이와 같은 연산과 회덕의 공간적 통합과 확장된 영역성은 광산김씨와 은진송씨가 주체가 된 지역화과정의 산물이었다. 사회적으로 생산된 이 공간성(spatiality)의 탄생과정에는 학연 관계가 중요한 요인으로 작용하고 있지만, 통혼을 통한 혈연관계, 근거지의 지리적 인접성이라는 지연 관계가 복합적으로 작용하면서 연산$.$회덕권을 하나의 동일한 지역사회(community)로 만들어낸 것이다. 이렇게 출현한 공간적 영역과 지역 정체성은 오늘날가지 이 지방의 사회$.$공간적 의미를 구성하면서 중요한 층위로 존속하고 있다.

• Journal of Animal Science and Technology
• /
• 제59권8호
• /
• pp.18.1-18.8
• /
• 2017

Background: In 2006, the European Union (EU) has decided to forbid use of antibiotics as growth promoters. Although many researches had been conducted about fiber source as alternatives of antibiotics, there are still lack of reports in the literature about the optimum level of sugar beet pulp supplementation, affecting growth performance and nutrient digestibility in weaning pigs. Therefore, different level of sugar beet pulp was added to diets to determine the effects of sugar beet pulp supplementation on growth performance, nutrient digestibility, fecal microflora, blood profile and incidence of diarrhea in weaning pigs. Methods: A total of 200 weaning pigs [$(Yorkshire{\times}Landrace){\times}Duroc$], averaging $9.01{\pm}1.389kg$ of initial body weight were, allotted to 5 treatments in a randomized complete block (RCB) design. Each treatment was composed of 4 replicates with 10 pigs per pen. The treatments were control treatment: Corn-SBM basal diet + ZnO (phase 1: 0.05%; phase 2; 0.03%) and four different levels of sugar beet pulp were supplemented in Corn-SBM basal diet (3, 6, 9 or 12%). Two phase feeding programs (phase 1: 1-2 weeks; phase 2: 3-5 weeks) were used for 5 week of growth trial. Results: In feeding trial, there were no significant differences in growth performance and incidence of diarrhea among treatments. The E.coli counts were not significantly different among dietary treatments but linear response was observed in Lactobacillus counts as sugar beet pulp supplementation increased (P < 0.05). In addition, IGF-1, IgA and IgG were not affected by dietary treatments. However, the BUN concentration was decreased when pigs were fed the treatments of diets with SBP compared to that of control treatment (P < 0.05). In nutrient digestibility, crude fiber and NDF digestibilities were improved as the sugar beet pulp increased (P < 0.05). However, digestibilities of crude ash, crude fat, crude fiber and nitrogen retention were not affected by dietary sugar beet pulp levels. Conclusion: This experiment demonstrated that sugar beet pulp can be supplemented in weaning pigs' diet instead of ZnO to prevent postweaning diarrhea without any detrimental effect on growth performance.

• 무역상무연구
• /
• 제63권
• /
• pp.159-184
• /
• 2014

Climate change is one of the biggest dangers facing all living creatures in the earth. It has been understood that emissions of greenhouse gases from human activity is the cause of climate change. Cars are responsible for around 12% of total EU emissions of CO2, the main greenhouse gas. The United Nations Framework Convention on Climate Change (UNFCCC or FCCC) is an international environmental treaty adopted at the United Nations Conference on Environment and Development (UNCED) on 9 May, 1992, which entered into force on 21 March 1994. The European Commission first adopted a Community Strategy to reduce CO2 emissions from cars in 1995. On 19 December 2007, the European Commission proposed "Proposal for Setting emission performance standards for new passenger cars to reduce CO2 emissions", which was adopted on 23 April 2009 as "Regulation (EC) No 443/2009". Prior to submitting the Proposal, the European Commission performed impact assessment and prepared impact assessment report which was reviewed by the Impact Assessment Board. The objective of this Regulation is to set emission performance standards for new passenger cars registered in the Community, which forms part of the Community's integrated approach to reducing CO2 emissions from light-duty vehicles while ensuring the proper functioning of the internal market. In the event that a manufacturer fails to meet its target, it will be required to pay an excess emissions premium in respect of each calendar year from 2012 onwards. On 11 March 2014, Regulation (EC) No 333/2014 amending Regulation (EC) No 443/2009 was adopted. Regulation (EC) No 333/2014 amends Regulation (EC) No 443/2009 to implement the modalities of meeting the 95g CO2/km target for new passenger cars to be reached in 2020. As industry benefits from indications of the regulatory regime that would apply beyond 2020, the Regulation includes a further review to take place by, at the latest, 31 December 2014.

• 대한족부족관절학회지
• /
• 제15권2호
• /
• pp.51-57
• /
• 2011

Pilon fractures involving distal tibia remain one of the most difficult therapeutic challenges that confront the orthopedic surgeons because of associated soft tissue injury is common. To introduce and describe the diagnosis, current treatment, results and complications of the pilon fractures. In initial assessment, the correct evaluation of the fracture type through radiographic checkup and examination of the soft tissue envelope is needed to decide appropriate treatment planning of pilon fractures. Even though Ruedi and Allgower reported 74% good and excellent results with primary open reduction and internal fixation, recently the second staged treatment of pilon fractures is preferred to orthopedic traumatologist because of the soft tissue problem is common after primary open reduction and internal fixation. The components of the first stage are focused primarily on stabilization of the soft tissue envelope. If fibula is fractured, fibular open reduction and internal fixation is integral part of initial management for reducing the majority of tibial deformities. Ankle-spanning temporary external fixator is used to restore limb alignment and displaced intraarticular fragments through ligamentotaxis and distraction. And the second stage, definitive open reduction and internal fixation of the tibial component, is undertaken when the soft tissue injury has resolved and no infection sign is seen on pin site of external fixator. The goals of definitive internal fixation should include absolute stability and interfragmentary compression of reduced articular segments, stable fixation of the articular segment to the tibial diaphysis, and restoration of coronal, transverse, and sagittal plane alignments. The location, rigidity, and kinds of the implants are based on each individual fractures. The conventional plate fixation has more advantages in anatomical reduction of intraarticular fractures than locking compression plate. But it has more complications as infection, delayed union and nonunion. The locking compression plate fixation provides greater stability and lesser wound problem than conventional implants. But the locking compression plate remains poorly defined for intraarticular fractures of the distal tibia. Active, active assisted, passive range of motion of the ankle is recommended when postoperative rehabilitation is started. Splinting with the foot in neutral is continued until suture is removed at the 2~3 weeks and weight bearing is delayed for approximately 12 weeks. The recognition of the soft tissue injury has evolved as a critical component of the management of pilon fractures. At this point, the second staged treatment of pilon fractures is good treatment option because of it is designed to promote recovery of the soft tissue envelope in first stage operation and get a good result in definitive reduction and stabilization of the articular surface and axial alignment in second stage operation.

• 대한족부족관절학회지
• /
• 제15권4호
• /
• pp.201-206
• /
• 2011

Purpose: Subtalar distraction arthrodesis is useful treatment option for restore hindfoot alignment. but, using structural autograft have high risk of donor site morbidity. Recently, by replacing the structural allograft has been reported satisfactory clinical results. Therefore, the authors reviewed the results of subtalar distraction arthrodesis using a structural allograft, retrospectively. Materials and Methods: From January 2008 to May 2010, 12 patients (12 feets; 9 male, 3 female) underwent subtalar distraction arthrodesis using frozen structural allograft. 9 cases were calcaneal malunion, 2 were nonunion or malunion after subtalar arthrodesis, 1 was other cause. Mean age was 38.9 (12~66) years old and follow up period was 16.5 (12~36) months. Surgical was performed with posterolateral approach and tricortical allobone block of frozen femoral neck was used. Analysis was done with retorspective manner to evaluate preoperative, postoperative, and final follow up radiologic measurement and AOFAS ankle-hindfoot scale. Results: There was statistically significant increase (p<0.05) of ankle-hindfoot scale from preoperative 27.5 points to postoperative 72.5 points, talocalcaneal height by 6.62 mm, calcaneal pitch angle by 5.73 degrees, lateral talocalcaneal angle by 6.38 degrees and significant decrease (p<0.05) of tali-1st metatarsal angle by 5.23 degrees. 11 feet (91.7%) acquired bony union and it takes average 5.1 months. Final post-operative result revealed talocalcaneal height changed by 2.57 mm, calcaneal pitch anble, lateral talocalcaneal angle, talar-1st metatarsal angle were changed by 2.63 degrees, 1.62 degrees, 1.18 degrees, respectively (p<0.05). 3 cases of partial osteonecrosis of posterior facet of calcaneus were observed in operation field, 4 cases of complication were developed (1 case of nonunion, 1 collapse of allobone graft, 1 screw loosening, 1 superficial skin necrosis). Conclusion: Subtalar distraction arthrodesis using frozen structural allobone graft is useful alternative treatment method of arthrodesis with structural autobone graft.

• 대한족부족관절학회지
• /
• 제14권1호
• /
• pp.25-30
• /
• 2010

Purpose: The purpose of this study was to evaluate the clinical and radiological outcomes of the S.E.R.I. (simple, effective, rapid, inexpensive) operation for the bunionette deformity. Materials and Methods: Between March 2005 and February 2009, 22 patients (26 feet) who had been treated for the bunionette deformity with minimally invasive osteotomy were reviewed retrospectively. Clinically, Visual Analogue Scale (VAS), American Orthopaedic Foot and Ankle Society (AOFAS) score, shoes selectivity, disappearance of callus and patient's satisfaction level by Coughlin scoring system were evaluated. Radiologically, the bunionette was classified as four types according to the Fallat classification. The 4-5$^{th}$ intermetatarsal angle (4-5$^{th}$ IMA), the 5$^{th}$ metatarsophalangeal angle (5$^{th}$ MPA) and the length of 5th metatarsal bone (5$^{th}$ MTL) were analyzed at preoperatively and at final follow up visit. Results: VAS improved from $6.8{\pm}1.8$ points to $2.2{\pm}1.8$ points (p<0.05). AOFAS score improved from $54.0{\pm}14.2$ points to $90.0{\pm}4.8$ points (p<0.05). There was no change in shoes selectivity. 9 feet (34.6%) were satisfied with excellent results, 16 feet (61.5%) with good results and 1 foot (3.9%) with fair results. The average 4-5$^{th}$ IMA was corrected from $10.1{\pm}2.3^{\circ}$ to $4.4{\pm}1.7^{\circ}$ (p<0.05). The average 5$^{th}$ MPA was corrected from $11.5{\pm}8.6^{\circ}$ to $-0.1{\pm}4.1^{\circ}$ (p<0.05). The average 5$^{th}$ MTL was changed from $66.1{\pm}4.3$ millimeters to $64.1{\pm}4.4$ millimeters (p=0.069). There was no malunion, nonunion or delayed union and other perioperative complications. Conclusion: S.E.R.I. operation is less invasive and easy technique. This procedure is recommendable for the treatment of the bunionette deformity.

• 환경영향평가
• /
• 제14권5호
• /
• pp.347-353
• /
• 2005

The risk assessment is the qualitative or quantitative evaluation of the risk posed to human health and the environment by the actual or potential presence or release of hazardous substances, pollutants or contaminants. The environmental impact assessment (EIA) is assessed by the environmental criteria, and risk assessment is assessed by the risk rate. Risk rate based on dose-response values may not be easy to apply on regulatory basis like EIA for uncertainty. Internationally there is an example of OECD program. Risk assessment of High Production Volume (HPV) Chemicals has started since the OECD Program with the 1990 Council Act on the Co-operative Investigation and Risk Reduction of Existing Chemicals. These HPV chemicals include all chemicals produced or imported at levels greater than 1,000 tonnes per year in at least one Member country or in the European Union region. The SIDS called the Screening Information Data Set is regarded as the minimum information needed to assess an HPV chemical to determine whether any further work should be carried out or not. All the data elements of SIDS including assessment for environment and health are prepared as three formats of the full SIDS Dossier, the SIDS Initial Assessment Report (SIAR), and the SIDS Initial Assessment Profile (SIAP) of an HPV chemical. In 1998 the global chemical industry through the International Council of Chemical Associations (ICCA) has joined to work with OECD. The OECD has assessed approximately 1,000 chemicals from 1991 through 2004 with ICCA. Till the February of 2005, 592 chemicals of those chemicals completed SIDS reports. Member countries have been targeted the goal of 1,000 new chemicals from 2005 to 2010 and Korea shared 36 chemicals from the 1,000 new chemicals. Currently Korea has completed SIDS reports of 7 chemicals among sponsored 24 chemicals. In conclusion SIDS project will be linked to national program for outputs application with more reliable production. Both the OECD and industry will carry out their commitment to complete assessments for more and the remaining chemicals assessment. The major outputs will contribute to cope with international chemical management.