• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.71-92
• /
• 1999

This study is to analyze the stress and displacement on the jaws during the bilateral and unilateral clenching task on three dimensional finite element model of the dentated skull. For this study, the computed tomography(G.E.8800 Quick, USA) was used to scan the total length of human skull in the frontal plane at 1.9mm intervals. The CAD data were extracted from the tomograms through digitizer(Summa Sketch III, USA) and then reconstructed by means of the spline method in the CAD program. In this project, a commercial software I-DEAS(Master Series ver-sion 3.0, SDRC Inc, USA) was used for three-dimensional stress analysis on the finite element model. which consists of articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. The results are as follows. ; 1. During the bilateral clenching, each major muscle forces caused high stresses on various areas of skull: masseter muscle on articular disc and teeth ; temporal muscle on mandible and periodontal ligament ; medial pterygoid muscle on the temporomandibular joint. During the unilateral clenching, masseter muscle induced the maximum stress ; medial pterygoid muscle the minimum stress. 2. During the bilateral clenching, higher compressive stresses on articular disc were generated by the masseter muscle and higher deformation occurred on the most front outer sites. And during the unilateral clenching, temporal muscle and medial pterygoid muscle exerted their forces to twist temporomandibular joint area of the balancing side and induced a higher compressive stresses on the front outer sites of articular disc. 3. During the bilateral clenching, the masseter muscle bended the mandible outwardly, and then caused tensile stresses on the lingual surface of mandibular symphysis. And the medial pterygoid muscle caused tensile stresses on the labial surface of mandibular symphysis. 4. When each muscles were simultaneously applied on jaws, a high stress and displacement took place on mandible rather than on the maxilla. Also, a high stress and displacement took place during the unilateral clenching rather than during the bilateral clenching.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.2
• /
• pp.175-182
• /
• 1990

This study was performed to investigate the influence of occlusal change on the masticatory muscle activity. 8 students without any symptom of T.M.J. dysfunction, any history of prosthodontic or orthodontic treatment on dental college of WonKwang Univ. were participated in this study. The activity of masseter and anterior temporal muscles were measured by bioelectric processor(EM2, Myotronics, Inc., U.S.A.) during voluntary maximal clenching on natural teeth, by splint with bilateral posterior surface contact, by splint with unilateral posterior surface contact, and by splint without unilateral posterior teeth contact. The obtained results were as follows ; 1. The loss of posterior contact on noe side resulted in change of the activity of anterior temporal and masseter muscle during clenching on ipsilateral side, but there was no change of muscle activity on contralateral side. 2. The activity of anterior temporal and masseter muscle during clenching were not affected by the pattern of occlusal contact. 3. There were no difference between the activity of anterior temporal and masseter miuscle during clenching by natural teeth and by occlusal splint.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.3
• /
• pp.517-534
• /
• 1997

It has been held that excessive mechanical forces to the osseous and soft tissues of the TMJ result in joint dysfunction. Understanding the stress pattern on TMJ is very important in TMJ research. But, it is very difficult to measure directly the biomechanical stress distribution in the TMJ when the mandible is loaded. Therefore, stress distribution in the TMJ during functional movement was studied through animal experiment or mathematical model. It was observed and compared the stress distribution occuring in the working and balancing condyle when lower right canine, lower right first molar and lower right second molar were clenched by the three dimensional finite element analysis. Also, stress distribution in the working and balancing condyles were observed and compared when $20^{\circ}$ forward and buccal bite forces were applied to the first molar. The results were as follows : 1. Stress distribution in the condyles during unilateral clenching of the first molar, second molar, canine showed no difference. In the working condyle, tensile force was concentrated on the lateral aspect of the condylar articular surface and condylar neck. And compressive force was concentrated on the anteromedial and lateral aspect of condyle. In the balancing condyle, tensile and compressive forces were concentrated on the lateral aspect of the condylar articular surface and stress transmission to the temporal bone was not observed. 2. When lateral forces were applied to the first molar, tensile forces were concentrated on the medial aspect of the condylar neck and condylar posterior surface in working and balancing condyle. Compressive force was concentrated on the anteromedial and lateral surface of the condyle and stress transmission to the temporal bone was not observed. 3. During unilateral clenching, stress in the working condyle decreased as the occlusal load moved posteriorly while the stress in the balancing condyle increased. when lateral force was applied to first molar, the incremental amount of stress was greater than vertical load. 4. During unilateral clenching, the average balancing/working condyle stress ratio was 2.52. There was a greater concentration of stress in the balancing condyle. The ratio increased as the occlusal load moved posteriorly and decreased considerably when lateral forces were applied to the first molar.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.6
• /
• pp.577-589
• /
• 2002

There are several variations in normal mastication. In them, unilateral mastication is chewing, predominantly on a preferred side of the dentition and hardly on e non-preferred side. Continual unilateral mastication may alter the coordination of masticatory muscles. Although they studied about these EMG of masticatory muscles, there were no information about characteristics of masticatory muscle activity in unilateral mastication. Therefore, In this study, we investigated the activity of the masseter and anterior temporal muscles during rest, clenching in maximum intercuspation and gum chewing in habitually unilateral mastication group compared with normal group and tried to know effects of continual unilateral mastication on activity of masticatory muscles. The results of this study were as follows 1. In electromyographic activity during rest, in bilateral mastication group pattern of muscle activity of right and left side was symmetrical. But, in unilateral mastication group, records of anterior part of temporal muscle was higher than that of bilateral mastication group (p<.01) and patterns of muscle activity of right and left side in both muscle were asymmetrical.(p<.05) 2. In electromyographic activity during clenching in maximum intercuspation, records of superficial part of masseter muscle were higher than anterior part of temporal muscle in both group. Muscle activity of temporal muscle in unilateral mastication group was a little higher han bilateral mastication group and asymmetry of activity pattern in temporal and masseter muscle was shown but these differences were not statistically significant. (p<.05) 3. In electromyographic activity during gum chewing, temporal muscle was activated earlier than masseter muscle and maximum bite force is derived from masseter muscle in both group. In unilateral mastication group, electromyographic activity of masseter and temporal muscle of preferred chewing side, regardless of right or left side chewing, was higher than that of bilateral mastication group and especially, difference in masseter muscle was statistically significant. (p<.01) Based on the above results, our study suggested that recording of masticatory muscle activity will be helpful in the effective diagnosis and treatment of some types of the parafunctional habits.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.245-256
• /
• 2001

The purpose of this study is to analyze the mechanical stress and displacement on the jaws during the simulated bilateral clenching task on the three-dimensional finite element model of the dentated skull with unilateral molar loss. For this study, the computed tomography(G.E.8800 Quick, USA) was used to scan the total length of human skull in the frontal plane at 2.0mm intervals. The fully assembled finite element model consists of the articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. The FE model was used to simulate the bilateral clenching in intercuspal position. The loading condition was the force of the masseter muscle exerted on the mandible as reported by Korioth et al. degrees of freedom of the zygomatic region where the masseter muscle is attached were fixed as restraints. In order to reflect the actual action of the muscles force, the displacement of the region was attached where the muscle is connected to the temporal bone and restraint conditions were given values identical to values at the attachment region of the masticatory muscle but with the opposite direction of the reaction from when the muscle force is acted on the mandible. Although the mandible generally has higher displacement and von Mises stress than the maxilla, its mandibular corpus on the molar-loss side has a higher stress and displacement than the molar-presence side. Because the displacement and von Mises Stress was the highest on the lateral surface of mandibular corpus with molar loss, the stress level of the condyle on the molar-loss side is greater than that of the molar-presence side, which in turn caused the symphysis of the mandible to bend. In conclusion, the unilateral posterior bite collapse with molar loss under para-functional activities such as bruxism and clenching can affect the stress concentration on the condyle and mandibular corpus. It is therefore necessary to consider the biomechanical function of dento-skeleton under masticatory force while designing the occlusal scheme of restoration on alveolar bone with the posterior collapse.

• Journal of Oral Medicine and Pain
• /
• v.12 no.1
• /
• pp.53-61
• /
• 1987

In order to evaluate the effect of unilateral tooth clenching, the author observed a feature of producing the symptom complex related to pain and discomfort by the isometric unilateral canine biting under force of 5kg(FS) in Korean 31 adult females within normal masticatory function who were divided into the bilateral, the right and the left group according to their habitual sides of mastication, and analyzed the observed data statistically. The obtained results were as follows: 1. The duration of the isometric unilateral canine biting maintained before the occurrence of symptom complex related to pain and discomfort 66.72 seconds at right side and 39.50 seconds at left side in a group of subjects with bilateral habitual mastication. And the difference of the duration between of unilateral biting side was almost significant (P<0.05). 2. The most frequent region of occurrence of symptom complex related to pain and discomfort by the isometric unilateral canine biting was the contralateral superficial masseter muscle in a group of subjects with bilateral habitual mastication.

• Journal of Oral Medicine and Pain
• /
• v.33 no.1
• /
• pp.85-95
• /
• 2008

The purpose of this study was to evaluate the effects of oral habits on the muscles of mastication and facial expression by means of two parameters: muscle stiffness and elasticity. 10 healthy, fully-dentate male subjects in their twenties were selected for this study; all had normal Class I occlusal relationships. Muscle stiffness and elasticity were measured with a tactile sensor(Venustron, Axiom Co., JAPAN) while subjects were asked to relax and perform various parafunctional activities such unilateral clenching(biting the bite force recorder with a force of 50kg on each subject's preferred side), jaw thrusting and lip bracing. The following muscles were examined: temporalis anterior(Ta), masseter(Mm), frontalis(Fr), inferior orbicularis oculi(OOci), zygomaticus major(Zm), superior and inferior orbularis oris(OOrs and OOri) and mentalis(Mn). Paired t-test, Correlation Coefficients, ANOVA and Multiple Comparison t-tests were used for statistical analysis. Unilateral clenching was highly correlated with bilateral stiffness and elasticity of all the muscles tested. Mm was affected by all three oral habits; Ta was affected by unilateral clenching(p<0.05); Zm was affected by unilateral clenching and OOrs, OOri and Mn were most affected by lip bracing(p<0.05). This study indicates that not only the masticatory muscles but also the muscles of facial expression, mainly circumoral muscles, can be significantly influenced by parafunctional activities such as unilateral clenching and lip bracing.

• The Journal of the Korean dental association
• /
• v.15 no.3
• /
• pp.205-208
• /
• 1977

The etiology of masseteric hypertrophy is obscure. When the hypertrophy occurs unilaterally it's appearance is more striking because of the resultant facial asymmetry. Two soldiers were admitted with the complaint of a lump on their jaws. The authors obtained good results on the esthetic & functional aspect in two cases of unilateral masseteric hypertrophy with the Adam's method. The etiology was thought to be the combination of unilateral masticatory and jaw clenching habits when emotionally disturbed or under nervous tension in army services.

• Journal of Oral Medicine and Pain
• /
• v.38 no.2
• /
• pp.175-185
• /
• 2013

Objective : Condyle hypoplasia in temporomandibular joint(TMJ) is often observed in several radiographic views. Mandibular Condyle hypoplasia is frequently confused with osteoarthritis with bony changes in TMJ. This paper investigated clinical characteristics of mandibular condyle hypoplasia as compared with TMJ osteoarthritis. Material and method : 276 patients with TMD were taken clinical and radiological examination and were divided into study group, 189 patients diagnosed with mandibular condyle hypoplasia, and control group, 87 patients diagnosed with TMJ osteoarthritis. And clinical features(Onset, Overjet, Overbite, Noise, Locking, NAS of noise, LOM, pain, MCO, and site of diagnosis and pain)of the two groups were compared. Results : 1. Mandibular condyle hypoplasia and TMJ osteoarthritis were similar in many of the clinical features. 2. Mandibular condyle hypoplasia concordance rates of the radiographic diagnosis site and the pain site was significantly lower than TMJ osteoarthritis. 3. Bilateral mandibular condyle hypoplasia group had more occlusal discomfort, and clenching habits than unilateral mandibular condyle hypoplasia group. 4. Unilateral mandibular condyle hypoplasia group had more unilateral chewing habits and LOM than unilateral TMJ osteoarthritis group. Unilateral TMJ osteoarthritis group had more morning stiffness and higher concordance rates of the radiographic diagnosis site and the click sound site than unilateral mandibular condyle hypoplasia group. 5. Bilateral mandibular condyle hypoplasia group had more usual headaches and overjet than bilateral TMJ osteoarthritis group. Conclusion : Mandibular condyle hypoplasia has somewhat distinguishing clinical characteristics as compared with TMJ osteoarthritis.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.2
• /
• pp.75-84
• /
• 2001

The purpose of this study is to to analyze the mechanical stress on articular disk of the dentated skull with the condition of unilateral posterior molar missing. For this study, the three dimensional finite element model of human skull scanned by means of computed tomography. (G.E. 8800 Quick, USA) was constructed. The finite element model of jaws is composed of 98,394 elements and 38,321 nodes, and it consists of articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. Boundary condition included rigid restraints at the first molar and endosteal cortical surfaces of the insertion points of temporal bone. The data derived from Nelson's study were used for the loading conditions of mandible during clenchings and for maxilla, new loading and constraint conditions were applied. A clenching task during intercuspal position was modeled to the three dimensional finite element model. The stress level and displacement of articualr disc on the model with unilateral posterior molar missing under bilateral clenching task can be analyzed. During bilateral clenchings, the compressive stress level and diplacement of the articular disk on the side of unilateral posterior molar missing is greater than that on the case with full dentition, whereas a higher stress was found on the disk on the balancing side of the full dentition. Although this kind of study is not enough to explain the role of occlusion as an etiologic factor of TMD, there may be a possibiliy that the condition of posterior molar missings may contribute in part to the TMJ biomechanics.