• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.109-113
• /
• 2011

Hot air flow simulations of the wet station dryer module for the solar cell cleaning were conducted. Air incident angles such as to the substrates ($45^{\circ}$), to the bottom ($90^{\circ}$), and to the wall ($135^{\circ}$) were considered. Based on the simulated velocity and temperature profiles, appropriate incident angle was proposed, and it was well matched to experimental results. Additionally, uniform and non-uniform air hole sizes of the tube were compared for the uniform air flow distribution through the batch.

• Journal of Ceramic Processing Research
• /
• v.19 no.5
• /
• pp.369-371
• /
• 2018

The uniform and monodisperse bismuth nanospheres were successfully prepared by simple and convenient solvothermal method. The bismuth nitrate was reduced by ethylene glycol at $150-200^{\circ}C$ for 20-30 hrs. The nanospheres were characterized by powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The dispersivity of bismuth nanospheres was investigated using optical microscope. The optimum reaction conditions to prepare the uniform bismuth nanospheres with a narrow diameter range was investigated. The results indicate that the monodisperse bismuth nanospheres prepared at $200^{\circ}C$ possess sizes ranging from 100-200 nm. The formation mechanism of the bismuth nanospheres was hypothesized.

• International Journal of Reliability and Applications
• /
• v.2 no.3
• /
• pp.209-240
• /
• 2001

Computer-based simulation and analysis is used extensively in engineering for a variety of tasks. Despite the steady and continuing growth of computing power and speed, the computational cost of complex high-fidelity engineering analyses and simulations limit their use in important areas like design optimization and reliability analysis. Statistical approximation techniques such as design of experiments and response surface methodology are becoming widely used in engineering to minimize the computational expense of running such computer analyses and circumvent many of these limitations. In this paper, we compare and contrast five experimental design types and four approximation model types in terms of their capability to generate accurate approximations for two engineering applications with typical engineering behaviors and a wide range of nonlinearity. The first example involves the analysis of a two-member frame that has three input variables and three responses of interest. The second example simulates the roll-over potential of a semi-tractor-trailer for different combinations of input variables and braking and steering levels. Detailed error analysis reveals that uniform designs provide good sampling for generating accurate approximations using different sample sizes while kriging models provide accurate approximations that are robust for use with a variety of experimental designs and sample sizes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.6 s.249
• /
• pp.594-601
• /
• 2006

Optimization study has been carried out to design an energy efficient, high temperature vacuum furnace which satisfies users' design requirements. First of all, the transient temperature distribution and the uniform temperature zone results have been compared with the steady state results to validate the feasibility of using steady state solution when constructing the thermal analysis DB. In order to check the accuracy, the interpolated results using thermal analysis DB have been compared with the computational and the experimental results. In this study, total heat flux is selected as the objective function, and the geometry parameters of vacuum furnace including the thickness of insulator, the heat zone sizes and the interval between heater and insulator are the design variables. The Uniform temperature zone sizes and the wall temperature are imposed as the design constraints. With negligible computational cost a high temperature vacuum furnace which has $40\sim60%$ reduction in total heat flux is designed using thermal analysis DB.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.431-440
• /
• 2001

Generated agri-chemical droplets by orchard sprayers are evaporated regenerated and transported along wind streams. The droplets are deposited to targets after changing their sizes, affecting the retention of droplets. An orchard sprayer, designed for spraying grapevines was studied on the spatial distribution of droplet size. The experimental variables were spray direction (0, 22.5, 45, 67.5 and 90˚), distance(2.5, 3.0 and 3.5 m) and fan speed (2,075 and 3,031 rpm). Droplet sizes were converted and analyzed from spray stains, sampled using water sensitive papers. The number median diameter (NMD) increased with an increase of the distance due to disappeared fine droplets (<50 ㎛): however, the volume median diameter (VMD) decreased due to shrunken large droplets (>100 ㎛). Fast fan speed delivered large droplets to 3.5 m, but the spatial distributions of NMD and VMD were not uniform. Slower fan speed decreased the possibility of evaporation and drift; therefore, plenty of droplets were maintained up to 3.0 m. The upward blasting distance was limited within 3 m, but the limit to the ground level was extended to 3.5 m. Concentrated wind and droplets to the ground level should be redistributed to upper canopy direction, leading more uniform deposits. High speed wind and system pressure should be avoided because of generating fine droplets, which would be disappeared and drifted away.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.1035-1041
• /
• 2016

Internal cracks in products are invisible and can lead to fatal crashes or damage. Since X-rays can penetrate materials and be attenuated according to the material’s thickness and density, they have rapidly become the accepted technology for non-destructive inspection of internal cracks. This paper presents a robust crack filter based on local gray level variation and multiscale analysis for automatic detection of cracks in X-ray images. The proposed filter takes advantage of the image gray level and its local variations to detect cracks in the X-ray image. To overcome the problems of image noise and the non-uniform intensity of the X-ray image, a new method of estimating the local gray level variation is proposed in this paper. In order to detect various sizes of crack, this paper proposes using different neighboring distances to construct an image pyramid for multiscale analysis. By use of local gray level variation and multiscale analysis, the proposed crack filter is able to detect cracks of various sizes in X-ray images while contending with the problems of noise and non-uniform intensity. Experimental results show that the proposed crack filter outperforms the Gaussian model based crack filter and the LBP model based method in terms of detection accuracy, false detection ratio and processing speed.

• The Korean Journal of Community Living Science
• /
• v.17 no.3
• /
• pp.15-28
• /
• 2006

This study is on the kindergarten uniforms in Changwon, south Gyeongsang province. The first part of this research is on whether or not students should wear uniforms and how often they should wear uniforms. The research also deals with what types of uniforms are required, how much they should cost and their size. Fifty one preschools including kindergarten and nursery were targeted for this research. The second part of the research is on the discrepancy of the labeled size and the actual size of the child. The results of the first part are as follows: A total of 46 out of 51 places adopted uniforms for their children. Sports wear style is the most popular for spring, fall and summer uniforms. For wearing frequency of kindergarten uniforms, 26 (61%) places allowed the students to wear uniforms for special events such as picnics or observation trips 17(34%) places had the students wear their uniforms on a daily basis and 2 3 times only wearing a week.'rho preschool children interviewed for this study were from 2 to 5 in lull age. However, sizes with high frequency rates were 9 to 11 and the supplied sizes of uniforms were from 5 to 17. The results of the second part are as follows: The bust girth and the shoulder width of upper garments of uniforms are bigger than children's physical size, while clothes length and sleeve length are relatively shorter. Also the bust girth of upper garments of uniforms differs in the size depending on each preschool. The waist girth and the total length of lower garments of uniforms are made smaller than children's physical sizes, while hip girth is relatively larger. In the case of lower garments, the rest parts of cloth length are smaller than upper garments of uniforms. Also, the waist girth and hip width of uniforms are smaller than those of lower garments In summer garments, while thigh width is similar in both cases. The waist width is made too small. Described in the above excluding the waist width, the rest parts are relatively larger than children's physical sizes, but shorter in the length. Due to the length, children at age 7 may wear uniforms in the level of 17. Since summer uniforms touch the students' bare skin, the rest parts excluding clothes length are shorter than these of the spring and fall uniforms. In the case of clothes length, it seems to be due to different designs. The waist width of lower garments in all the uniforms tested in this study is too small for children, requiring them to be made in a larger size.

• The Research Journal of the Costume Culture
• /
• v.16 no.2
• /
• pp.278-292
• /
• 2008

The purpose of this study is to propose apparel sizing system for each body shape of early adolescent boys. The subjects of this study were 549 boys in the capital area. Their body shapes were classified based on 47 anthropometric measurements, 43 photographic measurements and 10 indexed measurements. The apparel sizing system was proposed for each body shape. For data analysis were performed descriptive statistics, correlation analysis and crosstabulation using SPSS Ver. 12. The control dimensions to propose apparel sizing system were stature and waist circumference for the lower garments. Intervals between sizes were 5cm for stature and irregular for waist circumference. For each type, $5{\sim}8$ sizes were proposed for lower garments. Reference measurements suggested fur lower garments were 7 items. This study is meaningful in that it proposed apparel sizing system for each type of body shape. The results of this study are expected to contribute to planning sizes according to the type of body shape and improving the fitness of ready-made clothes in apparel and school uniform manufacturers.

• Journal of Powder Materials
• /
• v.24 no.5
• /
• pp.384-388
• /
• 2017

The effect of the mixing method on the characteristics of hybrid-structure W powder with nano and micro sizes is investigated. Fine $WO_3$ powders with sizes of ${\sim}0.6{\mu}m$, prepared by ball milling for 10 h, are mixed with pure W powder with sizes of $12{\mu}m$ by various mixing process. In the case of simple mixing with ball-milled $WO_3$ and micro sized W powders, $WO_3$ particles are locally present in the form of agglomerates in the surface of large W powders, but in the case of ball milling, a relatively uniform distribution of $WO_3$ particles is exhibited. The microstructural observation reveals that the ball milled $WO_3$ powder, heat-treated at $750^{\circ}C$ for 1 h in a hydrogen atmosphere, is fine W particles of ~200 nm or less. The powder mixture prepared by simple mixing and hydrogen reduction exhibits the formation of coarse W particles with agglomeration of the micro sized W powder on the surface. Conversely, in the powder mixture fabricated by ball milling and hydrogen reduction, a uniform distribution of fine W particles forming nano-micro sized hybrid structure is observed.

• Journal of the Korean Ceramic Society
• /
• v.20 no.3
• /
• pp.211-216
• /
• 1983

This work aims at characterizing silicon grains and its compacts. In order to remove iron silicon grains were washed with 5N hydrochloride at 60-7$0^{\circ}C$ for 170 hrs, and then followed the chemical analysis by atomic absorption spectrophotometer X-ray diffraction analysis SEM observation and specific surface area determination by B. E. T. Mixtures of graded silicon particles with two or three different sizes were made into packings by mechanical vibration. The mixtures were used to make compacts with 10 mm in diameter and 70mm in length by isostatically pressing at 1, 208 kg/$cm^2$ (20 kpsi) and 4, 255kg/$cm^2$ (60 kpsi) respectively. Bulk densities of packings and compacts were measured. A slip made of magnesium nitrate solution and fine silicon particles was spray-dried and then decomposed at 30$0^{\circ}C$ for the purpose of coating the uniform layer of magnesium oxide on the surface of particles. The results obtained are as follows: (1) About two thirds of iron content could be removed from silicon by washing silicon powders with hydrochloride. (2) Uniform layer of magnesium oxide on the surface of silicon could be prepared by spray-drying suspension and by decomposing it. (3) B. E. T. specific surface area of fine silicon particles was 2, 826.753$m^3$/kg. (4) In the binary system with two sizes of 40-53$\mu\textrm{m}$ particles and <10$\mu\textrm{m}$ particles the maximum bulk density of packing was 55% of theoretical value and that of compacts made at the pressure of 4, 255 kg./$cm^2$ (60 kpsi) was 73% of theoretical value. (5) In the ternary system with three sizes the maximum bulk density of packing was 1.43 g/$cm^3$and that of compacts was 1.80g/$cm^3$which is equivalent to 77.6% of theoretical value. The composition of the closest compact was consisted of 50% of 40-53$\mu\textrm{m}$ particles 20% of 10-30$\mu\textrm{m}$ particles and 30% of <10$\mu\textrm{m}$ parti-cles.