• 제목/요약/키워드: underwater repair

검색결과 40건 처리시간 0.155초

수중코팅제와 콘크리트 모재 간의 인장 부착 특성 (Tensile Bond Characteristics between Underwater Coating Materials and Concrete Substrate)

  • 김민욱;정연웅;강성훈;문주혁;이진학
    • 한국해안·해양공학회논문집
    • /
    • 제30권6호
    • /
    • pp.298-305
    • /
    • 2018
  • 본 연구에서는 해양 항만 콘크리트 구조물의 보수작업을 위한 수중코팅제의 부착 특성을 조사하기 위하여 실험적 연구를 수행하였다. 고려된 실험변수는 코팅제의 종류, 코팅대상 모재의 표면 거칠기, 도포 작업환경(육상 혹은 수중)으로 부착 강도는 Pull-off 방식으로 측정하였다. 코팅제의 부착 강도는 각 수중코팅제의 도포 작업 완료 24시간 후에 ASTM C1583 규정에 따라 측정하였다. 또한, 콘크리트 모재와 코팅제 간의 부착파괴 거동(코팅제, 계면, 콘크리트 모재)을 육안으로 관찰하였으며 측정된 부착 강도 수치에 근거하여 각 실험요인의 비교분석을 수행하였다. 실험결과, 수중에서 도포한 코팅제의 부착 강도가 육상의 경우에 비해 감소하는 경향을 보였으며 수중환경에서는 부착 강도에 미치는 모재 표면 거칠기의 영향이 육상의 경우에 비하여 미비하였다. 마지막으로 수중코팅제의 선정, 사용 시에 유의할 점에 대하여 설명하였다.

수중 구조물의 보수·보강을 위한 수중 접착제, 에폭시와 섬유복합재의 개발 (Development of Underwater Adhesive, Epoxy, and FRP Composite for Repair and Strengthening of Underwater Structure)

  • 김성배;이나현;남진원;변근주;김장호
    • 콘크리트학회논문집
    • /
    • 제22권2호
    • /
    • pp.149-158
    • /
    • 2010
  • 현재 육상 노출 콘크리트 구조물의 보수 및 보강공법에는 많은 신기술이 개발되었고 연구도 많이 진행되고 있으나, 수중에 존치되어 있는 구조물, 즉 교각, 부두 잔교 및 강관파일과 같이 해수 및 수중에 잠겨 있으며, 지속적인 하중을 받는 콘크리트 및 강재의 보수보강 기술에 대한 연구는 많지 않다. 그러므로 이 연구에서는 해수나 수중에 있는 구조물의 보수 보강 공법에 사용할 수 있는 수중 에폭시를 개발하였고, 이 에폭시 재료와 보강섬유을 이용하여 수중용 FRP 복합재를 개발하였다. 개발된 재료의 성능을 검증하기 위하여 다양한 기초물성에 대한 시험을 수행하였다. 성능시험 결과, 개발된 에폭시는 수중에서도 풀림이 거의 없고 부유물질이 발생하지 않는다. 또한 수중이라는 제약 조건 속에서도 30,000 cps 이상의 높은 점성을 갖기 때문에 우수한 작업성을 보이며, 수중에서도 육상에서와 거의 유사한 2 MPa 이상의 부착성능을 발휘하는 것으로 나타났다. 내화학성 시험 결과에서도 중량변화율은 약 0.5~1.0% 이내로 측정되어 우수한 내염 저항성을 확인하였다.

수중 센서 어레이에서 고 신뢰성을 고려한 신호 전송 시스템 설계 (A Design of Signal Transport System with High Reliability in an Underwater Sensor Array)

  • 손동환;정현주
    • 한국군사과학기술학회지
    • /
    • 제7권4호
    • /
    • pp.13-19
    • /
    • 2004
  • A system for detecting underwater target demands a high operational reliability because of the difficulty of maintenance and repair when the system has a few troubles during long operating period. Therefore, in this paper, we have proposed a signal transport system with a high reliability in an underwater sensor array system composed of magnetic and acoustic sensors. In this system, the nodes for signal transport are connected dually each other with single-hop construction and a magnetic sensor is connected to a couple of neighboring nodes. This enables the output signal to transport from a node to the next node and the next but one node. Also, the signal from a magnetic sensor can be transported to two nodes at the same time. Thus, the system with this construction makes possible to transport sensor data to another node which works normally when a transport node or cable have some faults and will operate normally although it happens some problems in a few signal transport nodes and connection cables.

멀티빔 센서를 이용한 사이드 스캔 소나 개발 : 센서 설계 (Development of the Side Scan Sonar Using the Multi-beam Sensors : Sensor Design)

  • 장유신;계중읍;조흥기;이만형
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제54권10호
    • /
    • pp.581-586
    • /
    • 2005
  • The multi-beam side scan sonar system uses the towfish installed sonars, it is an equipment that search images of the bottom surface of the sea in real time. It is a typical equipment that is related to a sea investigation such as a geological survey, seabed communication cable and power line cable placing repair investigation, fish breeding ground investigation, sea purification, relic and mineral investigation, and mine and submarine search. Recently, it is used to sea purification and geological survey that require information of the correct surface of the seabed. Therefore, this research develops multi-beam sensors for a side scan sonar that supply various information with the fast scan speed and correct high resolution that is not a simple underwater investigation equipment.

온도에 따른 수중경화형 에폭시수지의 레올로지 특성 (The Properties of Rheology of Underwater-Hardening Epoxy Resin According to the Temperature)

  • 정은혜;강철;곽은구;배기선;이대경;김진만
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
    • /
    • pp.49-52
    • /
    • 2006
  • Epoxy resin has less reaction shrinkage, has better water proofing and thermal resistance than other repairing materials, to it has been applied broadly to repair and finish buildings and infrastructures. Although the ambient temperature constructed is varied with the seasons and epoxy resin has to mix with appropriate hardener due to the non self-hardening, as the real construction of it, the ambient temperature is ignored and the blending ration of epoxy resin and hardener is fixed. Also, because of the hardening time is aimed to temperature condition and the tolerance of blending ratio, we investigated the variation of viscosity according to ambient temperatures and hardener ratios. As a results of study, we can select the economical blending ratio of the epoxy resin and hardener according to site situation.

  • PDF

HVDC 해저케이블 접속절차 (The Jointing Methode for HVDC Submarine Cable)

  • 안용호;장태인;전동훈;황갑철;정길조;김정년
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.748-749
    • /
    • 2007
  • HVDC(High Voltage Direct Current) is an underwater cable between Jeju Island and Haenam in main land and supplies approximately 50% of electrical usage in Jeju Island. If there is any power failure due to HVDC, it will cost approximately 50,000 US dollars per day including Thermal Electrical Generation. Therefore it is absolutely necessary to recover the problem in rapid timely basis. In conclusion, jointing methode of HVDC cable is needed urgently to upgrade current HVDC underwater cable repair technique in Korea to minimize the cost and time factors.

  • PDF

해양에 위치한 고속도로교량에 대한 내염보수 공법(2)-전기방식시공결과 (Repair of Highway Bridge damaged by Chloride Attack in Marine Environment(2) - Application of Cathodic Protection)

  • 지한상;한복규;정해문;안태송;류종현
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.786-789
    • /
    • 2004
  • Corrosion of reinforced concrete structures in marine environment is one of the most important mechanism of deterioration. However, conventional rehabilitation techniques in tidal zone, which consist of removing delaminated areas of concrete, cleaning affected steel and patching with portland cements mortar, have proven to be ineffective for marine structures. Also, repairs are often repeated every several years. The purpose of this report is to announce appropriate repair method of highway bridge damaged by chloride attack in marine environment (application of cathodic protection) using FRP and antiwashout underwater mortar.

  • PDF

Repair of Offshore Structures by Underwater Wet Welding Design and Fatigue Assessment

  • Krohn, A.;Petershagen, H.;Pohl, R.;Szelagowski, P.;Lafaye, G
    • Journal of Ship and Ocean Technology
    • /
    • 제1권1호
    • /
    • pp.26-34
    • /
    • 1997
  • Under water wet welding is an economically alternative for the repair of offshore structures. In this paper investigations on the fatigue strength of a wet welded pipe structural member have been reported. For the connection a special sleeve patch design has been developed. The joint was fatigue tested. The evaluation of the test was carried out by means of the hot-spot approach with regard to several extrapolation rules of the hot-spot stress. Obtained results have been compared to actual classfication rules and recommendations.

  • PDF

수중부 하부 구조의 보수 보강 (Examples for Underwater Repair and Strengthening of Bridge Substructures)

  • 유동우
    • 콘크리트학회지
    • /
    • 제13권2호
    • /
    • pp.38-43
    • /
    • 2001
  • 교량 하부구조 특히 교각 및 기초의 경우는 지반 또는 수중에 묻혀 있기 때문에 손상을 발견하기도 어렵고 또한 손상의 보수 및 보강이 곤란한 경우가 많다. 하부구조의 손상은 지반의 마모, 침하, 측방유동토압, 하상세굴, 홍수류, 선박 및 유하물에 의한 충격, 지진 등의 여러 원인에 의하여 발생된다. 이러한 손상은 지표수 및 지하수 배제공, 성토공, 지반개량공, 단면보수공, 세굴방지공, 내진보강공 등에 의하여 보수 및 보강이 행하여 진다. 본 고에서는 이러한 하부구조의 보수.보강공법 중 수중부에 실시되는 방법에 대하여 소개하고자 한다.

개선된 교량 기초세굴 점검방법 및 3D 하상지도 구축 연구 (A Study on Improved Inspection Method of the Foundation Scouring and Establishment of 3D Underwater Surface Map)

  • 최현철;고준영
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권5호
    • /
    • pp.161-170
    • /
    • 2022
  • 하천에 설치된 교량의 유지관리는 시설물 안전점검과 그 결과에 따른 보수·보강의 절차를 거쳐 이루어진다. 그 동안 교량 상부구조의 안전점검은 접근성이 용이하여 많은 연구들이 이루어져 왔으나, 하천에 설치된 교각 기초부의 세굴여부에 대하여는 직접조사가 곤란하여 이론에 근거한 관리에 머물러 왔다. 본 연구에서는 이러한 하천에 설치된 교량 기초의 세굴을 음향측심기 및 VRS 등을 활용하여 하상 지반고의 형상을 3D 형태로 구현하였다. 이로써 교량 설치 당시의 하상 지반고와 비교·분석 등을 통해 세굴양상에 대한 예측이 가능하게 되었다. 이 결과들을 바탕으로 해당 교각 기초의 국부세굴 여부 파악 및 장기하상저하 예측을 위한 초기치 자료로 활용한다면 기초세굴로 인한 교량붕괴를 예방할 수 있을 것으로 판단된다.