• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.258-261
• /
• 2010

기존의 수중음향통신모뎀은 상용 제품들을 기반으로 개발되어 수중음향통신모뎀의 기능 및 성능 구현은 가능하지만 개발 시스템을 제품화하기에는 시스템의 크기나 개발 비용 등에서 단일 플랫폼으로의 시스템 구현이 필수적으로 요구되었다. 따라서 본 논문에서는 수중음향통신모뎀의 단일 하드웨어 플랫폼을 구현함에 있어 중요한 역할을 하는 신호처리 모듈을 TigherSHARC DSP 칩을 이용하여 설계 및 구현하고자 한다.

• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.969-976
• /
• 2014

Nowadays, it is required for naval ships to estimate 3D underwater radiated noise pattern in all direction at peak frequencies of hull vibration for the reduction of being detected and doing the effective operation. For this purpose, the numerical method has to be developed to calculate 3D underwater radiated noise pattern with experimental data. It is very difficult to obtain the experimental data for the real ship. Alternative to get the experimental results is to use NAH(near-field acoustic holography) in acoustic tank with experimental model. Application of NAH in acoustic tank for the experimental model needs some investigation of reflection wave from the wall of the acoustic tank and unmeasured zone of the experimental model due to the supporting structure for it. In this study, the effect of reflection wave in the acoustic tank and unmeasured area of the experimental model when using the NAH was investigated with experiment and numerical model. From these, it is known for the error due to reflection wave can be reduced when the distance between the measurement plane and source is being shorten. Also, unmeasured area of the experimental model gives rise to some error in the estimation of the far-field acoustic pressure.

• 한국소음진동공학회논문집
• /
• 제24권11호
• /
• pp.907-918
• /
• 2014

In this study for the prediction of 3D underwater radiated noise pattern, a comparison between the proposed method(DHIE, Discrete Helmholtz Integral Equation) and the 3D underwater radiated noise calculation results using the measurement of near-field acoustic pressure data is performed. The near-field acoustic pressure in water is measured for the calculation of the far-field radiated noise pattern and the far-field acoustic power. Also the vibration field of the underwater structure is measured in simultaneously. Using the total far-field acoustic power and the vibration field on the surface of the structure, the proposed method(DHIE) can predict the underwater radiated noise pattern of the far-field The predicted results show the reasonable agreement within about 5dB comparing with the experiment result.

• 한국해양공학회지
• /
• 제22권2호
• /
• pp.65-71
• /
• 2008

Recently, many researches in relation to data transmission with faster speed and greater volume, many researches have been carried out on sonar systems for underwater communication. According to these researches, an acoustic transducer for underwater communication requires wide bandwidth properties. In domestic researches for underwater communication sonar, an operating frequency in the range of $20{\sim}40\;kHz$ is used. In this paper, we propose anon-resonance type acoustic transducer for underwater communication. The TVR (transmitting voltage response) characteristics increased linearly as the frequency increased, and the RVS (receiving voltage sensitivity) characteristics were constant as the frequency increased. Traditional techniques for wide bandwidth transducershave a limit and a transmission loss difference at lower and higher frequency operating ranges. In this paper, the new transducer proposed decreased the transmission loss under some conditions. It was optimized with the FE analysis tool (ATILA) and evaluated using the TVR and the RVS characteristics in the range of $10{\sim}90\;kHz$. The value of TVR was 138 dB at 20 kHz and 148 dB at 40 kHz, and the differences was 12 dB. The value of RVS was $195{\pm}2\;dB$ and nearly constant. From theseresults, it is certain that the developed transducers can be used for an underwater communication network in the 1.3 km range with both a 20 kHz bandwidth and 30 kHz center frequency.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.738-745
• /
• 2009

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes receive signal to make error floor. In this paper, we propose the underwater communication system using various channel coding schemes such as RS coding, convolutional code, turbo code and concatenated code for overcoming the multipath effect in underwater channel. As shown in simulation results, characteristic of multipath error is similar to that of random error. So interleaver has not effect on error correcting. For correcting of error floor by multipath, it is necessary to use strong channel codes like turbo code. Turbo code is one of the iterative codes. And the performance of concatenated codes including RS code has better performance than using singular channel codes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.558-563
• /
• 1992

Bearing information of target is used critically for target tracking in underwater environment. In passive sonar, target bearing measurements are obtained by processing the acoustic signal emanating from the target. PDA tracking algorithm is usually applied in this case since bearing measurements have several peaks due to interference with other acoustic sources or reflections from underwater media. In this paper, we propose a modified PDA algorithm adopting new probabilistic distributions of the number, position, and amplitude of peaks based on the analysis of real data. This algorithm is tested on real and artificially generated data. The computer simulation result shows improvement of the tracking performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.817-820
• /
• 2006

The Tonpilz transducer is one of the essential elements in active sonar application. The characteristics of transducer depend on the piezoelectric ceramics and mechanical elements such as head mass, tail mass, pre-stress rod and so on. One of the important characteristics is electric and mechanical stability of transducer for long term high power transmitting operation. This parer presents the results about long term endurance tests of the underwater acoustic transducer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.244-246
• /
• 2005

The Tonpiltz transducer is one of the essential elements in sonar application. The characteristics of transducer depend on the piezoelectric ceramics and mechanical elements such as head mass, tail mass, pre-stress rod and so on. One of the important characteristics is stable electric resistance for high power transmitting operation. This paper presents characteristics variation of the underwater acoustic transducer with material variation of electric decoupler.

• 한국전자통신학회논문지
• /
• 제12권6호
• /
• pp.997-1002
• /
• 2017

무선전파를 사용하는 지상통신과는 달리 1500[m/s] 속도의 음향채널이 사용되는 수중통신은 수중온도, 염도를 비롯한 통신환경에 민감할 뿐 아니라 3D 공간의 영향을 받는다. 3D 수중통신은 통신공간의 복잡성과 더불어 음파의 전파손실, 해저환경에서 발생되는 음향잡음 등에 민감하다. 본 연구에서는 이와 같은 3D 수중통신환경의 특성을 고려하여 3D 수중통신환경에서 운용되는 MANET을 대상으로 전송성능을 측정 분석하고 이를 토대로 수중 MANET 운용조건을 제시한다. 본 연구는 NS-2를 기반으로 구축한 수중통신 시뮬레이터를 사용하여 수행하며, 성능파라미터로는 처리율, 전송지연, 패킷손실율 및 소비에너지를 사용한다.

• 한국정보통신학회논문지
• /
• 제5권1호
• /
• pp.202-211
• /
• 2001

본 논문은 수중에서 초음파를 이용하여 데이터를 전송할 때 전체 전송성능에 영향을 주는 Multipath를 수학적으로 분석하였고, 분석된 결과를 이용하여 다중경로의 영향을 고려한 수중 초음파 영상통신 시스템을 설계하였다. 주파수 제약환경에 강인한$\pi/4 QPSK$ 알고리듬을 채택하였고, 수중 초음파 통신에서 발생하는 신호의 Ringing 효과를 상쇄하기 위하여 FM 변조방식을 가미한 Hybrid 변복조 시스템을 설계하였다. 또한, 다중경로의 영향을 상쇄하기 위하여 적응 등화기를 설계하였으며, Baseline PEG 기법을 이용하여 수중영상 압축에 대한 연구를 수행하였다.